#
# cpu_diagcmds - IP26 CPU Diagnostic functions
#
# First column is the name
# Second column is the type:
#   STR for string
#   CMD for command
#   INT for integer constant
# Third column is value:
#   CMD value is the name of the function to call
#   STR value is the quoted string
#   INT value is the integer
# 
# Columns must be separated by exactly one TAB!
audiofield	CMD	audiofield	run field audio test
.blk	CMD	blk_test	Block Read and Write Test
.buffoff	CMD	buffoff	Turn off message buffering
.buffon	CMD	buffon	Turn on message buffering
clock	CMD	rt_clock	clock counters carry
dcache	CMD	dcache	Dcache test (usage: dcache)
.dram	CMD	dram_diagnostics	[RANGE] DRAM (>4MB) data/address test
duart	CMD	duart_loopback	(-i|e)(0-1) DUART internal/external loopback
ecc	CMD	ecc_test	ECC tests
eisa	CMD	eisa_register	data path test for EIU/Intel regs.
emfail	CMD	emfail	Produce \"Electronics Module\" failure message
fast_iu	CMD	pass_fast_iu_test	fast iu tests
fpu	CMD	fptest	Floating Point Unit test
help_mem	CMD	print_memory_diagram	Print memory diagram
hinv	CMD	hinv	Hardware Inventory
hpc3	CMD	hpc3	HPC3 registers and fifos
int2	CMD	int2_mask	int2 interrupt mask registers
.ldram	CMD	low_memtest	DRAM (0-16MB) data/address test
lkh_aa	CMD	khlow_drv	KH + AA test run in the area usually occupied by ide
.lpackd	CMD	lpackd	lpackd tests
.memtest	CMD	memtest2_test	CPU memory test
memtest2	CMD	memtest2_test	CPU memory test
nvram5	CMD	eeprom_pins	eeprom pin signals
pwjumper	CMD	passwd_jumper	Indicate if passwd jumper is installed
resetcons	CMD	resetcons	Reset graphics console
scache	CMD	scache	Scache tests (usage: scache [1-6])
scsi	CMD	scsi	SCSI
.shift	CMD	shift_dram	Shifting data patterns into successive addresses
tccfifo	CMD	tcc_fifo_test	TCC FIFO test
tccpref	CMD	tcc_pref_test	TCC Prefetch test
timer	CMD	timer	timer frequency
.tlb	CMD	tlbtest
.utlb	CMD	utlb_miss_exception
wait	CMD	wait	Wait for <CR> to continue (usage: wait [\"message\"])
xscsi	CMD	exercise_scsi	Exercise all SCSI disk drives found
