lora-car/libopencm3/lib/stm32/common/exti_common_all.c
Arti Zirk 054740c5de git subrepo clone https://github.com/libopencm3/libopencm3.git
subrepo:
  subdir:   "libopencm3"
  merged:   "88e91c9a7cce"
upstream:
  origin:   "https://github.com/libopencm3/libopencm3.git"
  branch:   "master"
  commit:   "88e91c9a7cce"
git-subrepo:
  version:  "0.4.3"
  origin:   "???"
  commit:   "???"
2023-01-21 21:54:42 +02:00

181 lines
4.0 KiB
C

/** @addtogroup exti_file EXTI peripheral API
* @ingroup peripheral_apis
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Mark Butler <mbutler@physics.otago.ac.nz>
* Copyright (C) 2012 Karl Palsson <karlp@tweak.net.au>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*
* This provides the code for the "next gen" EXTI block provided in F2/F4/F7/L1
* devices. (differences only in the source selection)
*/
/**@{*/
#include <libopencm3/stm32/exti.h>
#include <libopencm3/stm32/gpio.h>
#if defined(EXTI_EXTICR)
#define EXTICR_SELECTION_FIELDSIZE EXTI_EXTICR_FIELDSIZE
#define EXTICR_SELECTION_REG(x) EXTI_EXTICR(x)
#elif defined(AFIO_EXTICR)
#define EXTICR_SELECTION_FIELDSIZE AFIO_EXTICR_FIELDSIZE
#define EXTICR_SELECTION_REG(x) AFIO_EXTICR(x)
#else
#include <libopencm3/stm32/syscfg.h>
#define EXTICR_SELECTION_FIELDSIZE SYSCFG_EXTICR_FIELDSIZE
#define EXTICR_SELECTION_REG(x) SYSCFG_EXTICR(x)
#endif
void exti_set_trigger(uint32_t extis, enum exti_trigger_type trig)
{
switch (trig) {
case EXTI_TRIGGER_RISING:
EXTI_RTSR |= extis;
EXTI_FTSR &= ~extis;
break;
case EXTI_TRIGGER_FALLING:
EXTI_RTSR &= ~extis;
EXTI_FTSR |= extis;
break;
case EXTI_TRIGGER_BOTH:
EXTI_RTSR |= extis;
EXTI_FTSR |= extis;
break;
}
}
void exti_enable_request(uint32_t extis)
{
/* Enable interrupts. */
EXTI_IMR |= extis;
/* Enable events. */
EXTI_EMR |= extis;
}
void exti_disable_request(uint32_t extis)
{
/* Disable interrupts. */
EXTI_IMR &= ~extis;
/* Disable events. */
EXTI_EMR &= ~extis;
}
/*
* Reset the interrupt request by writing a 1 to the corresponding
* pending bit register.
*/
void exti_reset_request(uint32_t extis)
{
#if defined(EXTI_RPR1) && defined(EXTI_FPR1)
EXTI_RPR1 = extis;
EXTI_FPR1 = extis;
#else
EXTI_PR = extis;
#endif
}
/*
* Check the flag of a given EXTI interrupt.
* */
uint32_t exti_get_flag_status(uint32_t exti)
{
#if defined(EXTI_RPR1) && defined(EXTI_FPR1)
return (EXTI_RPR1 & exti) | (EXTI_FPR1 & exti);
#else
return EXTI_PR & exti;
#endif
}
/*
* Remap an external interrupt line to the corresponding pin on the
* specified GPIO port.
*
* TODO: This could be rewritten in fewer lines of code.
*/
void exti_select_source(uint32_t exti, uint32_t gpioport)
{
uint32_t line;
for (line = 0; line < 16; line++) {
if (!(exti & (1 << line))) {
continue;
}
uint32_t bits = 0;
switch (gpioport) {
case GPIOA:
bits = 0;
break;
case GPIOB:
bits = 1;
break;
case GPIOC:
bits = 2;
break;
case GPIOD:
bits = 3;
break;
#if defined(GPIOE) && defined(GPIO_PORT_E_BASE)
case GPIOE:
bits = 4;
break;
#endif
#if defined(GPIOF) && defined(GPIO_PORT_F_BASE)
case GPIOF:
bits = 5;
break;
#endif
#if defined(GPIOG) && defined(GPIO_PORT_G_BASE)
case GPIOG:
bits = 6;
break;
#endif
#if defined(GPIOH) && defined(GPIO_PORT_H_BASE)
case GPIOH:
bits = 7;
break;
#endif
#if defined(GPIOI) && defined(GPIO_PORT_I_BASE)
case GPIOI:
bits = 8;
break;
#endif
#if defined(GPIOJ) && defined(GPIO_PORT_J_BASE)
case GPIOJ:
bits = 9;
break;
#endif
#if defined(GPIOK) && defined(GPIO_PORT_K_BASE)
case GPIOK:
bits = 10;
break;
#endif
}
uint8_t shift = (uint8_t)(EXTICR_SELECTION_FIELDSIZE * (line % 4));
uint32_t mask = ((1 << EXTICR_SELECTION_FIELDSIZE) - 1) << shift;
uint32_t reg = line / 4;
EXTICR_SELECTION_REG(reg) = (EXTICR_SELECTION_REG(reg) & ~mask) | (bits << shift);
};
}
/**@}*/