arti/PersonalVotingMachine
1
0
Fork 0
mirror of https://github.com/Valeh2012/PersonalVotingMachine synced 2024-11-25 18:31:00 +02:00
Code Issues Projects Releases Wiki Activity
master
PersonalVotingMachine/basic-setup/components/u8g2/csrc/u8x8_d_max7219.c
valeh 26b0ba5954 first commit
2020-12-22 14:30:09 +02:00

405 lines
14 KiB
C
Raw Permalink Blame History

/*
u8x8_d_max7219.c
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
Copyright (c) 2017, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "u8x8.h"
static const uint8_t u8x8_d_max7219_init_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_END_TRANSFER(), /* disable chip */
//U8X8_CA(12, 0), /* shutdown */
//U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_max7219_powersave0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_max7219_powersave1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static uint8_t u8x8_d_max7219_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
uint8_t c, j, i;
uint8_t *ptr;
switch(msg)
{
/* handled by the calling function
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_pcf8812_96x65_display_info);
break;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_init_seq);
break;
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave1_seq);
break;
*/
/* not supported by MAX7219
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
break;
*/
#ifdef U8X8_WITH_SET_CONTRAST
case U8X8_MSG_DISPLAY_SET_CONTRAST:
u8x8_cad_StartTransfer(u8x8);
for( i = 0; i < u8x8->display_info->tile_width; i++ )
{
u8x8_cad_SendCmd(u8x8, 10 ); /* brightness */
u8x8_cad_SendArg(u8x8, (arg_int>>4) ); /* 0..15 for contrast */
}
u8x8_cad_EndTransfer(u8x8);
break;
#endif
case U8X8_MSG_DISPLAY_DRAW_TILE:
/* transfer always has to start at x pos 0 (u8x8 is not supported) */
/* also y pos has to be 0 */
/* arg_int is ignored */
//x = ((u8x8_tile_t *)arg_ptr)->x_pos;
c = ((u8x8_tile_t *)arg_ptr)->cnt; /* number of tiles */
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; /* data ptr to the tiles */
for( i = 0; i < 8; i++ )
{
u8x8_cad_StartTransfer(u8x8);
for( j = 0; j < c; j++ )
{
u8x8_cad_SendCmd(u8x8, i+1);
u8x8_cad_SendArg(u8x8, *ptr );
ptr++;
}
u8x8_cad_EndTransfer(u8x8);
}
break;
default:
return 0;
}
return 1;
}
/*==============================*/
static const u8x8_display_info_t u8x8_max7219_32x8_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 100,
/* pre_chip_disable_wait_ns = */ 100,
/* reset_pulse_width_ms = */ 100,
/* post_reset_wait_ms = */ 100,
/* sda_setup_time_ns = */ 100,
/* sck_pulse_width_ns = */ 100,
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 40,
/* write_pulse_width_ns = */ 150,
/* tile_width = */ 4,
/* tile_hight = */ 1,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 32,
/* pixel_height = */ 8
};
uint8_t u8x8_d_max7219_32x8(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY :
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_max7219_32x8_display_info);
return 1;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_init_seq);
return 1;
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave1_seq);
return 1;
}
return u8x8_d_max7219_generic(u8x8, msg, arg_int, arg_ptr);
}
/*==============================*/
static const u8x8_display_info_t u8x8_max7219_8x8_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 100,
/* pre_chip_disable_wait_ns = */ 100,
/* reset_pulse_width_ms = */ 100,
/* post_reset_wait_ms = */ 100,
/* sda_setup_time_ns = */ 100,
/* sck_pulse_width_ns = */ 100,
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 40,
/* write_pulse_width_ns = */ 150,
/* tile_width = */ 1,
/* tile_hight = */ 1,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 8,
/* pixel_height = */ 8
};
uint8_t u8x8_d_max7219_8x8(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY :
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_max7219_8x8_display_info);
return 1;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_init_seq);
return 1;
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_powersave1_seq);
return 1;
}
return u8x8_d_max7219_generic(u8x8, msg, arg_int, arg_ptr);
}
/*==============================*/
static const uint8_t u8x8_d_max7219_8_init_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_CA(15, 0), /* test mode off */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_CA(12, 0), /* */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_CA(9, 0), /* decode mode: graphics */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_CA(10, 10), /* medium high intensity */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_CA(11, 7), /* scan limit: display all digits (assuming a 8x8 matrix) */
U8X8_END_TRANSFER(), /* disable chip */
//U8X8_CA(12, 0), /* shutdown */
//U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_max7219_8_powersave0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_CA(12, 1), /* display on */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_max7219_8_powersave1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_CA(12, 0), /* shutdown */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const u8x8_display_info_t u8x8_max7219_64x8_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 100,
/* pre_chip_disable_wait_ns = */ 100,
/* reset_pulse_width_ms = */ 100,
/* post_reset_wait_ms = */ 100,
/* sda_setup_time_ns = */ 100,
/* sck_pulse_width_ns = */ 100,
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 40,
/* write_pulse_width_ns = */ 150,
/* tile_width = */ 8,
/* tile_hight = */ 1,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 64,
/* pixel_height = */ 8
};
uint8_t u8x8_d_max7219_64x8(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY :
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_max7219_64x8_display_info);
return 1;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_8_init_seq);
return 1;
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_8_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_max7219_8_powersave1_seq);
return 1;
}
return u8x8_d_max7219_generic(u8x8, msg, arg_int, arg_ptr);
}
Reference in New Issue View Git Blame Copy Permalink