834 B
834 B
Arduino Mega RFID-RC522 wiring
Introduction
NB! RFID-RC522 requires only 3.3 V DC input voltage. Never connect it to 5V input.
Wiring illustration
Wiring table
| Signal | ATMega2560 port and pin | Arduino Mega 2560 pin | 5V to 3V converter | RFID-RC522 | Wire colour in illustration |
|---|---|---|---|---|---|
| Slave select | PORTB 0 | 53 | - | SDA | White |
| SPI clock | PORTB 1 | 52 | - | SCK | Orange |
| Master out slave in | PORTB 2 | 51 | - | MOSI | Green |
| Master in slave out | PORTB 3 | 50 | - | MISO | Yellow |
| RF522 reset | PORTL 0 | 49 | - | RST | Brown |
| Ground | GND | GND | GND | GND | Black |
| 5 V DC | - | 5V | VIN | - | Red |
| 3,3 V DC | - | - | VOUT | 3.3 V | Red |