Arti Zirk
2de3a91b0a
subrepo: subdir: "libopencm3" merged: "88e91c9a7cce" upstream: origin: "https://github.com/libopencm3/libopencm3.git" branch: "master" commit: "88e91c9a7cce" git-subrepo: version: "0.4.3" origin: "???" commit: "???"
452 lines
16 KiB
C
452 lines
16 KiB
C
/** @defgroup dma_file DMA peripheral API
|
|
@ingroup peripheral_apis
|
|
@brief DMA library for the multi channel controller found in F0/1/3 & L/G parts.
|
|
|
|
@author @htmlonly © @endhtmlonly 2010 Thomas Otto <tommi@viadmin.org>
|
|
|
|
This library supports the DMA Control System in the STM32 series of ARM Cortex
|
|
Microcontrollers by ST Microelectronics.
|
|
|
|
Up to two DMA controllers are supported. 12 DMA channels are allocated 7 to
|
|
the first DMA controller and 5 to the second. Each channel is connected to
|
|
between 3 and 6 hardware peripheral DMA signals in a logical OR arrangement.
|
|
|
|
DMA transfers can be configured to occur between peripheral and memory in
|
|
any combination including memory to memory. Circular mode transfers are
|
|
also supported in transfers involving a peripheral. An arbiter is provided
|
|
to resolve priority DMA requests. Transfers can be made with 8, 16 or 32 bit
|
|
words.
|
|
|
|
LGPL License Terms @ref lgpl_license
|
|
*/
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**@{*/
|
|
|
|
#include <libopencm3/stm32/dma.h>
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Reset
|
|
|
|
The channel is disabled and configuration registers are cleared.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_channel_reset(uint32_t dma, uint8_t channel)
|
|
{
|
|
/* Disable channel and reset config bits. */
|
|
DMA_CCR(dma, channel) = 0;
|
|
/* Reset data transfer number. */
|
|
DMA_CNDTR(dma, channel) = 0;
|
|
/* Reset peripheral address. */
|
|
DMA_CPAR(dma, channel) = 0;
|
|
/* Reset memory address. */
|
|
DMA_CMAR(dma, channel) = 0;
|
|
/* Reset interrupt flags. */
|
|
DMA_IFCR(dma) |= DMA_IFCR_CIF(channel);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Clear Interrupt Flag
|
|
|
|
The interrupt flag for the channel is cleared. More than one interrupt for the
|
|
same channel may be cleared by using the logical OR of the interrupt flags.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: @ref dma_ch
|
|
@param[in] interrupts unsigned int32. Logical OR of interrupt numbers: @ref
|
|
dma_if_offset
|
|
*/
|
|
|
|
void dma_clear_interrupt_flags(uint32_t dma, uint8_t channel,
|
|
uint32_t interrupts)
|
|
{
|
|
/* Get offset to interrupt flag location in channel field */
|
|
uint32_t flags = (interrupts << DMA_FLAG_OFFSET(channel));
|
|
DMA_IFCR(dma) = flags;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Read Interrupt Flag
|
|
|
|
The interrupt flag for the channel is returned.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: @ref dma_ch
|
|
@param[in] interrupt unsigned int32. Interrupt number: @ref dma_if_offset
|
|
@returns bool interrupt flag is set.
|
|
*/
|
|
|
|
bool dma_get_interrupt_flag(uint32_t dma, uint8_t channel, uint32_t interrupt)
|
|
{
|
|
/* get offset to interrupt flag location in channel field. */
|
|
uint32_t flag = (interrupt << DMA_FLAG_OFFSET(channel));
|
|
return ((DMA_ISR(dma) & flag) > 0);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Memory to Memory Transfers
|
|
|
|
Memory to memory transfers do not require a trigger to activate each transfer.
|
|
Transfers begin immediately the channel has been enabled, and proceed without
|
|
intervention.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_mem2mem_mode(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_MEM2MEM;
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_CIRC;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Set Priority
|
|
|
|
Channel Priority has four levels: low to very high. This has precedence over the
|
|
hardware priority.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@param[in] prio unsigned int32. Priority level @ref dma_ch_pri.
|
|
*/
|
|
|
|
void dma_set_priority(uint32_t dma, uint8_t channel, uint32_t prio)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~(DMA_CCR_PL_MASK);
|
|
DMA_CCR(dma, channel) |= prio;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Set Memory Word Width
|
|
|
|
Set the memory word width 8 bits, 16 bits, or 32 bits. Refer to datasheet for
|
|
alignment information if the source and destination widths do not match.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@param[in] mem_size unsigned int32. Memory word width @ref dma_ch_memwidth.
|
|
*/
|
|
|
|
void dma_set_memory_size(uint32_t dma, uint8_t channel, uint32_t mem_size)
|
|
{
|
|
|
|
DMA_CCR(dma, channel) &= ~(DMA_CCR_MSIZE_MASK);
|
|
DMA_CCR(dma, channel) |= mem_size;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Set Peripheral Word Width
|
|
|
|
Set the peripheral word width 8 bits, 16 bits, or 32 bits. Refer to datasheet
|
|
for alignment information if the source and destination widths do not match, or
|
|
if the peripheral does not support byte or half-word writes.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@param[in] peripheral_size unsigned int32. Peripheral word width @ref
|
|
dma_ch_perwidth.
|
|
*/
|
|
|
|
void dma_set_peripheral_size(uint32_t dma, uint8_t channel,
|
|
uint32_t peripheral_size)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~(DMA_CCR_PSIZE_MASK);
|
|
DMA_CCR(dma, channel) |= peripheral_size;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Memory Increment after Transfer
|
|
|
|
Following each transfer the current memory address is incremented by
|
|
1, 2 or 4 depending on the data size set in @ref dma_set_memory_size. The
|
|
value held by the base memory address register is unchanged.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_memory_increment_mode(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_MINC;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Disable Memory Increment after Transfer
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_disable_memory_increment_mode(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_MINC;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Peripheral Increment after Transfer
|
|
|
|
Following each transfer the current peripheral address is incremented by
|
|
1, 2 or 4 depending on the data size set in @ref dma_set_peripheral_size. The
|
|
value held by the base peripheral address register is unchanged.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_peripheral_increment_mode(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_PINC;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Disable Peripheral Increment after Transfer
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_disable_peripheral_increment_mode(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_PINC;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Memory Circular Mode
|
|
|
|
After the number of bytes/words to be transferred has been completed, the
|
|
original transfer block size, memory and peripheral base addresses are
|
|
reloaded and the process repeats.
|
|
|
|
@note This cannot be used with memory to memory mode, which is explicitly
|
|
disabled here.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_circular_mode(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_CIRC;
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_MEM2MEM;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Transfers from a Peripheral
|
|
|
|
The data direction is set to read from a peripheral.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_set_read_from_peripheral(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_DIR;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Transfers from Memory
|
|
|
|
The data direction is set to read from memory.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_set_read_from_memory(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_DIR;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Interrupt on Transfer Error
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_transfer_error_interrupt(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_TEIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Disable Interrupt on Transfer Error
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_disable_transfer_error_interrupt(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_TEIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Interrupt on Transfer Half Complete
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_half_transfer_interrupt(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_HTIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Disable Interrupt on Transfer Half Complete
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_disable_half_transfer_interrupt(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_HTIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable Interrupt on Transfer Complete
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_transfer_complete_interrupt(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_TCIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Disable Interrupt on Transfer Complete
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_disable_transfer_complete_interrupt(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_TCIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Enable
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_enable_channel(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) |= DMA_CCR_EN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Disable
|
|
|
|
@note The DMA channel registers retain their values when the channel is
|
|
disabled.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
*/
|
|
|
|
void dma_disable_channel(uint32_t dma, uint8_t channel)
|
|
{
|
|
DMA_CCR(dma, channel) &= ~DMA_CCR_EN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Set the Peripheral Address
|
|
|
|
Set the address of the peripheral register to or from which data is to be
|
|
transferred. Refer to the documentation for the specific peripheral.
|
|
|
|
@note The DMA channel must be disabled before setting this address. This
|
|
function has no effect if the channel is enabled.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@param[in] address unsigned int32. Peripheral Address.
|
|
*/
|
|
|
|
void dma_set_peripheral_address(uint32_t dma, uint8_t channel, uint32_t address)
|
|
{
|
|
if (!(DMA_CCR(dma, channel) & DMA_CCR_EN)) {
|
|
DMA_CPAR(dma, channel) = (uint32_t) address;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Set the Base Memory Address
|
|
|
|
@note The DMA channel must be disabled before setting this address. This
|
|
function has no effect if the channel is enabled.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@param[in] address unsigned int32. Memory Initial Address.
|
|
*/
|
|
|
|
void dma_set_memory_address(uint32_t dma, uint8_t channel, uint32_t address)
|
|
{
|
|
if (!(DMA_CCR(dma, channel) & DMA_CCR_EN)) {
|
|
DMA_CMAR(dma, channel) = (uint32_t) address;
|
|
}
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Get the Transfer Block Size
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@returns unsigned int16. Number of remaining data words to transfer (65535
|
|
maximum).
|
|
*/
|
|
|
|
uint16_t dma_get_number_of_data(uint32_t dma, uint8_t channel)
|
|
{
|
|
return DMA_CNDTR(dma, channel);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief DMA Channel Set the Transfer Block Size
|
|
|
|
@note The DMA channel must be disabled before setting this count value. The
|
|
count is not changed if the channel is enabled.
|
|
|
|
@param[in] dma unsigned int32. DMA controller base address: DMA1 or DMA2
|
|
@param[in] channel unsigned int8. Channel number: 1-7 for DMA1 or 1-5 for DMA2
|
|
@param[in] number unsigned int16. Number of data words to transfer (65535
|
|
maximum).
|
|
*/
|
|
|
|
void dma_set_number_of_data(uint32_t dma, uint8_t channel, uint16_t number)
|
|
{
|
|
DMA_CNDTR(dma, channel) = number;
|
|
}
|
|
/**@}*/
|
|
|