stm32f4-nucleo-test/libopencm3/scripts/data/lpc43xx/ssp.yaml

446 lines
11 KiB
YAML
Raw Normal View History

!!omap
- SSP0_CR0:
fields: !!omap
- DSS:
access: rw
description: Data Size Select
lsb: 0
reset_value: '0'
width: 4
- FRF:
access: rw
description: Frame Format
lsb: 4
reset_value: '0'
width: 2
- CPOL:
access: rw
description: Clock Out Polarity
lsb: 6
reset_value: '0'
width: 1
- CPHA:
access: rw
description: Clock Out Phase
lsb: 7
reset_value: '0'
width: 1
- SCR:
access: rw
description: Serial Clock Rate
lsb: 8
reset_value: '0'
width: 8
- SSP1_CR0:
fields: !!omap
- DSS:
access: rw
description: Data Size Select
lsb: 0
reset_value: '0'
width: 4
- FRF:
access: rw
description: Frame Format
lsb: 4
reset_value: '0'
width: 2
- CPOL:
access: rw
description: Clock Out Polarity
lsb: 6
reset_value: '0'
width: 1
- CPHA:
access: rw
description: Clock Out Phase
lsb: 7
reset_value: '0'
width: 1
- SCR:
access: rw
description: Serial Clock Rate
lsb: 8
reset_value: '0'
width: 8
- SSP0_CR1:
fields: !!omap
- LBM:
access: rw
description: Loop Back Mode
lsb: 0
reset_value: '0'
width: 1
- SSE:
access: rw
description: SSP Enable
lsb: 1
reset_value: '0'
width: 1
- MS:
access: rw
description: Master/Slave Mode
lsb: 2
reset_value: '0'
width: 1
- SOD:
access: rw
description: Slave Output Disable
lsb: 3
reset_value: '0'
width: 1
- SSP1_CR1:
fields: !!omap
- SSE:
access: rw
description: SSP Enable
lsb: 1
reset_value: '0'
width: 1
- MS:
access: rw
description: Master/Slave Mode
lsb: 2
reset_value: '0'
width: 1
- SOD:
access: rw
description: Slave Output Disable
lsb: 3
reset_value: '0'
width: 1
- SSP0_DR:
fields: !!omap
- DATA:
access: rw
description: Software can write data to be transmitted to this register, and
read data that has been
lsb: 0
reset_value: '0'
width: 16
- SSP1_DR:
fields: !!omap
- DATA:
access: rw
description: Software can write data to be transmitted to this register, and
read data that has been
lsb: 0
reset_value: '0'
width: 16
- SSP0_SR:
fields: !!omap
- TFE:
access: r
description: Transmit FIFO Empty
lsb: 0
reset_value: '1'
width: 1
- TNF:
access: r
description: Transmit FIFO Not Full
lsb: 1
reset_value: '1'
width: 1
- RNE:
access: r
description: Receive FIFO Not Empty
lsb: 2
reset_value: '0'
width: 1
- RFF:
access: r
description: Receive FIFO Full
lsb: 3
reset_value: '0'
width: 1
- BSY:
access: r
description: Busy.
lsb: 4
reset_value: '0'
width: 1
- SSP1_SR:
fields: !!omap
- TFE:
access: r
description: Transmit FIFO Empty
lsb: 0
reset_value: '1'
width: 1
- TNF:
access: r
description: Transmit FIFO Not Full
lsb: 1
reset_value: '1'
width: 1
- RNE:
access: r
description: Receive FIFO Not Empty
lsb: 2
reset_value: '0'
width: 1
- RFF:
access: r
description: Receive FIFO Full
lsb: 3
reset_value: '0'
width: 1
- BSY:
access: r
description: Busy.
lsb: 4
reset_value: '0'
width: 1
- SSP0_CPSR:
fields: !!omap
- CPSDVSR:
access: rw
description: SSP Clock Prescale Register
lsb: 0
reset_value: '0'
width: 8
- SSP1_CPSR:
fields: !!omap
- CPSDVSR:
access: rw
description: SSP Clock Prescale Register
lsb: 0
reset_value: '0'
width: 8
- SSP0_IMSC:
fields: !!omap
- RORIM:
access: rw
description: Software should set this bit to enable interrupt when a Receive
Overrun occurs
lsb: 0
reset_value: '0'
width: 1
- RTIM:
access: rw
description: Software should set this bit to enable interrupt when a Receive
Time-out condition occurs
lsb: 1
reset_value: '0'
width: 1
- RXIM:
access: rw
description: Software should set this bit to enable interrupt when the Rx
FIFO is at least half full
lsb: 2
reset_value: '0'
width: 1
- TXIM:
access: rw
description: Software should set this bit to enable interrupt when the Tx
FIFO is at least half empty
lsb: 3
reset_value: '0'
width: 1
- SSP1_IMSC:
fields: !!omap
- RORIM:
access: rw
description: Software should set this bit to enable interrupt when a Receive
Overrun occurs
lsb: 0
reset_value: '0'
width: 1
- RTIM:
access: rw
description: Software should set this bit to enable interrupt when a Receive
Time-out condition occurs
lsb: 1
reset_value: '0'
width: 1
- RXIM:
access: rw
description: Software should set this bit to enable interrupt when the Rx
FIFO is at least half full
lsb: 2
reset_value: '0'
width: 1
- TXIM:
access: rw
description: Software should set this bit to enable interrupt when the Tx
FIFO is at least half empty
lsb: 3
reset_value: '0'
width: 1
- SSP0_RIS:
fields: !!omap
- RORRIS:
access: r
description: This bit is 1 if another frame was completely received while
the RxFIFO was full
lsb: 0
reset_value: '0'
width: 1
- RTRIS:
access: r
description: This bit is 1 if the Rx FIFO is not empty, and has not been read
for a time-out period
lsb: 1
reset_value: '0'
width: 1
- RXRIS:
access: r
description: This bit is 1 if the Rx FIFO is at least half full
lsb: 2
reset_value: '0'
width: 1
- TXRIS:
access: r
description: This bit is 1 if the Tx FIFO is at least half empty
lsb: 3
reset_value: '1'
width: 1
- SSP1_RIS:
fields: !!omap
- RORRIS:
access: r
description: This bit is 1 if another frame was completely received while
the RxFIFO was full
lsb: 0
reset_value: '0'
width: 1
- RTRIS:
access: r
description: This bit is 1 if the Rx FIFO is not empty, and has not been read
for a time-out period
lsb: 1
reset_value: '0'
width: 1
- RXRIS:
access: r
description: This bit is 1 if the Rx FIFO is at least half full
lsb: 2
reset_value: '0'
width: 1
- TXRIS:
access: r
description: This bit is 1 if the Tx FIFO is at least half empty
lsb: 3
reset_value: '1'
width: 1
- SSP0_MIS:
fields: !!omap
- RORMIS:
access: r
description: This bit is 1 if another frame was completely received while
the RxFIFO was full, and this interrupt is enabled
lsb: 0
reset_value: '0'
width: 1
- RTMIS:
access: r
description: This bit is 1 if the Rx FIFO is not empty, has not been read
for a time-out period, and this interrupt is enabled
lsb: 1
reset_value: '0'
width: 1
- RXMIS:
access: r
description: This bit is 1 if the Rx FIFO is at least half full, and this
interrupt is enabled
lsb: 2
reset_value: '0'
width: 1
- TXMIS:
access: r
description: This bit is 1 if the Tx FIFO is at least half empty, and this
interrupt is enabled
lsb: 3
reset_value: '0'
width: 1
- SSP1_MIS:
fields: !!omap
- RORMIS:
access: r
description: This bit is 1 if another frame was completely received while
the RxFIFO was full, and this interrupt is enabled
lsb: 0
reset_value: '0'
width: 1
- RTMIS:
access: r
description: This bit is 1 if the Rx FIFO is not empty, has not been read
for a time-out period, and this interrupt is enabled
lsb: 1
reset_value: '0'
width: 1
- RXMIS:
access: r
description: This bit is 1 if the Rx FIFO is at least half full, and this
interrupt is enabled
lsb: 2
reset_value: '0'
width: 1
- TXMIS:
access: r
description: This bit is 1 if the Tx FIFO is at least half empty, and this
interrupt is enabled
lsb: 3
reset_value: '0'
width: 1
- SSP0_ICR:
fields: !!omap
- RORIC:
access: w
description: Writing a 1 to this bit clears the 'frame was received when RxFIFO
was full' interrupt
lsb: 0
reset_value: ''
width: 1
- RTIC:
access: w
description: Writing a 1 to this bit clears the Rx FIFO was not empty and
has not been read for a time-out period interrupt
lsb: 1
reset_value: ''
width: 1
- SSP1_ICR:
fields: !!omap
- RORIC:
access: w
description: Writing a 1 to this bit clears the 'frame was received when RxFIFO
was full' interrupt
lsb: 0
reset_value: ''
width: 1
- RTIC:
access: w
description: Writing a 1 to this bit clears the Rx FIFO was not empty and
has not been read for a time-out period interrupt
lsb: 1
reset_value: ''
width: 1
- SSP0_DMACR:
fields: !!omap
- RXDMAE:
access: rw
description: Receive DMA Enable
lsb: 0
reset_value: '0'
width: 1
- TXDMAE:
access: rw
description: Transmit DMA Enable
lsb: 1
reset_value: '0'
width: 1
- SSP1_DMACR:
fields: !!omap
- RXDMAE:
access: rw
description: Receive DMA Enable
lsb: 0
reset_value: '0'
width: 1
- TXDMAE:
access: rw
description: Transmit DMA Enable
lsb: 1
reset_value: '0'
width: 1