# This is an ide startup file.
report=4 # set verbose, but not debug
$stoponerr=1
#hinv -v

mgv_menu {
echo ""
echo "=================== IMPACT VIDEO IDE COMMANDS ======================"
echo "mg_setboard(0)      mg_reset           mgv_init          mgv_galregl1"
echo "mgv_abdcb           mgv_abaddrbus      mgv_abdatabus     mgv_abpatrn"
echo "mgv_ccdcb           mgv_ccaddrbus      mgv_ccdatabus     mgv_ccpatrn"
echo "mgv_vgiregpatrn     mgv_vgiregwalk     mgv_vgiint        mgv_vgidma"
echo "mgv_voutl0          mgv_voutl1         mgv_vgivoutl0"
echo "mgv_extvin          mgv_vinl1"
echo "mgv_cctovgi         mgv_cctovgix       mgv_readcc        mgv_gpitrig"
echo "===================================================================="
echo "mgv_initall         mgv_aball          mgv_ccall"
echo "mgv_vgiregall       mgv_vgiintall      mgv_vgidmaall     mgv_vgiall"
echo "mgv_voutall         mgv_vinall         mgv_loopbackall"
echo "mgv_all"
echo "=================================================="
echo "*******  USE mgv_all to run all of them  *********"
echo "=================================================="
echo ""
}

mgv_initall {
	$failed = 0;
	echo ""
	buffon;
	mg_setboard 0;
	mg_reset;
	resetcons;
	buffoff;
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
}

mgv_aball {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test AB and DRAM"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_abdcb;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_abaddrbus -r -g -b -a
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_abdatabus -r -g -b -a
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_abpatrn -r -g -b -a
	if ($status) {
		$failed = 1;
		return($status);
	}

#	$status = mgv_abpatrnslow -r -g -b -a
	if ($status) {
		$failed = 1;
		return($status);
	}
}

mgv_ccall {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test CC and Frame Buffer"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_ccdcb;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_ccaddrbus 
	if ($status) {
		$failed = 1;
		return(1);
	}

	$status = mgv_ccdatabus
	if ($status) {
		$failed = 1;
		return($status);
	}
}

mgv_vgiregall {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test VGI registers"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiregpatrn
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiregwalk
	if ($status) {
		$failed = 1;
		return($status);
	}
}

mgv_vgiintall {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test VGI Interrupts"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiint -i 0x1;
	if ($status) {
		$failed = 1;
		return($status);
	}

#	$status = mgv_vgiint -i 0x2;
#	if ($status) {
#		$failed = 1;
#		return($status);
#	}

	$status = mgv_vgiint -i 0x4;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiint -i 0x8;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiint -i 0x10;
	if ($status) {
		$failed = 1;
		return($status);
	}

#	$status = mgv_vgiint -i 0x20;
#	if ($status) {
#		$failed = 1;
#		return($status);
#	}

	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiint -c 2 -i 0x1;
	if ($status) {
		$failed = 1;
		return($status);
	}

#	$status = mgv_vgiint -c 2 -i 0x2;
#	if ($status) {
#		$failed = 1;
#		return($status);
#	}

	$status = mgv_vgiint -c 2 -i 0x4;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiint -c 2 -i 0x8;
	if ($status) {
		$failed = 1;
		return($status);
	}

	$status = mgv_vgiint -c 2 -i 0x10;
	if ($status) {
		$failed = 1;
		return($status);
	}

#	$status = mgv_vgiint -c 2 -i 0x20;
#	if ($status) {
#		$failed = 1;
#		return($status);
#	}
}

mgv_vgidmaall {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test VGI DMA's"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -t 1 -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -v 1 -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -v 2 -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

#	$status = mgv_vgidma -o 1 -v 3 -z 50; 
#	if ($status) {
#		return($status);
#	}

	ide_delay -s 2;

	$status = mgv_vgidma -v 4 -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -t 1 -v 5 -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -t 1 -v 5 -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -t 1 -v 6 -y 0x40404040  -z 50; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_initall;
	if ($failed) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -t 1; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -v 1; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -v 2; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

#	$status = mgv_vgidma -c 2 -o 1 -v 3; 
#	if ($status) {
#		return($status);
#	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -v 4; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -t 1 -v 5; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -t 1 -v 5; 
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -s 2;

	$status = mgv_vgidma -c 2 -t 1 -v 6 -y 0x40404040 ; 
	if ($status) {
		$failed = 1;
		return($status);
	}

}

mgv_vgiall {
	$failed = 0;
	$status = mgv_vgiregall;
	if ($failed) {
		return($status);
	}
	$status = mgv_vgiintall;
	if ($failed) {
		$failed = 1;
		return($status);
	}
	$status = mgv_vgidmaall;
	if ($failed) {
		$failed = 1;
		return($status);
	}
}


mgv_voutall {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test Video Output"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	echo ""
	echo "******** Please select Channel A on the WFM 601i ********"
	echo "Press <Space> when ready"
	$status = mgv_waitforspace -s 86400
	echo ""
	echo "Confirm patterns on Channel 1 Video Monitor"
	$status = mgv_voutl0 1;
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -ms 10000 ;

	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	echo ""
	$status = mgv_vgivoutl0;
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -ms 10000 ;

	echo ""
	echo "******** Please select Channel B on the WFM 601i ********"
	echo "Press <Space> when ready"
	$status = mgv_waitforspace -s 86400
	echo ""
	echo "Confirm patterns on Channel 2 Video Monitor"
	$status = mgv_voutl0 2;
	if ($status) {
		$failed = 1;
		return($status);
	}

	ide_delay -ms 10000 ;

	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}

	echo ""
	$status = mgv_vgivoutl0 2;
	if ($status) {
		$failed = 1;
		return($status);
	}

}

mgv_vinall {
	$failed = 0;
	echo ""
	echo "=====Initialize & Test Video input"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	echo "Video Input Tests for Channel 1"
	$status = mgv_extvin;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	echo "Video Input Tests for Channel 2"
	$status = mgv_extvin 2;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	$status = mgv_vinl1;
	if ($status) {
		$failed = 1;
		return($status);
	}
}

mgv_loopbackall {
	$failed = 0;
	echo "=====Initialize & Test Loop Back"
	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	echo ""
	echo "******** Please select the Loop Back switch on the IDE switch box ********"
	echo "Press <Space> when ready"
	$status = mgv_waitforspace -s 86400
	if ($status) {
		echo ""
		echo "CC1 to VGI1 Loop Back Test Timed Out"
		echo ""
	} else {
		echo ""
		echo "CC1 to VGI1 Loop Back Test for Channel 1"
		echo ""
		$status = mgv_cctovgi 1;
		if ($status) {
			$failed = 1;
			return($status);
		}
	}

	$status = mgv_init;
	if ($status) {
		$failed = 1;
		return($status);
	}
	echo "CC1 to VGI1 Loop Back Test for Channel 2"
	$status = mgv_cctovgi 2;
	if ($status) {
		$failed = 1;
		return($status);
	}
}

mgv_csc_all	{
        mgv_initall;	
	echo "Verifying  whether the CSC/TMI optional board is present ..." 
	$failed = 0;
	$status = mgv_csc_probe ;
	if ($status)	{
		echo "CSC/TMI optional board is NOT present"
		return 0;
	}
	else {
		echo "Running CSC diagnostics ...."

		$status = mgv_csc_bus -b 0 -t 0 ;

		if ($status) {
			echo "CSC Address Bus test failed"
			$failed = 1;
			return ($status);
		}
		else {
			echo "CSC Address Bus test passed"
		}

		$status = mgv_csc_bus -b 1 -t 3 ;
		
		if ($status) {
			echo "CSC Data Bus test failed"
			$failed = 1;
			return($status);
		}
		else {
			echo "CSC Data Bus test passed"
		}

		$status = mgv_csc_outlut ;

		if ($status) {
			echo "CSC Output LUTS test failed"
			$failed = 1;
			return($status);
		}
		else {
			echo "CSC Output LUTS test passed"
		}

		$status = mgv_csc_coef ;

		if ($status) {
			echo "CSC Coefficient test failed"
			$failed = 1;
			return ($status);
		}
		else {
			echo "CSC Coefficient test passed"
		}

		return $status ;
	}
}

unix {
        echo "<<<< About to to boot UNIX......>>>>"
        boot dksc(0,1,0)unix;
     }

mgv_all {
	$status = 0;
	$failed = 0;
	echo ""
	echo "Impact Video IDE Test Suite"
	echo ""

############### Initialize & Test All Loop Back
	$status = mgv_loopbackall;
	if ($failed) {
		return(-1);
	}

############### Test GPI Trigger
	echo "GPI Trigger Polarity Test"
	echo "Please set the GPI trigger switch to the OFF position"
	echo "Press <Space> when ready"
	$status = mgv_waitforspace -s 86400
	if ($status) {
		echo ""
		echo "GPI Trigger Polarity Test Timed Out"
		echo ""
	} else {
		$status = mgv_gpitrig -p 0;
		if ($status) {
			return(-1);
		}
		$status = mgv_gpitrig -p 1;
		if ($status) {
			return(-1);
		}
        }

        echo; echo; echo;
        echo "Please select the TSG422 switch on the IDE switch box"
        echo "Press <Space> when ready"
        $status = mgv_waitforspace -s 86400
        if ($status) {
                 echo ""
                 echo "Test timed out after waiting an hour!"
                 return(-1)
        }

        echo; echo; echo;
############### Initialize & Test GALILEO 1.5 Register Access
	echo ""
	echo "=====Initialize & Test GALILEO 1.5 Register Access"
	$status = mgv_initall;
	if ($failed) {
		return($status);
	}
	$status = mgv_galregl1;
	if ($failed) {
		return($status);
	}

############### Initialize & Test CC and Frame Buffer
	$status = mgv_ccall;
	if ($failed) {
		return($status);
	}

############### Initialize & Test AB and DRAM
	$status = mgv_aball;
	if ($failed) {
		return($status);
	}

############### Initialize & Test VGI registers
	$status = mgv_vgiregall;
	if ($failed) {
		return($status);
	}

############### Initialize & Test VGI Interrupts
	$status = mgv_vgiintall;
	if ($failed) {
		return($status);
	}

############### Initialize & Test Video Output
	$status = mgv_voutall;
	if ($failed) {
		return($status);
	}

############### Initialize & Test Video input
#	$status = mgv_vinall;
#	if ($failed) {
#		return($status);
#	}

############### Initialize & Test VGI DMA's
	$status = mgv_vgidmaall;
	if ($failed) {
		return($status);
	}

############### Initialize & Test CSC
	$status = mgv_csc_all;
	if ($failed) {
		return($status);
	}

############### Initialize & Exit
	echo ""
	echo "=====Initialize & Exit"
	$status = mgv_init;
	if ($status) {
		return($status);
	}
	echo ""
	echo "Impact Video IDE Test Suite Completed"
        unix
}

$status = 0;
mgv_menu