# This is an ide startup file.
#
report=4 # set verbose, but not debug
$stoponerr=1
$runin=0
$func=0
$do_cpu=0
$failed=0
$report_pass=0  # Report pass condition in runin
$status=0
$test_name=""

is_R10k {
	$processor = find_cpu
	if ( $processor == 2 )
		return (1);
	else
		return (0);
}
is_R5k {
	$processor = find_cpu
	if ( $processor == 1 )
		return (1);
	else
		return (0);
}
is_R12k {
	$processor = find_cpu
	if ( $processor == 3 )
		return (1);
	else
		return (0);
}
menu {

	echo ""
	echo "Ide included scripts are:"
	echo "    cpu		Do all cpu module related tests."
	echo "    ip32		Do all ip32 related tests."
	echo "    memory	Do all memory tests."
	echo "    s_cache	Do only secondary cache tests."
	echo "    graphics	Do only graphics tests."
	echo ""

}

# Check test status then do bootp to send message if in runin

Do_Bootp {
	boot -n -f $1
}

Chk_For_Error {
	if ($status) {
		$failed = 1;
		echo $test_name "FAILED"
		if ($runin) {
			$tmp = "bootp()" + $test_name + ".fail"
			Do_Bootp $tmp
		}
		if ($stoponerr) {
			wait
		}
	}
	else {
		if ($runin && $report_pass) {
			$tmp = "bootp()" + $test_name + ".pass"
			Do_Bootp $tmp
		}
	}
}

# Test memory
memory {
	$report_pass = 0
	$failed = 0
        echo "** Start memtest3 Test **"
	$test_name = "memtest3"
	$status = memtest3;
	Chk_For_Error

        echo "** Start memtest3_1 Test **"
	$test_name = "memtest3_1"
	$status = memtest3 1;
	Chk_For_Error

        echo "** Start memtest Test **"
	$test_name = "memtest"
	$status = memtest;
	Chk_For_Error
	
#	$report_pass = 0
#        echo "** Start memtest2 0 Test **"
#	$test_name = "memtest2_0"
#	$status = memtest2 0;
#	Chk_For_Error

        echo "** Start memtest2 1 Test **"
	date
	$test_name = "memtest2_1"
	$status = memtest2 1;
	Chk_For_Error

#        echo "** Start memtest2 2 Test **"
#	date
#	$test_name = "memtest2_2"
#	$status = memtest2 2;
#	Chk_For_Error

#        echo "** Start memtest2 3 Test **"
#	date
#	$test_name = "memtest2_3"
#	$status = memtest2 3;
#	Chk_For_Error

#        echo "** Start memtest2 5 Test **"
#	date
#	$test_name = "memtest2_5"
#	$status = memtest2 5;
#	Chk_For_Error

#        echo "** Start memtest2 8 Test **"
#	date
#	$test_name = "memtest2_8"
#	$status = memtest2 8;
#	Chk_For_Error

#        echo "** Start memtest2 9 Test **"
#	date
#	$test_name = "memtest2_9"
#	$status = memtest2 9;
#	Chk_For_Error

#        echo "** Start memtest2 10 Test **"
#	date
#	$test_name = "memtest2_10"
#	$status = memtest2 10;
#	Chk_For_Error

#        echo "** Start memtest2 12 Test **"
#	date
#	$test_name = "memtest2_12"
#	$status = memtest2 12;
#	Chk_For_Error

#	$report_pass = 0
#        echo "** Start memtest2 13 Test **"
#	date
#	$test_name = "memtest2_13"
#	$status = memtest2 13;
#	Chk_For_Error

	date

	if ($failed) {
		echo "\n#### Memory Test FAILED ####"
	}
	else {
		echo "\n#### Memory Test PASSED ####"
	}
}

#
# Do cpu related tests
#
cpu {

	$report_pass = 0
	$failed = 0
	date
# TLB test. Verify different tlb functions.
        echo "** Start tlb Test ** "
	$test_name = "tlb"
	$status = tlb
	Chk_For_Error

# UTLB miss exception test. Verify the exception generating capability of the
# mips chip during a utlb miss.
#if ((utlb) && $stoponerr)

#	$report_pass = 1
        echo "** Start fpu Test **"
	date
	$test_name = "fpu"
	$status = fpu;
	Chk_For_Error
	$report_pass = 0

        echo "** Start dcache1 Test **"
	$test_name = "dcache1"
	$status = dcache1;
	Chk_For_Error

        echo "** Start icache1 Test **"
	$test_name = "icache1"
	$status = icache1;
	Chk_For_Error

        echo "** Start icache2 Test **"
	$test_name = "icache2"
	$status = icache2;
	Chk_For_Error

#	$report_pass = 1
	if ( is_R5k || $runin ) {
		date
        	echo "** Start scache2 Test **"
		$test_name = "scache2"
		$status = scache2;
		Chk_For_Error
	}

       	echo "** Start scache3 Test **"
	date
	$test_name = "scache3"
	$status = scache3;
	Chk_For_Error

#	if ( $runin ) {
	       	echo "** Start scache4 Test **"
		date
		$test_name = "scache4"
		$status = scache4;
		Chk_For_Error
#	}

        echo "** Start scache6 Test **"
	date
	$test_name = "scache6"
	$status = scache6;
	Chk_For_Error

	if ($failed) {
		echo "#### IP32 - CPU Test FAILED ####"
	}
	else {
		echo "#### IP32 - CPU Test PASSED ####"
	}
} # End of cpu script

ip32 {

	$failed = 0
	$report_pass = 0

        echo "** Start cntrs Test **"
	$test_name = "cntrs"
	$status = cntrs
	Chk_For_Error

        echo "** Start RTC Register Test **"
	$test_name = "rtcreg"
	$status = rtcreg
	Chk_For_Error

        echo "** Start RTC Test **"
	$test_name = "clock"
	$status = clock
	Chk_For_Error

        echo "** Start NIC Test **"
	$test_name = "NIC"
	$status = check_nic
	Chk_For_Error

#        echo "** Start i2c_reg Test **"
#	$test_name = "i2c_reg"
#	$status = i2c_reg;
#	Chk_For_Error

        echo "** Start PCI Test **"
	$test_name = "pci"
	$status = pci;
	Chk_For_Error

        echo "** Start maceec - Mace Ethernet Test **"
	$test_name = "maceec"
	$status = maceec;
	Chk_For_Error

        echo "** Start plpreg Test **"
	$test_name = "plpreg"
	$status = plpreg;
	Chk_For_Error

        echo "** Start plploop Test **"
	$test_name = "plploop"
	$status = plploop;
	Chk_For_Error
#
#  If we are in functional test then do plp ext loopback test
#
	if ($func) {
        	echo "** Start plp_ext_loop Test **"
		$test_name = "plp_ext_loop"
		$status = plp_ext_loop;
		Chk_For_Error

	}
	if ($runin) {
		echo "** SKIPPING SERIAL LOOP TEST FOR RUNIN **"
	}
	else {
        	echo "** Start serialloop Test **"
		$test_name = "serialloop"
		$status = serialloop;
		Chk_For_Error
	}

        echo "** Start scsi Test **"
	$test_name = "scsi"
	$status = scsi;
	Chk_For_Error

#	$report_pass = 0
#        echo "** Start memtest - 1MB - Test **"
#	$test_name = "memtest1MB"
#	$status = memtest 0xa1000000:0xa1100000
#	Chk_For_Error

	date

	if ($failed) {
		echo "#### IP32 Test FAILED ####"
	}
	else {
		echo "#### IP32 Test PASSED ####"
	}
}

s_cache {
	$scachefail = 0
        echo "** Start scache2 Test **"
        date
        $status = scache2;
        if ($status) {
		$scachefail = 1;
                wait;
        }
        echo "** Start scache3 Test **"
        $status = scache3;
        if ($status) {
                $scachefail = 1;
                wait;
        }
        echo "** Start scache4 Test **"
        $status = scache4;
        if ($status) {
                $scachefail = 1;
                wait;
        }

        echo "** Start scache6 Test **"
        $status = scache6;
        if ($status) {
		$scachefail = 1;
                wait;
        }

	if ($scachefail) 
		echo "\n#### s_cache Tests FAILED"
	else
		echo "\n#### s_cache Tests PASSED"

}

#
# Setup the environment to boot unix then DOIT
#
boot_unix {
	echo "Booting UNIX. . ."
	if ( $runin )
		boot -n -f bootp()start_unix
	setenv SystemPartition pci(0)scsi(0)disk(1)rdisk(0)partition(8)
	setenv OSLoader sash
	setenv AutoLoad Yes
	mfg_reboot
}

graphics {

	$failed = 0

	$report_pass = 0
	echo "** Start GFX Reg Test **"
	$test_name = "gfx_reg"
	runcached on
        $status = gfx_reg_test;
	Chk_For_Error

	$report_pass = 0
	echo "** Start GFX qnd Test **"
	$test_name = "qnd_gfx"
	runcached on
        $status = qnd_gfx_test;
	Chk_For_Error
	
	runcached off
	if ( $failed ) 
		echo "#### Graphics Test FAILED ####"
	else
		echo "#### Graphics Test PASSED ####"
}
start_ide {
    if ( $PROGRAM_NAME == "cpu32.ide" || $PROGRAM_NAME == "bootp()/usr/local/boot/cpu32.ide" || $PROGRAM_NAME == "bootp()cpu32.ide" ) {
	$do_cpu=1
	echo "#### Start Cpu32 Script ####"
        hinv -v
        msglog_start
        cpu
        msglog_stop
	boot_unix
    }
    if ( $PROGRAM_NAME == "ip32.ide" || $PROGRAM_NAME == "bootp()/usr/local/boot/ip32.ide" || $PROGRAM_NAME == "bootp()ip32.ide" ) {
	echo "#### Start IP32 Script ####"
        hinv -v
        msglog_start
	cpu
        ip32
        msglog_stop
    }
    if ( $PROGRAM_NAME == "func32.ide" || $PROGRAM_NAME == "bootp()/usr/local/boot/func32.ide" || $PROGRAM_NAME == "bootp()func32.ide" ) {
	$func = 1
	echo "#### Start Func32 Script ####"
        hinv -v
        msglog_start
#	cpu
	ip32
	msglog_stop
	graphics
	boot_unix
    }
    if ( $PROGRAM_NAME == "runin32.ide" || $PROGRAM_NAME == "bootp()/usr/local/boot/runin32.ide" || $PROGRAM_NAME == "bootp()runin32.ide" ) {
	echo "#### Start Runin32 Script ####"
	$runin = 1
	hinv -v
	msglog_start
	cpu
	ip32
	msglog_stop
	graphics
	msglog_start
	memory
	msglog_stop
	boot_unix
    }
    menu;
}

if ( is_R5k )
	echo "Running on an R5k Processor"
else {
	if ( is_R10k )
		echo "Running on an R10k Processor"
	else {
		if ( is_R12k )
			echo "Running on an R12k Processor"
		else 
			echo "Running on an Unknown Processor"
	}
}
	
	
start_ide;