lora-car/libopencm3/lib/nrf/common/gpio.c

209 lines
5.5 KiB
C
Raw Normal View History

/** @addtogroup gpio_file GPIO peripheral API
*
* @brief <b>Access functions for the I/O Controller</b>
*
* @ingroup peripheral_apis
* LGPL License Terms @ref lgpl_license
* @author @htmlonly &copy; @endhtmlonly 2016
* Maxim Sloyko <maxims@google.com>
*
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2017-2018 Unicore MX project<dev(at)lists(dot)unicore-mx(dot)org>
* Copyright (C) 2021 Eduard Drusa <ventyl86(at)netkosice(dot)sk>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/** @{ */
#include <libopencm3/nrf/gpio.h>
/** @brief Atomic set output
*
* @param[in] gpioport Port identifier @ref gpio_port_id
* @param[in] gpios Pin identifiers @ref gpio_pin_id
*/
void gpio_set(uint32_t gpioport, uint32_t gpios)
{
(void) gpioport;
GPIO_OUTSET = gpios;
}
/** @brief Atomic clear output
*
* @param[in] gpioport Port identifier @ref gpio_port_id
* @param[in] gpios Pin identifiers @ref gpio_pin_id
*/
void gpio_clear(uint32_t gpioport, uint32_t gpios)
{
(void) gpioport;
GPIO_OUTCLR = gpios;
}
/** @brief Toggle output
*
* @param[in] gpioport Port identifier @ref gpio_port_id
* @param[in] gpios Pin identifiers @ref gpio_pin_id
*/
void gpio_toggle(uint32_t gpioport, uint32_t gpios)
{
(void) gpioport;
uint32_t reg_val = GPIO_OUT;
GPIO_OUTCLR = reg_val & gpios;
GPIO_OUTSET = (~reg_val) & gpios;
}
/** @brief Read GPIO values
*
* @param[in] gpioport Port identifier @ref gpio_port_id
* @param[in] gpios Pin identifiers @ref gpio_pin_id
*/
uint32_t gpio_get(uint32_t gpioport, uint32_t gpios)
{
(void) gpioport;
return GPIO_IN & gpios;
}
/** @brief Set GPIO Pin Mode
*
* Sets the mode (input/output) and configuration (analog/digitial and
* open drain/push pull), for a set of GPIO pins on a given GPIO port.
*
* @param[in] gpioport Port identifier @ref gpio_port_id
* @param[in] mode Pin mode @ref gpio_mode
* @param[in] pull_up_down Pull up / pull down configuration @ref gpio_pupd
* @param[in] gpios Pin identifiers @ref gpio_pin_id
* If multiple pins are to be set, use bitwise OR '|' to separate
* them.
*/
void gpio_mode_setup(uint32_t gpioport, uint32_t mode, uint32_t pull_up_down,
uint32_t gpios)
{
(void) gpioport;
uint8_t i = 0;
while (gpios) {
if (gpios & 1) {
GPIO_PIN_CNF(i) = (
GPIO_PIN_CNF(i) &
~((GPIO_CNF_MODE_MASK << GPIO_CNF_MODE_SHIFT)
| (GPIO_CNF_PUPD_MASK << GPIO_CNF_PUPD_SHIFT)
)
) | (mode << GPIO_CNF_MODE_SHIFT)
| (pull_up_down << GPIO_CNF_PUPD_SHIFT);
}
++i;
gpios >>= 1;
}
}
/** Configure GPIO pin input and output specifics.
*
* Configure drive strength and input sensing for given GPIO port.
* @param [in] gpioport GPIO port identifier, see @ref gpio_port_id
* @param [in] drive Drive schema used to drive pin, see @ref gpio_drive
* @param [in] sense Pin sensing mechanism, see @ref gpio_sense
* @param[in] gpios Pin identifiers @ref gpio_pin_id
* If multiple pins are to be set, use bitwise OR '|' to separate
* them.
*/
void gpio_set_options(uint32_t gpioport, uint32_t drive, uint32_t sense,
uint32_t gpios)
{
(void) gpioport;
uint8_t i = 0;
while (gpios) {
if (gpios & 1) {
GPIO_PIN_CNF(i) = (GPIO_PIN_CNF(i) &
~((GPIO_CNF_DRIVE_MASK << GPIO_CNF_DRIVE_SHIFT)
| (GPIO_CNF_SENSE_MASK << GPIO_CNF_SENSE_SHIFT)
)
) | (drive << GPIO_CNF_DRIVE_SHIFT)
| (sense << GPIO_CNF_SENSE_SHIFT);
}
++i;
gpios >>= 1;
}
}
/** @brief Configure Task in GPIO TE Module
*
* @param[in] task_num uint8_t Task number (0-3)
* @param[in] pin_num uint8_t GPIO Pin number (0-31)
* @param[in] polarity uint8_t polarity Operation to perform when task is triggered.
* @param[in] init uint8_t Initial state of the pin, non-zero means initially active,
* zero means initially inactive
*/
void gpio_configure_task(uint8_t task_num,
uint8_t pin_num, uint8_t polarity, uint32_t init)
{
/* any non-zero value means, that pin is active */
if (init) {
init = GPIO_TE_CONFIG_OUTINIT;
}
GPIO_TE_CONFIG(task_num) = (GPIO_TE_MODE_TASK << GPIO_TE_CONFIG_MODE_SHIFT)
| (pin_num << GPIO_TE_CONFIG_PSEL_SHIFT)
| (polarity << GPIO_TE_CONFIG_POLARITY_SHIFT)
| init;
}
/** @brief Configure Event in GPIO TE Module
*
* @param[in] event_num Event number (0-3)
* @param[in] pin_num GPIO Pin number (0-31)
* @param[in] polarity Operation to perform when task is triggered.
*/
void gpio_configure_event(uint8_t event_num, uint8_t pin_num, uint8_t polarity)
{
GPIO_TE_CONFIG(event_num) = (GPIO_TE_MODE_EVENT << GPIO_TE_CONFIG_MODE_SHIFT)
| (pin_num << GPIO_TE_CONFIG_PSEL_SHIFT)
| (polarity << GPIO_TE_CONFIG_POLARITY_SHIFT);
}
/** @brief Enable GPIO interrupts
*
* @param[in] mask interrupts to enable.
*/
void gpio_enable_interrupts(uint32_t mask)
{
GPIO_INTENSET = mask;
}
/** @brief Disable GPIO interrupts
*
* @param[in] mask interrupts to disable.
*/
void gpio_disable_interrupts(uint32_t mask)
{
GPIO_INTENCLR = mask;
}
/** @brief Disable all GPIO interrupts
*
*/
void gpio_clear_interrupts(void)
{
GPIO_INTENCLR = 0xffffffff;
}
/** @} */