Arti Zirk
2de3a91b0a
subrepo: subdir: "libopencm3" merged: "88e91c9a7cce" upstream: origin: "https://github.com/libopencm3/libopencm3.git" branch: "master" commit: "88e91c9a7cce" git-subrepo: version: "0.4.3" origin: "???" commit: "???"
172 lines
4.4 KiB
C
172 lines
4.4 KiB
C
/** @addtogroup uart_file UART peripheral API
|
|
*
|
|
* @brief <b>Access functions for the UART controller</b>
|
|
*
|
|
* @ingroup peripheral_apis
|
|
* LGPL License Terms @ref lgpl_license
|
|
* @author @htmlonly © @endhtmlonly 2016
|
|
* Maxim Sloyko <maxims@google.com>
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2017-2018 Unicore MX project<dev(at)lists(dot)unicore-mx(dot)org>
|
|
* Copyright (C) 2021 Eduard Drusa <ventyl86(at)netkosice(dot)sk>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/nrf/uart.h>
|
|
#include <libopencm3/nrf/gpio.h>
|
|
/**@{*/
|
|
|
|
/** @brief Enable the peripheral
|
|
*
|
|
* @param[in] uart uint32_t uart base
|
|
*/
|
|
void uart_enable(uint32_t uart)
|
|
{
|
|
UART_ENABLE(uart) = UART_ENABLE_ENABLED;
|
|
}
|
|
|
|
/** @brief Disable the peripheral
|
|
*
|
|
* @param[in] uart uint32_t uart base
|
|
*/
|
|
void uart_disable(uint32_t uart)
|
|
{
|
|
UART_ENABLE(uart) = UART_ENABLE_DISABLED;
|
|
}
|
|
|
|
/** @brief Configure UART parameters in single call
|
|
*
|
|
* @details Any pin number can be set to 0xff (or any number larger than UART_MAX_PIN)
|
|
* to disconnect that pin.
|
|
*
|
|
* @param[in] uart uint32_t uart base
|
|
* @param[in] tx_pin uint8_t TX pin number
|
|
* @param[in] rx_pin uint8_t RX pin number
|
|
* @param[in] rts_pin uint8_t RTS pin number
|
|
* @param[in] cts_pin uint8_t CTS pin number
|
|
* @param[in] br enum uart_baud baud rate
|
|
* @param[in] enable_parity bool If true, enable parity bit
|
|
*/
|
|
void uart_configure(uint32_t uart,
|
|
uint32_t tx_pin, uint32_t rx_pin, uint32_t rts_pin, uint32_t cts_pin,
|
|
enum uart_baud br, bool enable_parity)
|
|
{
|
|
uart_set_pins(uart, rx_pin, tx_pin, cts_pin, rts_pin);
|
|
|
|
uint32_t reg_config = enable_parity ? UART_CONFIG_PARITY : 0;
|
|
if (rts_pin <= UART_MAX_PIN || cts_pin <= UART_MAX_PIN) {
|
|
reg_config |= UART_CONFIG_HWFC;
|
|
}
|
|
|
|
UART_CONFIG(uart) = reg_config;
|
|
uart_set_baudrate(uart, br);
|
|
}
|
|
|
|
/** @brief Select GPIO pins to be used by this peripheral.
|
|
*
|
|
* This needs to be configured while UART peripheral is disabled.
|
|
*
|
|
* @param[in] uart uart peripheral base.
|
|
* @param[in] rx RX pin. Use GPIO defines in @ref gpio_pin_id or GPIO_UNCONNECTED
|
|
* if signal shall not be connected to any pin.
|
|
* @param[in] tx TX pin. Use GPIO defines in @ref gpio_pin_id or GPIO_UNCONNECTED
|
|
* if signal shall not be connected to any pin.
|
|
* @param[in] cts CTS pin. Use GPIO defines in @ref gpio_pin_id or GPIO_UNCONNECTED
|
|
* if signal shall not be connected to any pin.
|
|
* @param[in] rts RTS pin. Use GPIO defines in @ref gpio_pin_id or GPIO_UNCONNECTED
|
|
* if signal shall not be connected to any pin.
|
|
|
|
*/
|
|
void uart_set_pins(uint32_t uart, uint32_t rx, uint32_t tx, uint32_t cts, uint32_t rts)
|
|
{
|
|
if (rx != GPIO_UNCONNECTED) {
|
|
UART_PSELRXD(uart) = __GPIO2PIN(rx);
|
|
} else {
|
|
UART_PSELRXD(uart) = rx;
|
|
}
|
|
|
|
if (tx != GPIO_UNCONNECTED) {
|
|
UART_PSELTXD(uart) = __GPIO2PIN(tx);
|
|
} else {
|
|
UART_PSELTXD(uart) = tx;
|
|
}
|
|
|
|
if (cts != GPIO_UNCONNECTED) {
|
|
UART_PSELCTS(uart) = __GPIO2PIN(cts);
|
|
} else {
|
|
UART_PSELCTS(uart) = cts;
|
|
}
|
|
|
|
if (rts != GPIO_UNCONNECTED) {
|
|
UART_PSELRTS(uart) = __GPIO2PIN(rts);
|
|
} else {
|
|
UART_PSELRTS(uart) = rts;
|
|
}
|
|
}
|
|
|
|
#undef _LOG2
|
|
|
|
void uart_set_baudrate(uint32_t uart, enum uart_baud br)
|
|
{
|
|
UART_BAUDRATE(uart) = br;
|
|
}
|
|
|
|
void uart_set_parity(uint32_t uart, int parity)
|
|
{
|
|
UART_CONFIG(uart) |= parity ? UART_CONFIG_PARITY : 0;
|
|
}
|
|
|
|
void uart_set_flow_control(uint32_t uart, int flow)
|
|
{
|
|
UART_CONFIG(uart) |= flow ? UART_CONFIG_HWFC : 0;
|
|
}
|
|
|
|
void uart_start_tx(uint32_t uart)
|
|
{
|
|
PERIPH_TRIGGER_TASK(UART_TASK_STARTTX((uart)));
|
|
}
|
|
|
|
void uart_send(uint32_t uart, uint16_t byte)
|
|
{
|
|
UART_TXD((uart)) = byte;
|
|
}
|
|
|
|
void uart_stop_tx(uint32_t uart)
|
|
{
|
|
PERIPH_TRIGGER_TASK(UART_TASK_STOPTX((uart)));
|
|
}
|
|
|
|
void uart_start_rx(uint32_t uart)
|
|
{
|
|
PERIPH_TRIGGER_TASK(UART_TASK_STARTRX((uart)));
|
|
}
|
|
|
|
uint16_t uart_recv(uint32_t uart)
|
|
{
|
|
return UART_RXD(uart);
|
|
}
|
|
|
|
void uart_stop_rx(uint32_t uart)
|
|
{
|
|
PERIPH_TRIGGER_TASK(UART_TASK_STOPRX((uart)));
|
|
}
|
|
/**@}*/
|
|
|