Update alacritty

.config/alacritty/alacritty.yml

@@ -3,23 +3,23 @@
 # Any items in the `env` entry below will be added as
 # environment variables. Some entries may override variables
 # set by alacritty itself.
-env:
+#env:
   # TERM variable
   #
   # This value is used to set the `$TERM` environment variable for
   # each instance of Alacritty. If it is not present, alacritty will
   # check the local terminfo database and use `alacritty` if it is
   # available, otherwise `xterm-256color` is used.
-  TERM: xterm-256color
+  #TERM: alacritty
 
-window:
+#window:
   # Window dimensions (changes require restart)
   #
   # Specified in number of columns/lines, not pixels.
   # If both are `0`, this setting is ignored.
-  dimensions:
+  #dimensions:
-    columns: 0
+  #  columns: 0
-    lines: 0
+  #  lines: 0
 
   # Window position (changes require restart)
   #
@@ -33,12 +33,12 @@ window:
   #
   # Blank space added around the window in pixels. This padding is scaled
   # by DPI and the specified value is always added at both opposing sides.
-  padding:
+  #padding:
-    x: 2
+  #  x: 0
-    y: 2
+  #  y: 0
 
   # Spread additional padding evenly around the terminal content.
-  dynamic_padding: false
+  #dynamic_padding: false
 
   # Window decorations
   #
@@ -49,10 +49,34 @@ window:
   # Values for `decorations` (macOS only):
   #     - transparent: Title bar, transparent background and title bar buttons
   #     - buttonless: Title bar, transparent background, but no title bar buttons
-  decorations: full
+  #decorations: full
 
-  # When true, alacritty starts maximized.
+  # Startup Mode (changes require restart)
-  start_maximized: false
+  #
+  # Values for `startup_mode`:
+  #   - Windowed
+  #   - Maximized
+  #   - Fullscreen
+  #
+  # Values for `startup_mode` (macOS only):
+  #   - SimpleFullscreen
+  #startup_mode: Windowed
+
+  # Window title
+  #title: Alacritty
+
+  # Window class (Linux/BSD only):
+  #class:
+    # Application instance name
+    #instance: Alacritty
+    # General application class
+    #general: Alacritty
+
+  # GTK theme variant (Linux/BSD only)
+  #
+  # Override the variant of the GTK theme. Commonly supported values are `dark` and `light`.
+  # Set this to `None` to use the default theme variant.
+  #gtk_theme_variant: None
 
 scrolling:
   # Maximum number of lines in the scrollback buffer.
@@ -61,30 +85,9 @@ scrolling:
 
   # Number of lines the viewport will move for every line scrolled when
   # scrollback is enabled (history > 0).
-  multiplier: 10
+  #multiplier: 3
 
-  # Faux Scrolling
+# Font configuration
-  #
-  # The `faux_multiplier` setting controls the number of lines the terminal
-  # should scroll when the alternate screen buffer is active. This is used
-  # to allow mouse scrolling for applications like `man`.
-  #
-  # Specifying `0` will disable faux scrolling.
-  faux_multiplier: 10
-
-  # Scroll to the bottom when new text is written to the terminal.
-  auto_scroll: false
-
-# Spaces per Tab (changes require restart)
-#
-# This setting defines the width of a tab in cells.
-#
-# Some applications, like Emacs, rely on knowing about the width of a tab.
-# To prevent unexpected behavior in these applications, it's also required to
-# change the `it` value in terminfo when altering this setting.
-tabspaces: 8
-
-# Font configuration (changes require restart)
 font:
   # Normal (roman) font face
   normal:
@@ -92,50 +95,62 @@ font:
     #
     # Default:
     #   - (macOS) Menlo
-    #   - (Linux) monospace
+    #   - (Linux/BSD) monospace
     #   - (Windows) Consolas
+    #family: monospace
     family: xos4 Terminus
 
     # The `style` can be specified to pick a specific face.
     #style: Regular
 
   # Bold font face
-  bold:
+  #bold:
     # Font family
     #
     # If the bold family is not specified, it will fall back to the
     # value specified for the normal font.
-    family: xos4 Terminus
+    #family: monospace
 
     # The `style` can be specified to pick a specific face.
     #style: Bold
 
   # Italic font face
-  italic:
+  #italic:
     # Font family
     #
     # If the italic family is not specified, it will fall back to the
     # value specified for the normal font.
-    family: xos4 Terminus
+    #family: monospace
 
     # The `style` can be specified to pick a specific face.
     #style: Italic
 
+  # Bold italic font face
+  #bold_italic:
+    # Font family
+    #
+    # If the bold italic family is not specified, it will fall back to the
+    # value specified for the normal font.
+    #family: monospace
+
+    # The `style` can be specified to pick a specific face.
+    #style: Bold Italic
+
   # Point size
   size: 12.0
 
   # Offset is the extra space around each character. `offset.y` can be thought of
   # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
-  offset:
+  #offset:
-    x: 0
+  #  x: 0
-    y: 0
+  #  y: 0
 
   # Glyph offset determines the locations of the glyphs within their cells with
   # the default being at the bottom. Increasing `x` moves the glyph to the right,
   # increasing `y` moves the glyph upwards.
-  glyph_offset:
+  #glyph_offset:
-    x: 0
+  #  x: 0
-    y: 0
+  #  y: 0
 
   # Thin stroke font rendering (macOS only)
   #
@@ -151,39 +166,33 @@ font:
   #
   # This is a global setting and will require a log out or restart to take
   # effect.
-  use_thin_strokes: true
+  #use_thin_strokes: true
-
-# Display the time it takes to redraw each frame.
-render_timer: false
-
-# Keep the log file after quitting Alacritty.
-persistent_logging: false
 
 # If `true`, bold text is drawn using the bright color variants.
-draw_bold_text_with_bright_colors: true
+#draw_bold_text_with_bright_colors: false
 
 # Colors (Tomorrow Night Bright)
-colors:
+#colors:
   # Default colors
-  primary:
+  #primary:
-    background: '0x000000'
+  #  background: '#000000'
-    foreground: '0xeaeaea'
+  #  foreground: '#eaeaea'
 
     # Bright and dim foreground colors
     #
     # The dimmed foreground color is calculated automatically if it is not present.
     # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
     # is `false`, the normal foreground color will be used.
-    #dim_foreground: '0x9a9a9a'
+    #dim_foreground: '#9a9a9a'
-    #bright_foreground: '0xffffff'
+    #bright_foreground: '#ffffff'
 
   # Cursor colors
   #
   # Colors which should be used to draw the terminal cursor. If these are unset,
   # the cursor color will be the inverse of the cell color.
   #cursor:
-  #  text: '0x000000'
+  #  text: '#000000'
-  #  cursor: '0xffffff'
+  #  cursor: '#ffffff'
 
   # Selection colors
   #
@@ -191,44 +200,44 @@ colors:
   # background is unset, selection color will be the inverse of the cell colors.
   # If only text is unset the cell text color will remain the same.
   #selection:
-  #  text: '0xeaeaea'
+  #  text: '#eaeaea'
-  #  background: '0x404040'
+  #  background: '#404040'
 
   # Normal colors
-  normal:
+  #normal:
-    black:   '0x000000'
+  #  black:   '#000000'
-    red:     '0xd54e53'
+  #  red:     '#d54e53'
-    green:   '0xb9ca4a'
+  #  green:   '#b9ca4a'
-    yellow:  '0xe6c547'
+  #  yellow:  '#e6c547'
-    blue:    '0x7aa6da'
+  #  blue:    '#7aa6da'
-    magenta: '0xc397d8'
+  #  magenta: '#c397d8'
-    cyan:    '0x70c0ba'
+  #  cyan:    '#70c0ba'
-    white:   '0xeaeaea'
+  #  white:   '#eaeaea'
 
   # Bright colors
-  bright:
+  #bright:
-    black:   '0x666666'
+  #  black:   '#666666'
-    red:     '0xff3334'
+  #  red:     '#ff3334'
-    green:   '0x9ec400'
+  #  green:   '#9ec400'
-    yellow:  '0xe7c547'
+  #  yellow:  '#e7c547'
-    blue:    '0x7aa6da'
+  #  blue:    '#7aa6da'
-    magenta: '0xb77ee0'
+  #  magenta: '#b77ee0'
-    cyan:    '0x54ced6'
+  #  cyan:    '#54ced6'
-    white:   '0xffffff'
+  #  white:   '#ffffff'
 
   # Dim colors
   #
   # If the dim colors are not set, they will be calculated automatically based
   # on the `normal` colors.
   #dim:
-  #  black:   '0x000000'
+  #  black:   '#000000'
-  #  red:     '0x8c3336'
+  #  red:     '#8c3336'
-  #  green:   '0x7a8530'
+  #  green:   '#7a8530'
-  #  yellow:  '0x97822e'
+  #  yellow:  '#97822e'
-  #  blue:    '0x506d8f'
+  #  blue:    '#506d8f'
-  #  magenta: '0x80638e'
+  #  magenta: '#80638e'
-  #  cyan:    '0x497e7a'
+  #  cyan:    '#497e7a'
-  #  white:   '0x9a9a9a'
+  #  white:   '#9a9a9a'
 
   # Indexed Colors
   #
@@ -236,9 +245,9 @@ colors:
   # When these are not set, they're filled with sensible defaults.
   #
   # Example:
-  #   `- { index: 16, color: '0xff00ff' }`
+  #   `- { index: 16, color: '#ff00ff' }`
   #
-  indexed_colors: []
+  #indexed_colors: []
 
 # Visual Bell
 #
@@ -261,48 +270,88 @@ colors:
 #   - Linear
 #
 # Specifying a `duration` of `0` will disable the visual bell.
-visual_bell:
+#visual_bell:
-  animation: EaseOutExpo
+#  animation: EaseOutExpo
-  duration: 0
+#  duration: 0
-  color: '0xffffff'
+#  color: '#ffffff'
 
 # Background opacity
 #
 # Window opacity as a floating point number from `0.0` to `1.0`.
 # The value `0.0` is completely transparent and `1.0` is opaque.
-background_opacity: 1.0
+#background_opacity: 1.0
 
-# Mouse bindings
+#selection:
-#
+  #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t"
-# Available fields:
-#   - mouse
-#   - action
-#   - mods (optional)
-#
-# Values for `mouse`:
-#   - Middle
-#   - Left
-#   - Right
-#   - Numeric identifier such as `5`
-#
-# All available `mods` and `action` values are documented in the key binding
-# section.
-mouse_bindings:
-  - { mouse: Middle, action: PasteSelection }
 
-mouse:
+  # When set to `true`, selected text will be copied to the primary clipboard.
+  #save_to_clipboard: false
+
+# Allow terminal applications to change Alacritty's window title.
+#dynamic_title: true
+
+#cursor:
+  # Cursor style
+  #
+  # Values for `style`:
+  #   - ▇ Block
+  #   - _ Underline
+  #   - | Beam
+  #style: Block
+
+  # If this is `true`, the cursor will be rendered as a hollow box when the
+  # window is not focused.
+  #unfocused_hollow: true
+
+# Live config reload (changes require restart)
+#live_config_reload: true
+
+# Shell
+#
+# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
+# Entries in `shell.args` are passed unmodified as arguments to the shell.
+#
+# Default:
+#   - (macOS) /bin/bash --login
+#   - (Linux/BSD) user login shell
+#   - (Windows) powershell
+#shell:
+#  program: /bin/bash
+#  args:
+#    - --login
+
+# Startup directory
+#
+# Directory the shell is started in. If this is unset, or `None`, the working
+# directory of the parent process will be used.
+#working_directory: None
+
+# WinPTY backend (Windows only)
+#
+# Alacritty defaults to using the newer ConPTY backend if it is available,
+# since it resolves a lot of bugs and is quite a bit faster. If it is not
+# available, the the WinPTY backend will be used instead.
+#
+# Setting this option to `true` makes Alacritty use the legacy WinPTY backend,
+# even if the ConPTY backend is available.
+#winpty_backend: false
+
+# Send ESC (\x1b) before characters when alt is pressed.
+#alt_send_esc: true
+
+#mouse:
   # Click settings
   #
   # The `double_click` and `triple_click` settings control the time
   # alacritty should wait for accepting multiple clicks as one double
   # or triple click.
-  double_click: { threshold: 300 }
+  #double_click: { threshold: 300 }
-  triple_click: { threshold: 300 }
+  #triple_click: { threshold: 300 }
 
   # If this is `true`, the cursor is temporarily hidden when typing.
-  hide_when_typing: false
+  #hide_when_typing: false
 
-  url:
+  #url:
     # URL launcher
     #
     # This program is executed when clicking on a text which is recognized as a URL.
@@ -312,7 +361,7 @@ mouse:
     #
     # Default:
     #   - (macOS) open
-    #   - (Linux) xdg-open
+    #   - (Linux/BSD) xdg-open
     #   - (Windows) explorer
     #launcher:
     #  program: xdg-open
@@ -322,119 +371,74 @@ mouse:
     #
     # These are the modifiers that need to be held down for opening URLs when clicking
     # on them. The available modifiers are documented in the key binding section.
-    modifiers: None
+    #modifiers: None
 
-selection:
+# Mouse bindings
-  semantic_escape_chars: ",│`|:\"' ()[]{}<>"
-
-  # When set to `true`, selected text will be copied to the primary clipboard.
-  save_to_clipboard: false
-
-# Allow terminal applications to change Alacritty's window title.
-dynamic_title: true
-
-cursor:
-  # Cursor style
-  #
-  # Values for `style`:
-  #   - ▇ Block
-  #   - _ Underline
-  #   - | Beam
-  style: Block
-
-  # If this is `true`, the cursor will be rendered as a hollow box when the
-  # window is not focused.
-  unfocused_hollow: true
-
-# Live config reload (changes require restart)
-live_config_reload: true
-
-# Shell
 #
-# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
+# Mouse bindings are specified as a list of objects, much like the key
-# Entries in `shell.args` are passed unmodified as arguments to the shell.
+# bindings further below.
 #
-# Default:
+# To trigger mouse bindings when an application running within Alacritty captures the mouse, the
-#   - (Linux/macOS) /bin/bash --login
+# `Shift` modifier is automatically added as a requirement.
-#   - (Windows) powershell
-#shell:
-#  program: /bin/bash
-#  args:
-#    - --login
-
-# Windows 10 ConPTY backend (Windows only)
 #
-# This will enable better color support and may resolve other issues,
+# Each mouse binding will specify a:
-# however this API and its implementation is still young and so is
-# disabled by default, as stability may not be as good as the winpty
-# backend.
 #
-# Alacritty will fall back to the WinPTY automatically if the ConPTY
+# - `mouse`:
-# backend cannot be initialized.
+#
-enable_experimental_conpty_backend: false
+#   - Middle
-
+#   - Left
-# Send ESC (\x1b) before characters when alt is pressed.
+#   - Right
-alt_send_esc: true
+#   - Numeric identifier such as `5`
+#
+# - `action` (see key bindings)
+#
+# And optionally:
+#
+# - `mods` (see key bindings)
+#mouse_bindings:
+#  - { mouse: Middle, action: PasteSelection }
 
 # Key bindings
 #
-# Key bindings are specified as a list of objects. Each binding will specify a
+# Key bindings are specified as a list of objects. For example, this is the
-# key and modifiers required to trigger it, terminal modes where the binding is
+# default paste binding:
-# applicable, and what should be done when the key binding fires. It can either
-# send a byte sequence to the running application (`chars`), execute a
-# predefined action (`action`) or fork and execute a specified command plus
-# arguments (`command`).
 #
-# Bindings are always filled by default, but will be replaced when a new binding
+# `- { key: V, mods: Control|Shift, action: Paste }`
-# with the same triggers is defined. To unset a default binding, it can be
-# mapped to the `None` action.
 #
-# Example:
+# Each key binding will specify a:
-#   `- { key: V, mods: Control|Shift, action: Paste }`
 #
-# Available fields:
+# - `key`: Identifier of the key pressed
-#   - key
-#   - mods (optional)
-#   - chars | action | command (exactly one required)
-#   - mode (optional)
 #
-# Values for `key`:
+#    - A-Z
-#   - `A` -> `Z`
+#    - F1-F24
-#   - `F1` -> `F12`
+#    - Key0-Key9
-#   - `Key1` -> `Key0`
 #
-#   A full list with available key codes can be found here:
+#    A full list with available key codes can be found here:
-#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
+#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
 #
-#   Instead of using the name of the keys, the `key` field also supports using
+#    Instead of using the name of the keys, the `key` field also supports using
-#   the scancode of the desired key. Scancodes have to be specified as a
+#    the scancode of the desired key. Scancodes have to be specified as a
-#   decimal number.
+#    decimal number. This command will allow you to display the hex scancodes
-#   This command will allow you to display the hex scancodes for certain keys:
+#    for certain keys:
-#     `showkey --scancodes`
 #
-# Values for `mods`:
+#       `showkey --scancodes`.
-#   - Command
-#   - Control
-#   - Super
-#   - Shift
-#   - Alt
 #
-#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
+# Then exactly one of:
-#   Whitespace and capitalization is relevant and must match the example.
 #
-# Values for `chars`:
+# - `chars`: Send a byte sequence to the running application
-#   The `chars` field writes the specified string to the terminal. This makes
-#   it possible to pass escape sequences.
-#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
-#   the command `showkey -a` outside of tmux.
-#   Note that applications use terminfo to map escape sequences back to
-#   keys. It is therefore required to update the terminfo when
-#   changing an escape sequence.
 #
-# Values for `action`:
+#    The `chars` field writes the specified string to the terminal. This makes
+#    it possible to pass escape sequences. To find escape codes for bindings
+#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
+#    of tmux. Note that applications use terminfo to map escape sequences back
+#    to keys. It is therefore required to update the terminfo when changing an
+#    escape sequence.
+#
+# - `action`: Execute a predefined action
+#
+#   - Copy
 #   - Paste
 #   - PasteSelection
-#   - Copy
 #   - IncreaseFontSize
 #   - DecreaseFontSize
 #   - ResetFontSize
@@ -446,25 +450,59 @@ alt_send_esc: true
 #   - ScrollToBottom
 #   - ClearHistory
 #   - Hide
+#   - Minimize
 #   - Quit
-#   - ClearLogNotice
+#   - ToggleFullscreen
 #   - SpawnNewInstance
+#   - ClearLogNotice
+#   - ReceiveChar
 #   - None
 #
-# Values for `command`:
+#   (macOS only):
-#   The `command` field must be a map containing a `program` string and
+#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
-#   an `args` array of command line parameter strings.
 #
-#   Example:
+# - `command`: Fork and execute a specified command plus arguments
-#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
 #
-# Values for `mode`:
+#    The `command` field must be a map containing a `program` string and an
-#   - ~AppCursor
+#    `args` array of command line parameter strings. For example:
-#   - AppCursor
+#       `{ program: "alacritty", args: ["-e", "vttest"] }`
-#   - ~AppKeypad
+#
-#   - AppKeypad
+# And optionally:
-key_bindings:
+#
-  # (Windows/Linux only)
+# - `mods`: Key modifiers to filter binding actions
+#
+#    - Command
+#    - Control
+#    - Option
+#    - Super
+#    - Shift
+#    - Alt
+#
+#    Multiple `mods` can be combined using `|` like this:
+#       `mods: Control|Shift`.
+#    Whitespace and capitalization are relevant and must match the example.
+#
+# - `mode`: Indicate a binding for only specific terminal reported modes
+#
+#    This is mainly used to send applications the correct escape sequences
+#    when in different modes.
+#
+#    - AppCursor
+#    - AppKeypad
+#    - Alt
+#
+#    A `~` operator can be used before a mode to apply the binding whenever
+#    the mode is *not* active, e.g. `~Alt`.
+#
+# Bindings are always filled by default, but will be replaced when a new
+# binding with the same triggers is defined. To unset a default binding, it can
+# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
+# a no-op if you do not wish to receive input characters for that binding.
+#
+# If the same trigger is assigned to multiple actions, all of them are executed
+# at once.
+#key_bindings:
+  # (Windows, Linux, and BSD only)
   #- { key: V,        mods: Control|Shift, action: Paste            }
   #- { key: C,        mods: Control|Shift, action: Copy             }
   #- { key: Insert,   mods: Shift,         action: PasteSelection   }
@@ -474,122 +512,50 @@ key_bindings:
   #- { key: Subtract, mods: Control,       action: DecreaseFontSize }
   #- { key: Minus,    mods: Control,       action: DecreaseFontSize }
 
-  # (macOS only)
+  # (Windows only)
-  #- { key: Key0,   mods: Command, action: ResetFontSize    }
+  #- { key: Return,   mods: Alt,           action: ToggleFullscreen }
-  #- { key: Equals, mods: Command, action: IncreaseFontSize }
-  #- { key: Add,    mods: Command, action: IncreaseFontSize }
-  #- { key: Minus,  mods: Command, action: DecreaseFontSize }
-  #- { key: K,      mods: Command, action: ClearHistory     }
-  #- { key: K,      mods: Command, chars: "\x0c"            }
-  #- { key: V,      mods: Command, action: Paste            }
-  #- { key: C,      mods: Command, action: Copy             }
-  #- { key: H,      mods: Command, action: Hide             }
-  #- { key: Q,      mods: Command, action: Quit             }
-  #- { key: W,      mods: Command, action: Quit             }
 
-  - { key: Paste,                   action: Paste                            }
+  # (macOS only)
-  - { key: Copy,                    action: Copy                             }
+  #- { key: Key0,   mods: Command,         action: ResetFontSize    }
-  - { key: L,        mods: Control, action: ClearLogNotice                   }
+  #- { key: Equals, mods: Command,         action: IncreaseFontSize }
-  - { key: L,        mods: Control, chars: "\x0c"                            }
+  #- { key: Add,    mods: Command,         action: IncreaseFontSize }
-  - { key: Home,     mods: Alt,     chars: "\x1b[1;3H"                       }
+  #- { key: Minus,  mods: Command,         action: DecreaseFontSize }
-  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
+  #- { key: K,      mods: Command,         action: ClearHistory     }
-  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
+  #- { key: K,      mods: Command,         chars: "\x0c"            }
-  - { key: End,      mods: Alt,     chars: "\x1b[1;3F"                       }
+  #- { key: V,      mods: Command,         action: Paste            }
-  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
+  #- { key: C,      mods: Command,         action: Copy             }
-  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
+  #- { key: H,      mods: Command,         action: Hide             }
-  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
+  #- { key: M,      mods: Command,         action: Minimize         }
-  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
+  #- { key: Q,      mods: Command,         action: Quit             }
-  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
+  #- { key: W,      mods: Command,         action: Quit             }
-  - { key: PageUp,   mods: Alt,     chars: "\x1b[5;3~"                       }
+  #- { key: F,      mods: Command|Control, action: ToggleFullscreen }
-  - { key: PageUp,                  chars: "\x1b[5~"                         }
+
-  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
+  #- { key: Paste,                    action: Paste                            }
-  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
+  #- { key: Copy,                     action: Copy                             }
-  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
+  #- { key: L,         mods: Control, action: ClearLogNotice                   }
-  - { key: PageDown, mods: Alt,     chars: "\x1b[6;3~"                       }
+  #- { key: L,         mods: Control, chars: "\x0c"                            }
-  - { key: PageDown,                chars: "\x1b[6~"                         }
+  #- { key: PageUp,    mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
-  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
+  #- { key: PageDown,  mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
-  - { key: Back,                    chars: "\x7f"                            }
+  #- { key: Home,      mods: Shift,   action: ScrollToTop,    mode: ~Alt       }
-  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
+  #- { key: End,       mods: Shift,   action: ScrollToBottom, mode: ~Alt       }
-  - { key: Insert,                  chars: "\x1b[2~"                         }
+
-  - { key: Delete,                  chars: "\x1b[3~"                         }
+#debug:
-  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
+  # Display the time it takes to redraw each frame.
-  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
+  #render_timer: false
-  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
+
-  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
+  # Keep the log file after quitting Alacritty.
-  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
+  #persistent_logging: false
-  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
+
-  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
+  # Log level
-  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
+  #
-  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
+  # Values for `log_level`:
-  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
+  #   - None
-  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
+  #   - Error
-  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
+  #   - Warn
-  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
+  #   - Info
-  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
+  #   - Debug
-  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
+  #   - Trace
-  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
+  #log_level: Warn
-  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
+
-  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
+  # Print all received window events.
-  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
+  #print_events: false
-  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
-  - { key: F1,                      chars: "\x1bOP"                          }
-  - { key: F2,                      chars: "\x1bOQ"                          }
-  - { key: F3,                      chars: "\x1bOR"                          }
-  - { key: F4,                      chars: "\x1bOS"                          }
-  - { key: F5,                      chars: "\x1b[15~"                        }
-  - { key: F6,                      chars: "\x1b[17~"                        }
-  - { key: F7,                      chars: "\x1b[18~"                        }
-  - { key: F8,                      chars: "\x1b[19~"                        }
-  - { key: F9,                      chars: "\x1b[20~"                        }
-  - { key: F10,                     chars: "\x1b[21~"                        }
-  - { key: F11,                     chars: "\x1b[23~"                        }
-  - { key: F12,                     chars: "\x1b[24~"                        }
-  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
-  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
-  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
-  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
-  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
-  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
-  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
-  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
-  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
-  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
-  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
-  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
-  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
-  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
-  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
-  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
-  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
-  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
-  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
-  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
-  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
-  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
-  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
-  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
-  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
-  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
-  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
-  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
-  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
-  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
-  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
-  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
-  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
-  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
-  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
-  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
-  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
-  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
-  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
-  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
-  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
-  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
-  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
-  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
-  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
-  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
-  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
-  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
-  - { key: NumpadEnter,             chars: "\n"                              }