lora-car/libopencm3/lib/lpc43xx/ssp.c

141 lines
3.2 KiB
C
Raw Normal View History

/** @defgroup ssp_file SSP
@ingroup LPC43xx
@brief <b>libopencm3 LPC43xx SSP</b>
@version 1.0.0
@author @htmlonly &copy; @endhtmlonly 2012 Benjamin Vernoux <titanmkd@gmail.com>
LGPL License Terms @ref lgpl_license
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2012 Benjamin Vernoux <titanmkd@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/**@{*/
#include <libopencm3/lpc43xx/ssp.h>
#include <libopencm3/lpc43xx/cgu.h>
/* Disable SSP */
void ssp_disable(ssp_num_t ssp_num)
{
uint32_t ssp_port;
if (ssp_num == SSP0_NUM) {
ssp_port = SSP0;
} else {
ssp_port = SSP1;
}
/* Disable SSP */
SSP_CR1(ssp_port) = 0x0;
}
/*
* SSP Init function
*/
void ssp_init(ssp_num_t ssp_num,
ssp_datasize_t data_size,
ssp_frame_format_t frame_format,
ssp_cpol_cpha_t cpol_cpha_format,
uint8_t serial_clock_rate,
uint8_t clk_prescale,
ssp_mode_t mode,
ssp_master_slave_t master_slave,
ssp_slave_option_t slave_option)
{
uint32_t ssp_port;
uint32_t clock;
if (ssp_num == SSP0_NUM) {
ssp_port = SSP0;
} else {
ssp_port = SSP1;
}
/* use PLL1 as clock source for SSP1 */
CGU_BASE_SSP1_CLK =
CGU_BASE_SSP1_CLK_CLK_SEL(CGU_SRC_PLL1)
| CGU_BASE_SSP1_CLK_AUTOBLOCK;
/* Disable SSP before to configure it */
SSP_CR1(ssp_port) = 0x0;
/* Configure SSP */
clock = serial_clock_rate;
SSP_CPSR(ssp_port) = clk_prescale;
SSP_CR0(ssp_port) =
(data_size | frame_format | cpol_cpha_format | (clock<<8));
/* Enable SSP */
SSP_CR1(ssp_port) = (SSP_ENABLE | mode | master_slave | slave_option);
}
static void ssp_wait_until_not_busy(ssp_num_t ssp_num)
{
uint32_t ssp_port;
if (ssp_num == SSP0_NUM) {
ssp_port = SSP0;
} else {
ssp_port = SSP1;
}
while ((SSP_SR(ssp_port) & SSP_SR_BSY));
}
/* This Function Wait Data TX Ready, and Write Data to SSP */
uint16_t ssp_transfer(ssp_num_t ssp_num, uint16_t data)
{
uint32_t ssp_port;
if (ssp_num == SSP0_NUM) {
ssp_port = SSP0;
} else {
ssp_port = SSP1;
}
/* Wait Until FIFO not full */
while ((SSP_SR(ssp_port) & SSP_SR_TNF) == 0);
SSP_DR(ssp_port) = data;
/* Wait for not busy, since we're controlling CS# of
* devices manually and need to wait for the data to
* be sent. It may also be important to wait here
* in case we're configuring devices via SPI and also
* with GPIO control -- we need to know when SPI
* commands are effective before altering a device's
* state with GPIO. I'm thinking the MAX2837, for
* example...
*/
ssp_wait_until_not_busy(ssp_num);
/* Wait Until Data Received (Rx FIFO not Empty) */
while ((SSP_SR(ssp_port) & SSP_SR_RNE) == 0);
return SSP_DR(ssp_port);
}
/**@}*/