mirror of
https://github.com/Valeh2012/PersonalVotingMachine
synced 2024-11-25 18:31:00 +02:00
318 lines
11 KiB
C
318 lines
11 KiB
C
|
/*
|
||
|
|
|
||
|
|
u8x8_d_ssd1318.c
|
||
|
|
|
||
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
||
|
|
|
||
|
|
Copyright (c) 2019, olikraus@gmail.com
|
||
|
|
All rights reserved.
|
||
|
|
|
||
|
|
Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
are permitted provided that the following conditions are met:
|
||
|
|
|
||
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
||
|
|
of conditions and the following disclaimer.
|
||
|
|
|
||
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
||
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
||
|
|
materials provided with the distribution.
|
||
|
|
|
||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
|
||
|
|
|
||
|
|
SSD1318: 128x96 OLED
|
||
|
|
|
||
|
|
https://github.com/olikraus/u8g2/issues/784
|
||
|
|
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
#include "u8x8.h"
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/* with internal charge pump (icp) */
|
||
|
|
static const uint8_t u8x8_d_ssd1318_128x96_icp_init_seq[] = {
|
||
|
|
|
||
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
|
|
||
|
|
|
||
|
|
U8X8_CA(0x0fd, 0x012), /* unlock */
|
||
|
|
U8X8_C(0x0ae), /* display off */
|
||
|
|
U8X8_CA(0x0ad, 0x0d0), /* external or internal IREF selection */
|
||
|
|
U8X8_CA(0x0a8, 0x05f), /* multiplex ratio, 96 duty */
|
||
|
|
U8X8_CA(0x0d3, 0x000), /* display offset */
|
||
|
|
U8X8_CA(0x0a2, 0x000), /* start line */
|
||
|
|
|
||
|
|
|
||
|
|
// four possible charge pump setting from as per sec 6.8.2 of the ssd1318 datasheet
|
||
|
|
// uncomment only one of the below for lines
|
||
|
|
// default:
|
||
|
|
// U8X8_CA(0x08d, 0x004, 0x0ac, 0x001), /* Charge pump setting from sec 6.8.2 of SSD1318 datasheet */
|
||
|
|
// U8X8_CA(0x08d, 0x044, 0x0ac, 0x001), /* Charge pump setting from sec 6.8.2 of SSD1318 datasheet */
|
||
|
|
// U8X8_CA(0x08d, 0x084, 0x0ac, 0x001), /* Charge pump setting from sec 6.8.2 of SSD1318 datasheet */
|
||
|
|
U8X8_CAAA(0x08d, 0x0c4, 0x0ac, 0x001), /* Charge pump setting from sec 6.8.2 of SSD1318 datasheet */
|
||
|
|
|
||
|
|
|
||
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
||
|
|
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
||
|
|
// Flipmode
|
||
|
|
// U8X8_C(0x0a0), /* segment remap a0/a1*/
|
||
|
|
// U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
||
|
|
|
||
|
|
U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
|
||
|
|
|
||
|
|
U8X8_CA(0x081, 0x00f), /* value from issue 784, seems to be a little bit low... */
|
||
|
|
|
||
|
|
|
||
|
|
U8X8_CA(0x0d5, 0x0d1), /* clock divide ratio (0x00=1) and oscillator frequency (0x8), value from issue 784 example code */
|
||
|
|
U8X8_CA(0x0d9, 0x022), /* [2] pre-charge period 0x022/f1, value from issue 784 example code */
|
||
|
|
U8X8_CA(0x0db, 0x030), /* vcomh deselect level, value from issue 784 example code */
|
||
|
|
|
||
|
|
|
||
|
|
//U8X8_CA(0x020, 0x000), /* page addressing mode */
|
||
|
|
//U8X8_C(0x02e), /* Deactivate scroll */
|
||
|
|
|
||
|
|
U8X8_C(0x0a4), /* output ram to display */
|
||
|
|
U8X8_C(0x0a6), /* none inverted normal display mode */
|
||
|
|
|
||
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
||
|
|
U8X8_END() /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
/* with external charge pump */
|
||
|
|
static const uint8_t u8x8_d_ssd1318_128x96_xcp_init_seq[] = {
|
||
|
|
|
||
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
|
|
||
|
|
|
||
|
|
U8X8_CA(0x0fd, 0x012), /* unlock */
|
||
|
|
U8X8_C(0x0ae), /* display off */
|
||
|
|
U8X8_CA(0x0ad, 0x0d0), /* external or internal IREF selection */
|
||
|
|
U8X8_CA(0x0a8, 0x05f), /* multiplex ratio, 96 duty */
|
||
|
|
U8X8_CA(0x0d3, 0x000), /* display offset */
|
||
|
|
U8X8_CA(0x0a2, 0x000), /* start line */
|
||
|
|
|
||
|
|
|
||
|
|
// not sure if we have to set something for external charge pump
|
||
|
|
// ...
|
||
|
|
|
||
|
|
|
||
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
||
|
|
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
||
|
|
// Flipmode
|
||
|
|
// U8X8_C(0x0a0), /* segment remap a0/a1*/
|
||
|
|
// U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
||
|
|
|
||
|
|
U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
|
||
|
|
|
||
|
|
U8X8_CA(0x081, 0x00f), /* value from issue 784, seems to be a little bit low... */
|
||
|
|
|
||
|
|
|
||
|
|
U8X8_CA(0x0d5, 0x0d1), /* clock divide ratio (0x00=1) and oscillator frequency (0x8), value from issue 784 example code */
|
||
|
|
U8X8_CA(0x0d9, 0x022), /* [2] pre-charge period 0x022/f1, value from issue 784 example code */
|
||
|
|
U8X8_CA(0x0db, 0x030), /* vcomh deselect level, value from issue 784 example code */
|
||
|
|
|
||
|
|
|
||
|
|
//U8X8_CA(0x020, 0x000), /* page addressing mode */
|
||
|
|
//U8X8_C(0x02e), /* Deactivate scroll */
|
||
|
|
|
||
|
|
U8X8_C(0x0a4), /* output ram to display */
|
||
|
|
U8X8_C(0x0a6), /* none inverted normal display mode */
|
||
|
|
|
||
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
||
|
|
U8X8_END() /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
static const uint8_t u8x8_d_ssd1318_128x96_powersave0_seq[] = {
|
||
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
|
U8X8_C(0x0af), /* display on */
|
||
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
||
|
|
U8X8_END() /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
static const uint8_t u8x8_d_ssd1318_128x96_powersave1_seq[] = {
|
||
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
|
U8X8_C(0x0ae), /* display off */
|
||
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
||
|
|
U8X8_END() /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
static const uint8_t u8x8_d_ssd1318_128x96_flip0_seq[] = {
|
||
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
||
|
|
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
||
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
||
|
|
U8X8_END() /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
static const uint8_t u8x8_d_ssd1318_128x96_flip1_seq[] = {
|
||
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||
|
|
U8X8_C(0x0a0), /* segment remap a0/a1*/
|
||
|
|
U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
||
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
||
|
|
U8X8_END() /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
static uint8_t u8x8_d_ssd1318_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||
|
|
{
|
||
|
|
uint8_t x, c;
|
||
|
|
uint8_t *ptr;
|
||
|
|
switch(msg)
|
||
|
|
{
|
||
|
|
/* handled by the calling function
|
||
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1318_128x96_display_info);
|
||
|
|
break;
|
||
|
|
*/
|
||
|
|
/* handled by the calling function
|
||
|
|
case U8X8_MSG_DISPLAY_INIT:
|
||
|
|
u8x8_d_helper_display_init(u8x8);
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_init_seq);
|
||
|
|
break;
|
||
|
|
*/
|
||
|
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
||
|
|
if ( arg_int == 0 )
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_powersave0_seq);
|
||
|
|
else
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_powersave1_seq);
|
||
|
|
break;
|
||
|
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
|
||
|
|
if ( arg_int == 0 )
|
||
|
|
{
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_flip0_seq);
|
||
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_flip1_seq);
|
||
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
#ifdef U8X8_WITH_SET_CONTRAST
|
||
|
|
case U8X8_MSG_DISPLAY_SET_CONTRAST:
|
||
|
|
u8x8_cad_StartTransfer(u8x8);
|
||
|
|
u8x8_cad_SendCmd(u8x8, 0x081 );
|
||
|
|
u8x8_cad_SendArg(u8x8, arg_int ); /* ssd1318 has range from 0 to 255 */
|
||
|
|
u8x8_cad_EndTransfer(u8x8);
|
||
|
|
break;
|
||
|
|
#endif
|
||
|
|
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
||
|
|
u8x8_cad_StartTransfer(u8x8);
|
||
|
|
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
|
||
|
|
x *= 8;
|
||
|
|
x += u8x8->x_offset;
|
||
|
|
|
||
|
|
u8x8_cad_SendCmd(u8x8, 0x040 ); /* set line offset to 0 */
|
||
|
|
|
||
|
|
u8x8_cad_SendCmd(u8x8, 0x010 | (x>>4) );
|
||
|
|
u8x8_cad_SendArg(u8x8, 0x000 | ((x&15))); /* probably wrong, should be SendCmd */
|
||
|
|
u8x8_cad_SendArg(u8x8, 0x0b0 | (((u8x8_tile_t *)arg_ptr)->y_pos)); /* probably wrong, should be SendCmd */
|
||
|
|
|
||
|
|
|
||
|
|
do
|
||
|
|
{
|
||
|
|
c = ((u8x8_tile_t *)arg_ptr)->cnt;
|
||
|
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
|
||
|
|
u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */
|
||
|
|
/*
|
||
|
|
do
|
||
|
|
{
|
||
|
|
u8x8_cad_SendData(u8x8, 8, ptr);
|
||
|
|
ptr += 8;
|
||
|
|
c--;
|
||
|
|
} while( c > 0 );
|
||
|
|
*/
|
||
|
|
arg_int--;
|
||
|
|
} while( arg_int > 0 );
|
||
|
|
|
||
|
|
u8x8_cad_EndTransfer(u8x8);
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
static const u8x8_display_info_t u8x8_ssd1318_128x96_display_info =
|
||
|
|
{
|
||
|
|
/* chip_enable_level = */ 0,
|
||
|
|
/* chip_disable_level = */ 1,
|
||
|
|
|
||
|
|
/* post_chip_enable_wait_ns = */ 20,
|
||
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
||
|
|
/* reset_pulse_width_ms = */ 100, /* SSD1306: 3 us */
|
||
|
|
/* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */
|
||
|
|
/* sda_setup_time_ns = */ 50, /* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */
|
||
|
|
/* sck_pulse_width_ns = */ 50, /* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */
|
||
|
|
/* sck_clock_hz = */ 8000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
||
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
||
|
|
/* i2c_bus_clock_100kHz = */ 4,
|
||
|
|
/* data_setup_time_ns = */ 40,
|
||
|
|
/* write_pulse_width_ns = */ 150, /* SSD1306: cycle time is 300ns, so use 300/2 = 150 */
|
||
|
|
/* tile_width = */ 16,
|
||
|
|
/* tile_hight = */ 12,
|
||
|
|
/* default_x_offset = */ 0,
|
||
|
|
/* flipmode_x_offset = */ 0,
|
||
|
|
/* pixel_width = */ 128,
|
||
|
|
/* pixel_height = */ 96
|
||
|
|
};
|
||
|
|
|
||
|
|
uint8_t u8x8_d_ssd1318_128x96(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||
|
|
{
|
||
|
|
|
||
|
|
if ( u8x8_d_ssd1318_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
||
|
|
return 1;
|
||
|
|
|
||
|
|
switch(msg)
|
||
|
|
{
|
||
|
|
case U8X8_MSG_DISPLAY_INIT:
|
||
|
|
u8x8_d_helper_display_init(u8x8);
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_icp_init_seq);
|
||
|
|
break;
|
||
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1318_128x96_display_info);
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
uint8_t u8x8_d_ssd1318_128x96_xcp(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||
|
|
{
|
||
|
|
|
||
|
|
if ( u8x8_d_ssd1318_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
||
|
|
return 1;
|
||
|
|
|
||
|
|
switch(msg)
|
||
|
|
{
|
||
|
|
case U8X8_MSG_DISPLAY_INIT:
|
||
|
|
u8x8_d_helper_display_init(u8x8);
|
||
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1318_128x96_xcp_init_seq);
|
||
|
|
break;
|
||
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1318_128x96_display_info);
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
return 1;
|
||
|
|
}
|