
		IP21 POD COMMANDS

     In TFP system, help menu in POD command list as:
 
     POD xx/yy> help
     Write byte:       wb ADDRESS NUMBER
     Write halfword:   wh ADDRESS NUMBER
     Write word:       ww ADDRESS NUMBER
     Write double:     wd ADDRESS NUMBER
     Display byte:     db ADDRESS
     Display halfword: dh ADDRESS
     Display word:     dw ADDRESS
     Display double:   dd ADDRESS
     Display niblet master debug buffer:   dm NUMBER
     Display niblet slave debug buffer:   ds NUMBER
     Display register: dr <sr || sp || all>
     Write register:   wr < sr >
     'scope loop:      sloop (COMMAND)
     Finite loop:      loop TIMES (COMMAND)
     Slot contents:    info
     Mem diagnostic:   mem LOADDR HIADDR
     Jump to address:  j ADDRESS
     Jump to address:  j1 ADDRESS PARAM1
     Jump to address:  j2 ADDRESS PARAM1 PARAM2
     Disp. config reg: dc SLOT REGNUM
     Write config reg: wc SLOT REGNUM VALUE
     Disp mem bd regs: dmc SLOT
     Disp io brd regs: dio SLOT
     Reset the system: reset
     Run Niblet:       niblet <0 - 9>
     Send interrupt:   si SLOT CPU LnEVEL
     Clear TLB:        flusht
     Dump TLB:         td <index | all>
     Clear State:      clear
     Decode Address:   decode PHYSADDR
     Walk a bit:       walk <loaddr> <hiaddr> <cont on fails>
     Dump dcache tag:  dtag addr
     Dump scache tag:  stag PHYSADDR
     Dump scache tags: staga state_mask
     Dump dcache tags: dtaga state_mask
     Goto slave mode:  slave
     Set Page Size:    setpg PAGESIZE
     Show Page Size:   showpg
     Download IO PROM: io
     Why are we here?: why
     Disable unit:     disable SLOT UNIT
     Enable unit:      enable SLOT UNIT
     Force disable:    fdisable SLOT UNIT
     Force enable:     fenable SLOT UNIT
     Display config:   devc SLOT | all
     Reinit inventory: zap
     Display MPCONF:   dmpc VPID
     Fix EAROM cksum:  fixcksum
     Show EAROM cksum: cksum
     G-cache Parity:   gparity LOADDR HIADDR

	
     POD COMMANDS DESCRIPTION
     ========================

     wb - write byte to address
     wh - write halfword to address
     ww - write word to address
     wd - write double word to address
     db - display byte content from address
     dh - display halfword content from address
     dw - display word from address
     dd - display double word content from address
     dm - display niblet master debug buffer
     ds - display niblet slave debug buffer
     dr - display status register or stack pointer or all registers
     wr - write to status register
     sloop - scope loop command 
     loop - loop command certain times
     info - display slot contents
     mem - memory test on some address range
     j - jump to address
     j1  - jump to address with one parameter
     j2  - jump to address with two parameters
     dc  - display slot xx register yy
     wc  - write slot xx register yy
     dmc - display memory slot info
     dio - display io slot info
     reset - reset system
     niblet - run niblet test
     si - send interrupt 
     flusht - flush TLB
     td  - dump TLB
     clear - clear state  
     decode - decode physical address
     walk - memory walk test
     dtag - dump dcache tag
     stag  - dump scache tag
     staga - dump scache tags
     dtaga - dump dcache tags
     slave -  go to slave mode
     setpg - set page size
     showpg - show page size
     io - download IO prom 
     why - why are we here?
     disable - disable slot xx proc yy
     enable - enable slot xx proc yy
     fdisable - force disable slot xx proc yy
     fenable - force enable slot xx proc yy
     devc - display one or All slot information
     zap - reinit inventory
     dmpc - display MPCONF
     fixcksum - fix EAROM checksum
     cksum - show EAROM checksum
     gparity - perform gcache parity cache on some address range
