arti/PersonalVotingMachine
1
0
Fork 0
mirror of https://github.com/Valeh2012/PersonalVotingMachine synced 2024-11-25 18:31:00 +02:00
Code Issues Projects Releases Wiki Activity
master
PersonalVotingMachine/basic-setup/components/u8g2/csrc/u8x8_d_ssd1606_172x72.c
valeh 26b0ba5954 first commit
2020-12-22 14:30:09 +02:00

395 lines
13 KiB
C
Raw Permalink Blame History

/*
u8x8_d_ssd1606_172x72.c
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
Copyright (c) 2016, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SSD1606: 128x180x2
two-bit, four graylevels
command
0x22: assign actions
0x20: execute actions
action for command 0x022 are (more or less guessed)
bit 7: Enable Clock
bit 6: Enable Charge Pump
bit 5: Load Temparture Value (???)
bit 4: Load LUT (???)
bit 3: Initial Display (???)
bit 2: Pattern Display --> Requires about 945ms with the LUT from below
bit 1: Disable Charge Pump
bit 0: Disable Clock
Disable Charge Pump and Clock require about 267ms
Enable Charge Pump and Clock require about 10ms
Notes:
- Introduced a refresh display message, which copies RAM to display
- Charge pump and clock are only enabled for the transfer RAM to display
- U8x8 will not really work because of the two buffers in the SSD1606, however U8g2 should be ok.
*/
#include "u8x8.h"
#define L(a,b,c,d) (((a)<<6)|((b)<<4)|((c)<<2)|(d))
/* GDE021A1, 2.1" EPD */
static const uint8_t u8x8_d_ssd1606_172x72_gde021a1_init_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CA(0x10, 0x00), /* Deep Sleep mode Control: Disable */
U8X8_CA(0x11, 0x03), /* Define data entry mode, x&y inc, x first */
U8X8_CAA(0x44, 0, 31), /* RAM x start & end, each byte has 4 pixel, 32*4=128 */
U8X8_CAA(0x45, 0, 179), /* RAM y start & end, 179 MAX */
U8X8_CA(0x4e, 0), /* set x pos, 0..31 */
U8X8_CA(0x4f, 0), /* set y pos, 0...179 */
U8X8_CA(0xf0, 0x1f), /* set booster feedback to internal */
U8X8_CA(0x22, 0xc0), /* display update seq. option: enable clk, enable CP, .... todo: this is never activated */
U8X8_C(0x32), /* write LUT register*/
#ifdef ORIGINAL_LUT
/* wavefrom part of the LUT: absolute LUT... this will always force the destination color */
U8X8_A4(0x00,0x00,0x00,0x55), /* step 0 */
U8X8_A4(0x00,0x00,0x55,0x55), /* step 1 */
U8X8_A4(0x00,0x55,0x55,0x55),
U8X8_A4(0xAA,0xAA,0xAA,0xAA),
U8X8_A4(0x15,0x15,0x15,0x15),
U8X8_A4(0x05,0x05,0x05,0x05),
U8X8_A4(0x01,0x01,0x01,0x01),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00), /* step 19 */
/* timing part of the LUT */
U8X8_A8(0x22,0xFB,0x22,0x1B,0x00,0x00,0x00,0x00),
U8X8_A(0x00),U8X8_A(0x00),
#else
/* the following LUT will not change anything if the old and the new values are the same */
/* 03 02 01 00 13 12 11 10 23 22 21 20 33 32 31 30 original */
U8X8_A4(L(0, 0, 0, 0), L(0, 0, 0, 0), L(0, 0, 0, 0), L(0, 1, 1, 1)), // 0x00,0x00,0x00,0x55, step 0
U8X8_A4(L(0, 0, 0, 0), L(0, 0, 0, 0), L(1, 0, 1, 1), L(0, 1, 1, 1)), // 0x00,0x00,0x55,0x55, step 1
U8X8_A4(L(0, 0, 0, 0), L(1, 1, 0, 1), L(1, 0, 1, 1), L(0, 1, 1, 1)), // 0x00,0x55,0x55,0x55, step 2
U8X8_A4(L(2, 2, 2, 0), L(2, 2, 0, 2), L(2, 0, 2, 2), L(0, 2, 2, 2)), // 0xAA,0xAA,0xAA,0xAA, step 3
U8X8_A4(L(0, 1, 1, 0), L(0, 1, 0, 1), L(0, 0, 1, 1), L(0, 1, 1, 1)), // 0x15,0x15,0x15,0x15, step 4
U8X8_A4(L(0, 0, 1, 0), L(0, 0, 0, 1), L(0, 0, 1, 1), L(0, 0, 1, 1)), // 0x05,0x05,0x05,0x05, step 5
U8X8_A4(L(0, 0, 0, 0), L(0, 0, 0, 1), L(0, 0, 0, 1), L(0, 0, 0, 1)), // 0x01,0x01,0x01,0x01, step 6
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00),
U8X8_A4(0x00,0x00,0x00,0x00), /* step 19 */
/* timing part of the LUT */
U8X8_A8(0x22,0xFB,0x22,0x1B,0x00,0x00,0x00,0x00),
U8X8_A(0x00),U8X8_A(0x00),
#endif
U8X8_CA(0x2c, 0xa0), /* write vcom value*/
U8X8_CA(0x3c, 0x63), /* select boarder waveform */
U8X8_CA(0x22, 0xc4), /* display update seq. option: clk -> CP -> LUT -> initial display -> pattern display */
/* 0x0c4 is mentioned in chapter 9.2 of the GDE021A1 data sheet */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_ssd1606_to_display_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
//U8X8_CA(0x22, 0xc0), /* display update seq. option: Enable clock and charge pump */
//U8X8_C(0x20), /* execute sequence */
//U8X8_DLY(10),
/* strange, splitting 0x0c0 does not work reliable */
U8X8_CA(0x22, 0xc4), /* display update seq. option: clk -> CP -> LUT -> initial display -> pattern display */
U8X8_C(0x20), /* execute sequence */
U8X8_DLY(250), /* the sequence above requires about 970ms */
U8X8_DLY(250),
U8X8_DLY(250),
U8X8_DLY(230),
U8X8_CA(0x22, 0x03), /* disable clock and charge pump */
U8X8_DLY(200), /* this requres about 270ms */
U8X8_DLY(90),
//U8X8_CA(0x10, 0x01), /* deep sleep mode */
//U8X8_C(0x20), /* execute sequence */
U8X8_DLY(50),
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
// static const uint8_t u8x8_d_ssd1606_172x72_powersave0_seq[] = {
// U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
// U8X8_END_TRANSFER(), /* disable chip */
// U8X8_END() /* end of sequence */
// };
// static const uint8_t u8x8_d_ssd1606_172x72_powersave1_seq[] = {
// U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
// U8X8_END_TRANSFER(), /* disable chip */
// U8X8_END() /* end of sequence */
// };
// static const uint8_t u8x8_d_ssd1606_172x72_flip0_seq[] = {
// U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
// U8X8_END_TRANSFER(), /* disable chip */
// U8X8_END() /* end of sequence */
// };
// static const uint8_t u8x8_d_ssd1606_172x72_flip1_seq[] = {
// U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
// U8X8_END_TRANSFER(), /* disable chip */
// U8X8_END() /* end of sequence */
// };
static uint8_t *u8x8_convert_tile_for_ssd1606(uint8_t *t)
{
uint8_t i;
uint16_t r;
static uint8_t buf[16];
uint8_t *pbuf = buf;
for( i = 0; i < 8; i++ )
{
r = u8x8_upscale_byte(~(*t++));
*pbuf++ = (r>>8) & 255;
*pbuf++ = r & 255;
}
return buf;
}
static void u8x8_d_ssd1606_draw_tile(u8x8_t *u8x8, uint8_t arg_int, void *arg_ptr) U8X8_NOINLINE;
static void u8x8_d_ssd1606_draw_tile(u8x8_t *u8x8, uint8_t arg_int, void *arg_ptr)
{
uint8_t x, c, page;
uint8_t *ptr;
u8x8_cad_StartTransfer(u8x8);
page = u8x8->display_info->tile_height;
page --;
page -= (((u8x8_tile_t *)arg_ptr)->y_pos);
page *= 2;
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
x *= 8;
x += u8x8->x_offset;
u8x8_cad_SendCmd(u8x8, 0x00f ); /* scan start */
u8x8_cad_SendArg(u8x8, 0);
u8x8_cad_SendCmd(u8x8, 0x011 ); /* cursor increment mode */
u8x8_cad_SendArg(u8x8, 3);
u8x8_cad_SendCmd(u8x8, 0x045 ); /* window start column */
u8x8_cad_SendArg(u8x8, 0);
u8x8_cad_SendArg(u8x8, 179); /* end of display */
u8x8_cad_SendCmd(u8x8, 0x044 ); /* window end page */
u8x8_cad_SendArg(u8x8, page);
u8x8_cad_SendArg(u8x8, page+1);
u8x8_cad_SendCmd(u8x8, 0x04f ); /* window column */
u8x8_cad_SendArg(u8x8, x);
u8x8_cad_SendCmd(u8x8, 0x04e ); /* window row */
u8x8_cad_SendArg(u8x8, page);
u8x8_cad_SendCmd(u8x8, 0x024 );
do
{
c = ((u8x8_tile_t *)arg_ptr)->cnt;
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
do
{
u8x8_cad_SendData(u8x8, 16, u8x8_convert_tile_for_ssd1606(ptr));
ptr += 8;
x += 8;
c--;
} while( c > 0 );
arg_int--;
} while( arg_int > 0 );
u8x8_cad_EndTransfer(u8x8);
}
static uint8_t u8x8_d_ssd1606_172x72_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
/* handled by the calling function
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1606_172x72_display_info);
break;
*/
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1606_172x72_gde021a1_init_seq);
/* special code for the SSD1606... */
/* ensure that the initial buffer is clear and all eInk is set to white */
/* this is done here, because the LUT will be of that kind, that it uses the previous color */
/* make everything black */
u8x8_FillDisplay(u8x8);
/* write content to the display */
u8x8_RefreshDisplay(u8x8);
/* now make everything clear */
u8x8_FillDisplay(u8x8);
/* write content to the display */
u8x8_RefreshDisplay(u8x8);
/* now make everything clear */
u8x8_ClearDisplay(u8x8);
/* write content to the display */
u8x8_RefreshDisplay(u8x8);
u8x8_ClearDisplay(u8x8);
/* write content to the display */
u8x8_RefreshDisplay(u8x8);
break;
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
/*
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1606_172x72_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1606_172x72_powersave1_seq);
*/
break;
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
/*
if ( arg_int == 0 )
{
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1606_172x72_flip0_seq);
u8x8->x_offset = u8x8->display_info->default_x_offset;
}
else
{
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1606_172x72_flip1_seq);
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
}
*/
break;
#ifdef U8X8_WITH_SET_CONTRAST
case U8X8_MSG_DISPLAY_SET_CONTRAST:
/*
u8x8_cad_StartTransfer(u8x8);
u8x8_cad_EndTransfer(u8x8);
*/
break;
#endif
case U8X8_MSG_DISPLAY_DRAW_TILE:
u8x8_d_ssd1606_draw_tile(u8x8, arg_int, arg_ptr);
break;
case U8X8_MSG_DISPLAY_REFRESH:
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1606_to_display_seq);
break;
default:
return 0;
}
return 1;
}
static const u8x8_display_info_t u8x8_ssd1606_172x72_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 120,
/* pre_chip_disable_wait_ns = */ 60,
/* reset_pulse_width_ms = */ 100,
/* post_reset_wait_ms = */ 100,
/* sda_setup_time_ns = */ 50, /* SSD1606: */
/* sck_pulse_width_ns = */ 100, /* SSD1606: 100ns */
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 40,
/* write_pulse_width_ns = */ 150,
/* tile_width = */ 22, /* 22*8 = 176 */
/* tile_hight = */ 9, /* 9*8 = 72 */
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 172,
/* pixel_height = */ 72
};
uint8_t u8x8_d_ssd1606_172x72(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
{
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1606_172x72_display_info);
return 1;
}
return u8x8_d_ssd1606_172x72_generic(u8x8, msg, arg_int, arg_ptr);
}
Reference in New Issue View Git Blame Copy Permalink