mirror of
https://github.com/Valeh2012/PersonalVotingMachine
synced 2024-11-22 17:30:59 +02:00
182 lines
6.3 KiB
C
182 lines
6.3 KiB
C
/*
|
|
|
|
u8x8_d_a2printer.c
|
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
|
|
|
Copyright (c) 2016, olikraus@gmail.com
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
|
of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
|
materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
|
Use DC2 bitmap command of the A2 Micro panel termal printer
|
|
double stroke
|
|
|
|
|
|
*/
|
|
|
|
|
|
#include "u8x8.h"
|
|
|
|
#define LINE_MIN_DELAY_MS 15
|
|
/* higher values improve quality */
|
|
/* however if the value is too high (>=5) then form feed does not work any more */
|
|
#define LINE_EXTRA_8PIXEL_DELAY_MS 3
|
|
/* this must be a power of two and between 1 and 8 */
|
|
/* best quality only with 1 */
|
|
#define NO_OF_LINES_TO_SEND_WITHOUT_DELAY 1
|
|
|
|
/* calculates the delay, based on the number of black pixel */
|
|
/* actually only "none-zero" bytes are calculated which is, of course not so accurate, but should be good enough */
|
|
uint16_t get_delay_in_milliseconds(uint8_t cnt, uint8_t *data)
|
|
{
|
|
uint8_t i;
|
|
uint16_t time = LINE_MIN_DELAY_MS;
|
|
for ( i = 0; i < cnt; i++ )
|
|
if ( data[i] != 0 )
|
|
time += LINE_EXTRA_8PIXEL_DELAY_MS;
|
|
return time;
|
|
}
|
|
|
|
uint8_t u8x8_d_a2printer_common(u8x8_t *u8x8, uint8_t msg, U8X8_UNUSED uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t c, i, j;
|
|
uint8_t *ptr;
|
|
uint16_t delay_in_milliseconds;
|
|
switch(msg)
|
|
{
|
|
/* U8X8_MSG_DISPLAY_SETUP_MEMORY is handled by the calling function */
|
|
/*
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
break;
|
|
*/
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
// no setup required
|
|
// u8x8_cad_SendSequence(u8x8, u8x8_d_a2printer_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
|
// no powersave
|
|
break;
|
|
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
|
|
u8x8_cad_SendCmd(u8x8, 27); /* ESC */
|
|
u8x8_cad_SendCmd(u8x8, 55 ); /* parameter command */
|
|
/* increasing the "max printing dots" requires a good power supply, but LINE_EXTRA_8PIXEL_DELAY_MS could be reduced then */
|
|
u8x8_cad_SendCmd(u8x8, 0); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1) ... lower values improve, probably my current supply is not sufficient */
|
|
u8x8_cad_SendCmd(u8x8, 200); /* 3-255 Heating time,Unit(10us),Default:80(800us) */
|
|
u8x8_cad_SendCmd(u8x8, 2); /* 0-255 Heating interval,Unit(10us),Default:2(20us) ... does not have much influence */
|
|
|
|
//c = ((u8x8_tile_t *)arg_ptr)->cnt; /* number of tiles */
|
|
c = u8x8->display_info->tile_width;
|
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr; /* data ptr to the tiles */
|
|
|
|
u8x8_cad_SendCmd(u8x8, 18); /* DC2 */
|
|
u8x8_cad_SendCmd(u8x8, 42 ); /* * */
|
|
u8x8_cad_SendCmd(u8x8, 8 ); /* height */
|
|
u8x8_cad_SendCmd(u8x8, c ); /* c, u8x8->display_info->tile_width */
|
|
|
|
for( j = 0; j < 8 / NO_OF_LINES_TO_SEND_WITHOUT_DELAY; j ++ )
|
|
{
|
|
|
|
delay_in_milliseconds = 0;
|
|
for( i = 0; i < NO_OF_LINES_TO_SEND_WITHOUT_DELAY; i++ )
|
|
{
|
|
u8x8_cad_SendData(u8x8, c, ptr); /* c, note: SendData can not handle more than 255 bytes, send one line of data */
|
|
delay_in_milliseconds += get_delay_in_milliseconds(c, ptr);
|
|
ptr += c;
|
|
}
|
|
|
|
while( delay_in_milliseconds > 200 )
|
|
{
|
|
u8x8->gpio_and_delay_cb(u8x8, U8X8_MSG_DELAY_MILLI, 200, NULL);
|
|
delay_in_milliseconds -= 200;
|
|
}
|
|
u8x8->gpio_and_delay_cb(u8x8, U8X8_MSG_DELAY_MILLI, delay_in_milliseconds, NULL);
|
|
}
|
|
|
|
/* set parameters back to their default values */
|
|
u8x8_cad_SendCmd(u8x8, 27); /* ESC */
|
|
u8x8_cad_SendCmd(u8x8, 55 ); /* parameter command */
|
|
u8x8_cad_SendCmd(u8x8, 7); /* Max printing dots,Unit(8dots),Default:7(64 dots) 8*(x+1)*/
|
|
u8x8_cad_SendCmd(u8x8, 80); /* 3-255 Heating time,Unit(10us),Default:80(800us) */
|
|
u8x8_cad_SendCmd(u8x8, 2); /* 0-255 Heating interval,Unit(10us),Default:2(20us)*/
|
|
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
static const u8x8_display_info_t u8x8_a2printer_384x240_display_info =
|
|
{
|
|
/* most of the settings are not required, because this is a serial RS232 printer */
|
|
|
|
/* chip_enable_level = */ 1,
|
|
/* chip_disable_level = */ 0,
|
|
|
|
/* post_chip_enable_wait_ns = */ 5,
|
|
/* pre_chip_disable_wait_ns = */ 5,
|
|
/* reset_pulse_width_ms = */ 1,
|
|
/* post_reset_wait_ms = */ 6,
|
|
/* sda_setup_time_ns = */ 20,
|
|
/* sck_pulse_width_ns = */ 140,
|
|
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* old: sck_takeover_edge, new: active high (bit 1), rising edge (bit 0) */
|
|
/* i2c_bus_clock_100kHz = */ 4,
|
|
/* data_setup_time_ns = */ 30,
|
|
/* write_pulse_width_ns = */ 40,
|
|
/* tile_width = */ 48,
|
|
/* tile_hight = */ 30,
|
|
/* default_x_offset = */ 0,
|
|
/* flipmode_x_offset = */ 0,
|
|
/* pixel_width = */ 384,
|
|
/* pixel_height = */ 240
|
|
};
|
|
|
|
uint8_t u8x8_d_a2printer_384x240(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_a2printer_384x240_display_info);
|
|
break;
|
|
default:
|
|
return u8x8_d_a2printer_common(u8x8, msg, arg_int, arg_ptr);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|