stm32f4-nucleo-test/libopencm3/scripts/data/lpc43xx/gpdma.yaml

1499 lines
35 KiB
YAML
Raw Normal View History

!!omap
- GPDMA_INTSTAT:
fields: !!omap
- INTSTAT:
access: r
description: Status of DMA channel interrupts after masking
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_INTTCSTAT:
fields: !!omap
- INTTCSTAT:
access: r
description: Terminal count interrupt request status for DMA channels
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_INTTCCLEAR:
fields: !!omap
- INTTCCLEAR:
access: w
description: Allows clearing the Terminal count interrupt request (IntTCStat)
for DMA channels
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_INTERRSTAT:
fields: !!omap
- INTERRSTAT:
access: r
description: Interrupt error status for DMA channels
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_INTERRCLR:
fields: !!omap
- INTERRCLR:
access: w
description: Writing a 1 clears the error interrupt request (IntErrStat) for
DMA channels
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_RAWINTTCSTAT:
fields: !!omap
- RAWINTTCSTAT:
access: r
description: Status of the terminal count interrupt for DMA channels prior
to masking
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_RAWINTERRSTAT:
fields: !!omap
- RAWINTERRSTAT:
access: r
description: Status of the error interrupt for DMA channels prior to masking
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_ENBLDCHNS:
fields: !!omap
- ENABLEDCHANNELS:
access: r
description: Enable status for DMA channels
lsb: 0
reset_value: '0x00'
width: 8
- GPDMA_SOFTBREQ:
fields: !!omap
- SOFTBREQ:
access: rw
description: Software burst request flags for each of 16 possible sources
lsb: 0
reset_value: '0x00'
width: 16
- GPDMA_SOFTSREQ:
fields: !!omap
- SOFTSREQ:
access: rw
description: Software single transfer request flags for each of 16 possible
sources
lsb: 0
reset_value: '0x00'
width: 16
- GPDMA_SOFTLBREQ:
fields: !!omap
- SOFTLBREQ:
access: rw
description: Software last burst request flags for each of 16 possible sources
lsb: 0
reset_value: '0x00'
width: 16
- GPDMA_SOFTLSREQ:
fields: !!omap
- SOFTLSREQ:
access: rw
description: Software last single transfer request flags for each of 16 possible
sources
lsb: 0
reset_value: '0x00'
width: 16
- GPDMA_CONFIG:
fields: !!omap
- E:
access: rw
description: DMA Controller enable
lsb: 0
reset_value: '0'
width: 1
- M0:
access: rw
description: AHB Master 0 endianness configuration
lsb: 1
reset_value: '0'
width: 1
- M1:
access: rw
description: AHB Master 1 endianness configuration
lsb: 2
reset_value: '0'
width: 1
- GPDMA_SYNC:
fields: !!omap
- DMACSYNC:
access: rw
description: Controls the synchronization logic for DMA request signals
lsb: 0
reset_value: '0x00'
width: 16
- GPDMA_C0SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C1SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C2SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C3SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C4SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C5SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C6SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C7SRCADDR:
fields: !!omap
- SRCADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C0DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C1DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C2DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C3DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C4DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C5DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C6DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C7DESTADDR:
fields: !!omap
- DESTADDR:
access: rw
description: DMA source address
lsb: 0
reset_value: '0x00000000'
width: 32
- GPDMA_C0LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C1LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C2LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C3LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C4LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C5LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C6LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C7LLI:
fields: !!omap
- LM:
access: rw
description: AHB master select for loading the next LLI
lsb: 0
reset_value: '0'
width: 1
- LLI:
access: rw
description: Linked list item
lsb: 2
reset_value: '0x00000000'
width: 30
- GPDMA_C0CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C1CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C2CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C3CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C4CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C5CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C6CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C7CONTROL:
fields: !!omap
- TRANSFERSIZE:
access: rw
description: Transfer size in number of transfers
lsb: 0
reset_value: '0x00'
width: 12
- SBSIZE:
access: rw
description: Source burst size
lsb: 12
reset_value: '0x0'
width: 3
- DBSIZE:
access: rw
description: Destination burst size
lsb: 15
reset_value: '0x0'
width: 3
- SWIDTH:
access: rw
description: Source transfer width
lsb: 18
reset_value: '0x0'
width: 3
- DWIDTH:
access: rw
description: Destination transfer width
lsb: 21
reset_value: '0x0'
width: 3
- S:
access: rw
description: Source AHB master select
lsb: 24
reset_value: '0'
width: 1
- D:
access: rw
description: Destination AHB master select
lsb: 25
reset_value: '0'
width: 1
- SI:
access: rw
description: Source increment
lsb: 26
reset_value: '0'
width: 1
- DI:
access: rw
description: Destination increment
lsb: 27
reset_value: '0'
width: 1
- PROT1:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates that the access is in user mode or privileged mode
lsb: 28
reset_value: '0'
width: 1
- PROT2:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is bufferable or
not bufferable
lsb: 29
reset_value: '0'
width: 1
- PROT3:
access: rw
description: This information is provided to the peripheral during a DMA bus
access and indicates to the peripheral that the access is cacheable or not
cacheable
lsb: 30
reset_value: '0'
width: 1
- I:
access: rw
description: Terminal count interrupt enable bit
lsb: 31
reset_value: '0'
width: 1
- GPDMA_C0CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C1CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C2CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C3CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C4CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C5CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C6CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1
- GPDMA_C7CONFIG:
fields: !!omap
- E:
access: rw
description: Channel enable
lsb: 0
reset_value: '0'
width: 1
- SRCPERIPHERAL:
access: rw
description: Source peripheral
lsb: 1
reset_value: ''
width: 5
- DESTPERIPHERAL:
access: rw
description: Destination peripheral
lsb: 6
reset_value: ''
width: 5
- FLOWCNTRL:
access: rw
description: Flow control and transfer type
lsb: 11
reset_value: ''
width: 3
- IE:
access: rw
description: Interrupt error mask
lsb: 14
reset_value: ''
width: 1
- ITC:
access: rw
description: Terminal count interrupt mask
lsb: 15
reset_value: ''
width: 1
- L:
access: rw
description: Lock
lsb: 16
reset_value: ''
width: 1
- A:
access: r
description: Active
lsb: 17
reset_value: ''
width: 1
- H:
access: rw
description: Halt
lsb: 18
reset_value: ''
width: 1