mirror of
https://github.com/Valeh2012/PersonalVotingMachine
synced 2025-12-09 18:35:11 +02:00
first commit
This commit is contained in:
valeh
@@ -0,0 +1,167 @@
|
||||
/*
|
||||
|
||||
A2Printer.ino
|
||||
|
||||
This is a special example for the A2 Thermo Printer
|
||||
This example can NOT be used with LCDs and OLEDs
|
||||
|
||||
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
||||
|
||||
Copyright (c) 2016, olikraus@gmail.com
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright notice, this list
|
||||
of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright notice, this
|
||||
list of conditions and the following disclaimer in the documentation and/or other
|
||||
materials provided with the distribution.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||||
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
*/
|
||||
|
||||
// use this serial interface
|
||||
#define PRINTER_SERIAL Serial
|
||||
// #define PRINTER_SERIAL Serial1
|
||||
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <U8g2lib.h>
|
||||
|
||||
#ifdef U8X8_HAVE_HW_SPI
|
||||
#include <SPI.h>
|
||||
#endif
|
||||
#ifdef U8X8_HAVE_HW_I2C
|
||||
#include <Wire.h>
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
/* define our own serial function, this will be assigned later */
|
||||
|
||||
extern "C" uint8_t u8x8_byte_arduino_serial(u8x8_t *u8g2, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
uint8_t *data;
|
||||
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_BYTE_SEND:
|
||||
data = (uint8_t *)arg_ptr;
|
||||
while( arg_int > 0 )
|
||||
{
|
||||
while(PRINTER_SERIAL.available() > 0)
|
||||
PRINTER_SERIAL.read();
|
||||
PRINTER_SERIAL.write((uint8_t)*data);
|
||||
data++;
|
||||
arg_int--;
|
||||
}
|
||||
break;
|
||||
|
||||
case U8X8_MSG_BYTE_INIT:
|
||||
delay(1000);
|
||||
PRINTER_SERIAL.begin(19200);
|
||||
/* send something.... */
|
||||
//PRINTER_SERIAL.begin(9600);
|
||||
PRINTER_SERIAL.write(27); /* ESC */
|
||||
PRINTER_SERIAL.write(64); /* @ --> reset printer */
|
||||
delay(1000);
|
||||
|
||||
break;
|
||||
|
||||
case U8X8_MSG_BYTE_SET_DC:
|
||||
break;
|
||||
|
||||
case U8X8_MSG_BYTE_START_TRANSFER:
|
||||
break;
|
||||
|
||||
case U8X8_MSG_BYTE_END_TRANSFER:
|
||||
break;
|
||||
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* define a u8g2 object just with the base class */
|
||||
/* the baseclass will be configured for the A2 printer in the setup() procedure */
|
||||
class U8G2 u8g2;
|
||||
|
||||
void setup(void) {
|
||||
|
||||
u8g2_Setup_a2printer_384x240_1( /* several different a2 printer procs exist... */
|
||||
u8g2.getU8g2(), /* this is a c call, so use the u8g2 struct instead of the class */
|
||||
U8G2_R0, /* this defines the usual rotation of the bitmap */
|
||||
u8x8_byte_arduino_serial, /* this is the new procedure from above */
|
||||
u8x8_gpio_and_delay_arduino); /* standard arduino low level proc, used only for delay */
|
||||
|
||||
u8g2.beginSimple(); /* Do not clear the display, wake is not required */
|
||||
}
|
||||
|
||||
#define XO 10
|
||||
|
||||
void drawLogo(void)
|
||||
{
|
||||
|
||||
u8g2.setFontMode(1); // Transparent
|
||||
u8g2.setFontDirection(0);
|
||||
u8g2.setFont(u8g2_font_inb24_mf);
|
||||
u8g2.drawStr(0+XO, 30, "U");
|
||||
|
||||
u8g2.setFontDirection(1);
|
||||
u8g2.setFont(u8g2_font_inb30_mn);
|
||||
u8g2.drawStr(21+XO,8,"8");
|
||||
|
||||
u8g2.setFontDirection(0);
|
||||
u8g2.setFont(u8g2_font_inb24_mf);
|
||||
u8g2.drawStr(51+XO,30,"g");
|
||||
u8g2.drawStr(67+XO,30,"\xb2");
|
||||
|
||||
u8g2.drawHLine(2+XO, 35, 47);
|
||||
u8g2.drawHLine(3+XO, 36, 47);
|
||||
u8g2.drawVLine(45+XO, 32, 12);
|
||||
u8g2.drawVLine(46+XO, 33, 12);
|
||||
}
|
||||
|
||||
void drawURL(void)
|
||||
{
|
||||
u8g2.setFont(u8g2_font_6x12_tr);
|
||||
u8g2.drawStr(1+XO,54,"github.com/olikraus/u8g2");
|
||||
}
|
||||
|
||||
void loop(void) {
|
||||
u8g2.firstPage();
|
||||
do {
|
||||
drawLogo();
|
||||
drawURL();
|
||||
|
||||
/* worst case heating test */
|
||||
u8g2.drawRBox(4,90,384-8,20, 8);
|
||||
|
||||
/* heating test with some text */
|
||||
u8g2.setFont(u8g2_font_inb24_mf);
|
||||
u8g2.drawStr(10,160,"Hello World!");
|
||||
|
||||
/* draw a frame around the picture */
|
||||
u8g2.drawFrame(0,0,384,240);
|
||||
u8g2.drawFrame(1,1,384-2,240-2);
|
||||
} while ( u8g2.nextPage() );
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,286 @@
|
||||
|
||||
#
|
||||
# Arduino-1.0 Makefile
|
||||
#
|
||||
# written by olikraus@gmail.com
|
||||
#
|
||||
# Features:
|
||||
# - boards.txt is used to derive parameters
|
||||
# - All intermediate files are put into a separate directory (TMPDIRNAME)
|
||||
# - Simple use: Copy Makefile into the same directory of the .ino file
|
||||
#
|
||||
# Limitations:
|
||||
# - requires UNIX environment
|
||||
# - TMPDIRNAME must be subdirectory of the current directory.
|
||||
#
|
||||
# Targets
|
||||
# all build everything
|
||||
# upload build and upload to arduino
|
||||
# clean remove all temporary files (includes final hex file)
|
||||
#
|
||||
# History
|
||||
# 001 28 Apr 2010 first release
|
||||
# 002 05 Oct 2010 added 'uno'
|
||||
# 003 06 Dec 2011 arduino 1.0
|
||||
# 004 11 Feb 2012 u8glib
|
||||
#
|
||||
|
||||
#=== user configuration ===
|
||||
# All ...PATH variables must have a '/' at the end
|
||||
|
||||
# Board (and prozessor) information: see $(ARDUINO_PATH)hardware/arduino/boards.txt
|
||||
# Some examples:
|
||||
# BOARD DESCRIPTION
|
||||
# uno Arduino Uno
|
||||
# atmega328 Arduino Duemilanove or Nano w/ ATmega328
|
||||
# diecimila Arduino Diecimila, Duemilanove, or Nano w/ ATmega168
|
||||
# mega Arduino Mega
|
||||
# mega2560 Arduino Mega2560
|
||||
# mini Arduino Mini
|
||||
# lilypad328 LilyPad Arduino w/ ATmega328
|
||||
BOARD:=uno
|
||||
|
||||
# additional definitions
|
||||
#DEFS:=-DARDUINO=105
|
||||
|
||||
|
||||
U8G_PATH:=$(shell cd ../../../.. && pwd)/csrc/
|
||||
U8G_CPP_PATH:=$(shell cd ../../../.. && pwd)/cppsrc/
|
||||
#U8G_FONT_PATH:=$(shell cd ../../.. && pwd)/sfntsrc/
|
||||
|
||||
|
||||
# The location where the avr tools (e.g. avr-gcc) are located. Requires a '/' at the end.
|
||||
# Can be empty if all tools are accessable through the search path
|
||||
AVR_TOOLS_PATH:=/usr/bin/
|
||||
|
||||
# Install path of the arduino software. Requires a '/' at the end.
|
||||
ARDUINO_PATH:=/home/kraus/prg/arduino-1.0.5-u8glib/
|
||||
|
||||
# Install path for avrdude. Requires a '/' at the end. Can be empty if avrdude is in the search path.
|
||||
AVRDUDE_PATH:=$(ARDUINO_PATH)hardware/tools/
|
||||
|
||||
# The unix device where we can reach the arduino board
|
||||
# Uno: /dev/ttyACM0
|
||||
# Duemilanove: /dev/ttyUSB0
|
||||
AVRDUDE_PORT:=/dev/ttyACM0
|
||||
|
||||
# List of all libaries which should be included.
|
||||
EXTRA_DIRS=$(ARDUINO_PATH)libraries/LiquidCrystal/
|
||||
EXTRA_DIRS+=$(ARDUINO_PATH)libraries/SD/
|
||||
EXTRA_DIRS+=$(ARDUINO_PATH)libraries/SD/utility/
|
||||
EXTRA_DIRS+=$(ARDUINO_PATH)libraries/Wire/
|
||||
EXTRA_DIRS+=$(ARDUINO_PATH)libraries/Wire/utility/
|
||||
EXTRA_DIRS+=$(ARDUINO_PATH)libraries/SPI/
|
||||
#EXTRA_DIRS+=$(ARDUINO_PATH)libraries/.../
|
||||
|
||||
#=== fetch parameter from boards.txt processor parameter ===
|
||||
# the basic idea is to get most of the information from boards.txt
|
||||
|
||||
BOARDS_TXT:=$(ARDUINO_PATH)hardware/arduino/boards.txt
|
||||
|
||||
# get the MCU value from the $(BOARD).build.mcu variable. For the atmega328 board this is atmega328p
|
||||
MCU:=$(shell sed -n -e "s/$(BOARD).build.mcu=\(.*\)/\1/p" $(BOARDS_TXT))
|
||||
# get the F_CPU value from the $(BOARD).build.f_cpu variable. For the atmega328 board this is 16000000
|
||||
F_CPU:=$(shell sed -n -e "s/$(BOARD).build.f_cpu=\(.*\)/\1/p" $(BOARDS_TXT))
|
||||
# get variant subfolder
|
||||
VARIANT:=$(shell sed -n -e "s/$(BOARD).build.variant=\(.*\)/\1/p" $(BOARDS_TXT))
|
||||
|
||||
|
||||
# avrdude
|
||||
# get the AVRDUDE_UPLOAD_RATE value from the $(BOARD).upload.speed variable. For the atmega328 board this is 57600
|
||||
AVRDUDE_UPLOAD_RATE:=$(shell sed -n -e "s/$(BOARD).upload.speed=\(.*\)/\1/p" $(BOARDS_TXT))
|
||||
# get the AVRDUDE_PROGRAMMER value from the $(BOARD).upload.protocol variable. For the atmega328 board this is stk500
|
||||
AVRDUDE_PROGRAMMER:=$(shell sed -n -e "s/$(BOARD).upload.protocol=\(.*\)/\1/p" $(BOARDS_TXT))
|
||||
# use stk500v1, because stk500 will default to stk500v2
|
||||
#AVRDUDE_PROGRAMMER:=stk500v1
|
||||
|
||||
#=== identify user files ===
|
||||
INOSRC:=$(shell ls *.ino)
|
||||
TARGETNAME=$(basename $(INOSRC))
|
||||
|
||||
CDIRS:=$(EXTRA_DIRS) $(addsuffix utility/,$(EXTRA_DIRS))
|
||||
CDIRS:=*.c utility/*.c $(U8G_PATH)*.c $(addsuffix *.c,$(CDIRS)) $(ARDUINO_PATH)hardware/arduino/cores/arduino/*.c
|
||||
CSRC:=$(shell ls $(CDIRS) 2>/dev/null)
|
||||
|
||||
CCSRC:=$(shell ls *.cc 2>/dev/null)
|
||||
|
||||
CPPDIRS:=$(EXTRA_DIRS) $(addsuffix utility/,$(EXTRA_DIRS)) $(U8G_CPP_PATH)
|
||||
CPPDIRS:=*.cpp utility/*.cpp $(addsuffix *.cpp,$(CPPDIRS)) $(ARDUINO_PATH)hardware/arduino/cores/arduino/*.cpp
|
||||
CPPSRC:=$(shell ls $(CPPDIRS) 2>/dev/null)
|
||||
|
||||
#=== build internal variables ===
|
||||
|
||||
# the name of the subdirectory where everything is stored
|
||||
TMPDIRNAME:=tmp
|
||||
TMPDIRPATH:=$(TMPDIRNAME)/
|
||||
|
||||
AVRTOOLSPATH:=$(AVR_TOOLS_PATH)
|
||||
|
||||
OBJCOPY:=$(AVRTOOLSPATH)avr-objcopy
|
||||
OBJDUMP:=$(AVRTOOLSPATH)avr-objdump
|
||||
SIZE:=$(AVRTOOLSPATH)avr-size
|
||||
|
||||
CPPSRC:=$(addprefix $(TMPDIRPATH),$(INOSRC:.ino=.cpp)) $(CPPSRC)
|
||||
|
||||
COBJ:=$(CSRC:.c=.o)
|
||||
CCOBJ:=$(CCSRC:.cc=.o)
|
||||
CPPOBJ:=$(CPPSRC:.cpp=.o)
|
||||
|
||||
OBJFILES:=$(COBJ) $(CCOBJ) $(CPPOBJ)
|
||||
DIRS:= $(dir $(OBJFILES))
|
||||
|
||||
DEPFILES:=$(OBJFILES:.o=.d)
|
||||
# assembler files from avr-gcc -S
|
||||
ASSFILES:=$(OBJFILES:.o=.s)
|
||||
# disassembled object files with avr-objdump -S
|
||||
DISFILES:=$(OBJFILES:.o=.dis)
|
||||
|
||||
|
||||
LIBNAME:=$(TMPDIRPATH)$(TARGETNAME).a
|
||||
ELFNAME:=$(TMPDIRPATH)$(TARGETNAME).elf
|
||||
HEXNAME:=$(TMPDIRPATH)$(TARGETNAME).hex
|
||||
|
||||
AVRDUDE_FLAGS = -V -F
|
||||
AVRDUDE_FLAGS += -C $(ARDUINO_PATH)/hardware/tools/avrdude.conf
|
||||
AVRDUDE_FLAGS += -p $(MCU)
|
||||
AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
|
||||
AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
|
||||
AVRDUDE_FLAGS += -b $(AVRDUDE_UPLOAD_RATE)
|
||||
AVRDUDE_FLAGS += -U flash:w:$(HEXNAME)
|
||||
|
||||
AVRDUDE = $(AVRDUDE_PATH)avrdude
|
||||
|
||||
#=== predefined variable override ===
|
||||
# use "make -p -f/dev/null" to see the default rules and definitions
|
||||
|
||||
# Build C and C++ flags. Include path information must be placed here
|
||||
COMMON_FLAGS = -DF_CPU=$(F_CPU) -mmcu=$(MCU) $(DEFS) -DARDUINO=100 -DU8G2_16BIT
|
||||
# COMMON_FLAGS += -gdwarf-2
|
||||
COMMON_FLAGS += -Os
|
||||
COMMON_FLAGS += -Wall -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
|
||||
COMMON_FLAGS += -I$(ARDUINO_PATH)hardware/arduino/cores/arduino
|
||||
COMMON_FLAGS += -I$(ARDUINO_PATH)hardware/arduino/variants/$(VARIANT)
|
||||
COMMON_FLAGS += -I. -I$(U8G_PATH) -I$(U8G_CPP_PATH)
|
||||
COMMON_FLAGS += $(addprefix -I,$(EXTRA_DIRS))
|
||||
COMMON_FLAGS += -ffunction-sections -fdata-sections -Wl,--gc-sections
|
||||
COMMON_FLAGS += -Wl,--Map=output.map
|
||||
COMMON_FLAGS += -Wl,--relax
|
||||
COMMON_FLAGS += -mcall-prologues
|
||||
|
||||
CFLAGS = $(COMMON_FLAGS) -std=gnu99 -Wstrict-prototypes
|
||||
CXXFLAGS = $(COMMON_FLAGS)
|
||||
|
||||
# Replace standard build tools by avr tools
|
||||
CC = $(AVRTOOLSPATH)avr-gcc
|
||||
CXX = $(AVRTOOLSPATH)avr-g++
|
||||
AR = @$(AVRTOOLSPATH)avr-ar
|
||||
|
||||
|
||||
# "rm" must be able to delete a directory tree
|
||||
RM = rm -rf
|
||||
|
||||
#=== rules ===
|
||||
|
||||
# add rules for the C/C++ files where the .o file is placed in the TMPDIRPATH
|
||||
# reuse existing variables as far as possible
|
||||
|
||||
$(TMPDIRPATH)%.o: %.c
|
||||
@echo compile $<
|
||||
@$(COMPILE.c) $(OUTPUT_OPTION) $<
|
||||
|
||||
$(TMPDIRPATH)%.o: %.cc
|
||||
@echo compile $<
|
||||
@$(COMPILE.cc) $(OUTPUT_OPTION) $<
|
||||
|
||||
$(TMPDIRPATH)%.o: %.cpp
|
||||
@echo compile $<
|
||||
@$(COMPILE.cpp) $(OUTPUT_OPTION) $<
|
||||
|
||||
$(TMPDIRPATH)%.s: %.c
|
||||
@$(COMPILE.c) $(OUTPUT_OPTION) -S $<
|
||||
|
||||
$(TMPDIRPATH)%.s: %.cc
|
||||
@$(COMPILE.cc) $(OUTPUT_OPTION) -S $<
|
||||
|
||||
$(TMPDIRPATH)%.s: %.cpp
|
||||
@$(COMPILE.cpp) $(OUTPUT_OPTION) -S $<
|
||||
|
||||
$(TMPDIRPATH)%.dis: $(TMPDIRPATH)%.o
|
||||
@$(OBJDUMP) -S $< > $@
|
||||
|
||||
.SUFFIXES: .elf .hex .ino
|
||||
|
||||
.elf.hex:
|
||||
@$(OBJCOPY) -O ihex -R .eeprom $< $@
|
||||
|
||||
$(TMPDIRPATH)%.cpp: %.ino
|
||||
@cat $(ARDUINO_PATH)hardware/arduino/cores/arduino/main.cpp > $@
|
||||
@cat $< >> $@
|
||||
@echo >> $@
|
||||
@echo 'extern "C" void __cxa_pure_virtual() { while (1); }' >> $@
|
||||
|
||||
|
||||
.PHONY: all
|
||||
all: tmpdir $(HEXNAME) assemblersource showsize
|
||||
ls -al $(HEXNAME) $(ELFNAME)
|
||||
|
||||
$(ELFNAME): $(LIBNAME)($(addprefix $(TMPDIRPATH),$(OBJFILES)))
|
||||
$(LINK.o) $(COMMON_FLAGS) $(LIBNAME) $(LOADLIBES) $(LDLIBS) -o $@
|
||||
|
||||
$(LIBNAME)(): $(addprefix $(TMPDIRPATH),$(OBJFILES))
|
||||
|
||||
#=== create temp directory ===
|
||||
# not really required, because it will be also created during the dependency handling
|
||||
.PHONY: tmpdir
|
||||
tmpdir:
|
||||
@test -d $(TMPDIRPATH) || mkdir $(TMPDIRPATH)
|
||||
|
||||
#=== create assembler files for each C/C++ file ===
|
||||
.PHONY: assemblersource
|
||||
assemblersource: $(addprefix $(TMPDIRPATH),$(ASSFILES)) $(addprefix $(TMPDIRPATH),$(DISFILES))
|
||||
|
||||
|
||||
#=== show the section sizes of the ELF file ===
|
||||
.PHONY: showsize
|
||||
showsize: $(ELFNAME)
|
||||
$(SIZE) $<
|
||||
|
||||
#=== clean up target ===
|
||||
# this is simple: the TMPDIRPATH is removed
|
||||
.PHONY: clean
|
||||
clean:
|
||||
$(RM) $(TMPDIRPATH)
|
||||
|
||||
# Program the device.
|
||||
# step 1: reset the arduino board with the stty command
|
||||
# step 2: user avrdude to upload the software
|
||||
.PHONY: upload
|
||||
upload: $(HEXNAME)
|
||||
stty -F $(AVRDUDE_PORT) hupcl
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS)
|
||||
|
||||
|
||||
# === dependency handling ===
|
||||
# From the gnu make manual (section 4.14, Generating Prerequisites Automatically)
|
||||
# Additionally (because this will be the first executed rule) TMPDIRPATH is created here.
|
||||
# Instead of "sed" the "echo" command is used
|
||||
# cd $(TMPDIRPATH); mkdir -p $(DIRS) 2> /dev/null; cd ..
|
||||
DEPACTION=test -d $(TMPDIRPATH) || mkdir $(TMPDIRPATH);\
|
||||
mkdir -p $(addprefix $(TMPDIRPATH),$(DIRS));\
|
||||
set -e; echo -n $@ $(dir $@) > $@; $(CC) -MM $(COMMON_FLAGS) $< >> $@
|
||||
|
||||
|
||||
$(TMPDIRPATH)%.d: %.c
|
||||
@$(DEPACTION)
|
||||
|
||||
$(TMPDIRPATH)%.d: %.cc
|
||||
@$(DEPACTION)
|
||||
|
||||
$(TMPDIRPATH)%.d: %.cpp
|
||||
@$(DEPACTION)
|
||||
|
||||
# Include dependency files. If a .d file is missing, a warning is created and the .d file is created
|
||||
# This warning is not a problem (gnu make manual, section 3.3 Including Other Makefiles)
|
||||
-include $(addprefix $(TMPDIRPATH),$(DEPFILES))
|
||||
|
||||
|
||||
Reference in New Issue
Block a user