#pmieconf-rules 1
# --- DO NOT MODIFY THIS FILE --- see pmieconf(4)
# $Id: some_util,v 1.1 1999/04/28 10:39:51 kenmcd Exp $
#

rule	per_cpu.some_util
	summary	= "$rule$"
	enumerate = hosts
	predicate =
"some_inst (
  ( 100 * ( kernel.percpu.cpu.user $hosts$ +
	    kernel.percpu.cpu.sys $hosts$ +
	    kernel.percpu.cpu.intr $hosts$ ) )
	> $threshold$
    && hinv.ncpu $hosts$ > 1
    && hinv.ncpu $hosts$ <= $max_cpu_count$
)"
	enabled	= yes
	version	= 1
	help	=
"The processor utilization for at least one CPU exceeded threshold
percent during the last sample interval.  Only applies to
multi-processor systems with less than max_cpu_count processors -
for single-processor systems refer to the cpu.util rule, and for
multi-processor systems with more than max_cpu_count processors
refer to the cpu.many_util rule.
For Origin 200 and Origin 2000 systems, use the command
  $ pminfo -f hinv.map.cpu
to discover the abbreviated PCP names of the installed CPUs and
their corresponding full names in the /hw file system.";

string	rule
	default	= "High per CPU processor utilization"
	modify	= no
	display	= no;

percent	threshold
	default	= 95
	help	=
"Threshold percentage for CPU saturation, in the range 0 (idle)
to 100 (completely busy)";

unsigned	max_cpu_count
	default	= 4
	help	=
"Upper limit on number of processors for this rule - this rule will
apply to configurations of between two and max_cpu_count CPUs.
For larger processor counts, the per_cpu.many_util rule may be more
appropriate.";

string	action_expand
	default	= %v%util[%i]@%h
	display	= no
	modify	= no;

string	email_expand
	default	= "host: %h CPU: %i utilization: %v%"
	display	= no
	modify	= no;


# Configuration info specific to non-PCP tools follows...
# 

# for SGI Embedded Support Partner integration:
string	esp_type
	default	= "0x200059"
	display	= no
	modify	= no;

# 
# --- DO NOT MODIFY THIS FILE --- see pmieconf(4)
