Arti Zirk
054740c5de
subrepo: subdir: "libopencm3" merged: "88e91c9a7cce" upstream: origin: "https://github.com/libopencm3/libopencm3.git" branch: "master" commit: "88e91c9a7cce" git-subrepo: version: "0.4.3" origin: "???" commit: "???"
244 lines
6.3 KiB
C
244 lines
6.3 KiB
C
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2012 Benjamin Vernoux <titanmkd@gmail.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/lpc43xx/uart.h>
|
|
#include <libopencm3/lpc43xx/cgu.h>
|
|
|
|
#define UART_SRC_32K 0x00
|
|
#define UART_SRC_IRC 0x01
|
|
#define UART_SRC_ENET_RX 0x02
|
|
#define UART_SRC_ENET_TX 0x03
|
|
#define UART_SRC_GP_CLKIN 0x04
|
|
#define UART_SRC_XTAL 0x06
|
|
#define UART_SRC_PLL0USB 0x07
|
|
#define UART_SRC_PLL0AUDIO 0x08
|
|
#define UART_SRC_PLL1 0x09
|
|
#define UART_SRC_IDIVA 0x0C
|
|
#define UART_SRC_IDIVB 0x0D
|
|
#define UART_SRC_IDIVC 0x0E
|
|
#define UART_SRC_IDIVD 0x0F
|
|
#define UART_SRC_IDIVE 0x10
|
|
|
|
#define UART_CGU_AUTOBLOCK_CLOCK_BIT 11
|
|
/* clock source selection (5 bits) */
|
|
#define UART_CGU_BASE_CLK_SEL_SHIFT 24
|
|
|
|
uint32_t dummy_read;
|
|
|
|
/*
|
|
* UART Init function
|
|
*/
|
|
void uart_init(uart_num_t uart_num, uart_databit_t data_nb_bits,
|
|
uart_stopbit_t data_nb_stop, uart_parity_t data_parity,
|
|
uint16_t uart_divisor, uint8_t uart_divaddval, uint8_t uart_mulval)
|
|
{
|
|
uint32_t lcr_config;
|
|
uint32_t uart_port;
|
|
|
|
uart_port = uart_num;
|
|
|
|
switch (uart_num) {
|
|
case UART0_NUM:
|
|
/* use PLL1 as clock source for UART0 */
|
|
CGU_BASE_UART0_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
|
|
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
|
|
break;
|
|
|
|
case UART1_NUM:
|
|
/* use PLL1 as clock source for UART1 */
|
|
CGU_BASE_UART1_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
|
|
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
|
|
break;
|
|
|
|
case UART2_NUM:
|
|
/* use PLL1 as clock source for UART2 */
|
|
CGU_BASE_UART2_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
|
|
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
|
|
break;
|
|
|
|
case UART3_NUM:
|
|
/* use PLL1 as clock source for UART3 */
|
|
CGU_BASE_UART3_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
|
|
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
|
|
break;
|
|
|
|
default:
|
|
return; /* error */
|
|
}
|
|
|
|
/* FIFOs RX/TX Enabled and Reset RX/TX FIFO (DMA Mode is also cleared)*/
|
|
UART_FCR(uart_port) = (UART_FCR_FIFO_EN | UART_FCR_RX_RS |
|
|
UART_FCR_TX_RS);
|
|
/* Disable FIFO */
|
|
UART_FCR(uart_port) = 0;
|
|
|
|
/* Dummy read (to clear existing data) */
|
|
while (UART_LSR(uart_port) & UART_LSR_RDR) {
|
|
dummy_read = UART_RBR(uart_port);
|
|
}
|
|
|
|
/* Wait end of TX & disable TX */
|
|
UART_TER(uart_port) = UART_TER_TXEN;
|
|
|
|
/* Wait for current transmit complete */
|
|
while (!(UART_LSR(uart_port) & UART_LSR_THRE));
|
|
|
|
/* Disable Tx */
|
|
UART_TER(uart_port) = 0;
|
|
|
|
/* Disable interrupt */
|
|
UART_IER(uart_port) = 0;
|
|
|
|
/* Set LCR to default state */
|
|
UART_LCR(uart_port) = 0;
|
|
|
|
/* Set ACR to default state */
|
|
UART_ACR(uart_port) = 0;
|
|
|
|
/* Dummy Read to Clear Status */
|
|
dummy_read = UART_LSR(uart_port);
|
|
|
|
/*
|
|
Table 835. USART Fractional Divider Register:
|
|
UARTbaudrate = PCLK / ( 16* (((256*DLM)+ DLL)*(1+(DivAddVal/MulVal))) )
|
|
The value of MULVAL and DIVADDVAL should comply to the following
|
|
conditions:
|
|
1. 1 <= MULVAL <= 15
|
|
2. 0 <= DIVADDVAL <= 14
|
|
3. DIVADDVAL < MULVAL
|
|
*/
|
|
|
|
/* Set DLAB Bit */
|
|
UART_LCR(uart_port) |= UART_LCR_DLAB_EN;
|
|
UART_DLM(uart_port) = UART_LOAD_DLM(uart_divisor);
|
|
UART_DLL(uart_port) = UART_LOAD_DLL(uart_divisor);
|
|
/* Clear DLAB Bit */
|
|
UART_LCR(uart_port) &= (~UART_LCR_DLAB_EN) & UART_LCR_BITMASK;
|
|
UART_FDR(uart_port) = UART_FDR_BITMASK &
|
|
(UART_FDR_MULVAL(uart_mulval) | UART_FDR_DIVADDVAL(uart_divaddval));
|
|
|
|
/* Read LCR config & Force Enable of Divisor Latches Access */
|
|
lcr_config = (UART_LCR(uart_port) & UART_LCR_DLAB_EN) &
|
|
UART_LCR_BITMASK;
|
|
lcr_config |= data_nb_bits; /* Set Nb Data Bits */
|
|
lcr_config |= data_nb_stop; /* Set Nb Stop Bits */
|
|
lcr_config |= data_parity; /* Set Data Parity */
|
|
|
|
/* Write LCR (only 8bits) */
|
|
UART_LCR(uart_port) = (lcr_config & UART_LCR_BITMASK);
|
|
|
|
/* Enable TX */
|
|
UART_TER(uart_port) = UART_TER_TXEN;
|
|
}
|
|
|
|
/*
|
|
* This Function return if data are received or not received.
|
|
*/
|
|
uart_rx_data_ready_t uart_rx_data_ready(uart_num_t uart_num)
|
|
{
|
|
uint32_t uart_port;
|
|
uint8_t uart_status;
|
|
uart_rx_data_ready_t data_ready;
|
|
|
|
uart_port = uart_num;
|
|
|
|
uart_status = UART_LSR(uart_port) & 0xFF;
|
|
|
|
/* Check Error */
|
|
if ((uart_status & UART_LSR_ERROR_MASK) == 0) {
|
|
/* No errors check if data is ready */
|
|
if ((uart_status & UART_LSR_RDR) == 0) {
|
|
data_ready = UART_RX_NO_DATA;
|
|
} else {
|
|
data_ready = UART_RX_DATA_READY;
|
|
}
|
|
} else {
|
|
/* UART Error */
|
|
data_ready = UART_RX_DATA_ERROR;
|
|
}
|
|
|
|
return data_ready;
|
|
}
|
|
|
|
/*
|
|
* This Function Wait until Data RX Ready, and return Data Read from UART.
|
|
*/
|
|
uint8_t uart_read(uart_num_t uart_num)
|
|
{
|
|
uint32_t uart_port;
|
|
uint8_t uart_val;
|
|
|
|
uart_port = uart_num;
|
|
|
|
/* Wait Until Data Received (Rx Data Not Ready) */
|
|
while ((UART_LSR(uart_port) & UART_LSR_RDR) == 0);
|
|
|
|
uart_val = (UART_RBR(uart_port) & UART_RBR_MASKBIT);
|
|
|
|
return uart_val;
|
|
}
|
|
|
|
/*
|
|
* This Function Wait until Data RX Ready, and return Data Read from UART.
|
|
*/
|
|
uint8_t uart_read_timeout(uart_num_t uart_num, uint32_t rx_timeout_nb_cycles,
|
|
uart_error_t *error)
|
|
{
|
|
uint32_t uart_port;
|
|
uint8_t uart_val;
|
|
uint32_t counter;
|
|
|
|
uart_port = uart_num;
|
|
|
|
/* Wait Until Data Received (Rx Data Not Ready) */
|
|
counter = 0;
|
|
while ((UART_LSR(uart_port) & UART_LSR_RDR) == 0) {
|
|
if (rx_timeout_nb_cycles > 0) {
|
|
counter++;
|
|
if (counter >= rx_timeout_nb_cycles) {
|
|
*error = UART_TIMEOUT_ERROR;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
uart_val = (UART_RBR(uart_port) & UART_RBR_MASKBIT);
|
|
|
|
/* Clear error */
|
|
*error = UART_NO_ERROR;
|
|
|
|
return uart_val;
|
|
}
|
|
|
|
/* This Function Wait Data TX Ready, and Write Data to UART
|
|
if rx_timeout_nb_cycles = 0 Infinite wait
|
|
*/
|
|
void uart_write(uart_num_t uart_num, uint8_t data)
|
|
{
|
|
uint32_t uart_port;
|
|
|
|
uart_port = uart_num;
|
|
|
|
/* Wait Until FIFO not full */
|
|
while ((UART_LSR(uart_port) & UART_LSR_THRE) == 0);
|
|
|
|
UART_THR(uart_port) = data;
|
|
}
|
|
|