Arti Zirk
2de3a91b0a
subrepo: subdir: "libopencm3" merged: "88e91c9a7cce" upstream: origin: "https://github.com/libopencm3/libopencm3.git" branch: "master" commit: "88e91c9a7cce" git-subrepo: version: "0.4.3" origin: "???" commit: "???"
307 lines
9.5 KiB
C
307 lines
9.5 KiB
C
/** @addtogroup usart_file
|
||
@ingroup peripheral_apis
|
||
|
||
@author @htmlonly © @endhtmlonly 2016 Cem Basoglu <cem.basoglu@web.de>
|
||
|
||
*/
|
||
|
||
/*
|
||
* This file is part of the libopencm3 project.
|
||
*
|
||
* Copyright (C) 2016 Cem Basoglu <cem.basoglu@web.de>
|
||
*
|
||
* This library is free software: you can redistribute it and/or modify
|
||
* it under the terms of the GNU Lesser General Public License as published by
|
||
* the Free Software Foundation, either version 3 of the License, or
|
||
* (at your option) any later version.
|
||
*
|
||
* This library is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU Lesser General Public License for more details.
|
||
*
|
||
* You should have received a copy of the GNU Lesser General Public License
|
||
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||
*/
|
||
|
||
/**@{*/
|
||
|
||
#include <libopencm3/stm32/usart.h>
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART enable data inversion
|
||
|
||
Logical data from the data register are send/received in negative/inverse
|
||
logic. (1=L, 0=H). The parity bit is also inverted.
|
||
|
||
@note This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_enable_data_inversion(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) |= USART_CR2_DATAINV;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART disable data inversion
|
||
|
||
Logical data from the data register are send/received in positive/direct logic.
|
||
(1=H, 0=L)
|
||
|
||
@note This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_disable_data_inversion(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) &= ~USART_CR2_DATAINV;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Enable TX pin active level inversion
|
||
|
||
TX pin signal values are inverted. (VDD =0/mark, Gnd=1/idle).
|
||
|
||
@note This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_enable_tx_inversion(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) |= USART_CR2_TXINV;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Disable TX pin active level inversion
|
||
|
||
TX pin signal works using the standard logic levels (VDD =1/idle, Gnd=0/mark)
|
||
|
||
@note This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_disable_tx_inversion(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) &= ~USART_CR2_TXINV;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Enable RX pin active level inversion
|
||
|
||
RX pin signal values are inverted. (VDD =0/mark, Gnd=1/idle).
|
||
|
||
This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_enable_rx_inversion(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) |= USART_CR2_RXINV;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Disable RX pin active level inversion
|
||
|
||
RX pin signal works using the standard logic levels (VDD =1/idle, Gnd=0/mark)
|
||
|
||
This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_disable_rx_inversion(uint32_t usart)
|
||
{
|
||
|
||
USART_CR2(usart) &= ~USART_CR2_RXINV;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Enable Half-duplex
|
||
|
||
- The TX and RX lines are internally connected.
|
||
- The RX pin is no longer used
|
||
- The TX pin is always released when no data is transmitted. Thus,
|
||
it acts as a standard I/O in idle or in reception. It means
|
||
that the I/O must be configured so that TX is configured as
|
||
alternate function open-drain with an external pull-up.
|
||
|
||
Apart from this, the communication protocol is similar to normal USART mode.
|
||
Any conflicts on the line must be managed by software
|
||
|
||
This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_enable_halfduplex(uint32_t usart)
|
||
{
|
||
USART_CR3(usart) |= USART_CR3_HDSEL;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Disable Half-duplex
|
||
|
||
This bit field can only be written when the USART is disabled.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_disable_halfduplex(uint32_t usart)
|
||
{
|
||
USART_CR3(usart) &= ~USART_CR3_HDSEL;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Set receiver timeout value
|
||
|
||
Sets the receive timeout value in terms of number of bit duration.
|
||
The @ref USART_ISR_RTOF is set if, after the last received character,
|
||
no new start bit is detected for more than the receive timeout value.
|
||
|
||
@note The timeout value can also be written when USART is enabled.
|
||
If the new value is lower/equals the internal hardware counter,
|
||
the RTOF flag will be set.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
@param[in] value The receive timeout value in terms of number of bit duration.
|
||
*/
|
||
void usart_set_rx_timeout_value(uint32_t usart, uint32_t value)
|
||
{
|
||
uint32_t reg;
|
||
reg = USART_RTOR(usart) & ~USART_RTOR_RTO_MASK;
|
||
reg |= (USART_RTOR_RTO_VAL(value) & USART_RTOR_RTO_MASK);
|
||
USART_RTOR(usart) = reg;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART enable receive timeout function
|
||
|
||
@note If the USART does not support the Receiver timeout feature,
|
||
this bit is reserved and forced by hardware to ‘0’.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_enable_rx_timeout(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) |= USART_CR2_RTOEN;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART disable receive timeout function
|
||
|
||
@note If the USART does not support the Receiver timeout feature,
|
||
this bit is reserved and forced by hardware to ‘0’.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_disable_rx_timeout(uint32_t usart)
|
||
{
|
||
USART_CR2(usart) &= ~USART_CR2_RTOEN;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART enable receive timeout interrupt
|
||
|
||
An interrupt is generated when the RTOF Flag is set
|
||
in the @ref USART_ISR register.
|
||
|
||
@note If the USART does not support the Receiver timeout feature,
|
||
this bit is reserved and forced by hardware to ‘0’.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_enable_rx_timeout_interrupt(uint32_t usart)
|
||
{
|
||
USART_CR1(usart) |= USART_CR1_RTOIE;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART disable receive timeout interrupt
|
||
|
||
@note If the USART does not support the Receiver timeout feature,
|
||
this bit is reserved and forced by hardware to ‘0’.
|
||
|
||
@param[in] usart USART block register address base @ref usart_reg_base
|
||
*/
|
||
void usart_disable_rx_timeout_interrupt(uint32_t usart)
|
||
{
|
||
USART_CR1(usart) &= ~USART_CR1_RTOIE;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Send a Data Word.
|
||
*
|
||
* @param[in] usart unsigned 32 bit. USART block register address base @ref
|
||
* usart_reg_base
|
||
* @param[in] data unsigned 16 bit.
|
||
*/
|
||
|
||
void usart_send(uint32_t usart, uint16_t data)
|
||
{
|
||
/* Send data. */
|
||
USART_TDR(usart) = (data & USART_TDR_MASK);
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Read a Received Data Word.
|
||
*
|
||
* If parity is enabled the MSB (bit 7 or 8 depending on the word length) is
|
||
* the parity bit.
|
||
*
|
||
* @param[in] usart unsigned 32 bit. USART block register address base @ref
|
||
* usart_reg_base
|
||
* @returns unsigned 16 bit data word.
|
||
*/
|
||
|
||
uint16_t usart_recv(uint32_t usart)
|
||
{
|
||
/* Receive data. */
|
||
return USART_RDR(usart) & USART_RDR_MASK;
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Wait for Transmit Data Buffer Empty
|
||
*
|
||
* Blocks until the transmit data buffer becomes empty and is ready to accept
|
||
* the next data word.
|
||
*
|
||
* @param[in] usart unsigned 32 bit. USART block register address base @ref
|
||
* usart_reg_base
|
||
*/
|
||
|
||
void usart_wait_send_ready(uint32_t usart)
|
||
{
|
||
/* Wait until the data has been transferred into the shift register. */
|
||
while ((USART_ISR(usart) & USART_ISR_TXE) == 0);
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Wait for Received Data Available
|
||
*
|
||
* Blocks until the receive data buffer holds a valid received data word.
|
||
*
|
||
* @param[in] usart unsigned 32 bit. USART block register address base @ref
|
||
* usart_reg_base
|
||
*/
|
||
|
||
void usart_wait_recv_ready(uint32_t usart)
|
||
{
|
||
/* Wait until the data is ready to be received. */
|
||
while ((USART_ISR(usart) & USART_ISR_RXNE) == 0);
|
||
}
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/** @brief USART Read a Status Flag.
|
||
*
|
||
* @param[in] usart unsigned 32 bit. USART block register address base @ref
|
||
* usart_reg_base
|
||
* @param[in] flag Unsigned int32. Status register flag @ref usart_isr_values.
|
||
* @returns boolean: flag set.
|
||
*/
|
||
|
||
bool usart_get_flag(uint32_t usart, uint32_t flag)
|
||
{
|
||
return ((USART_ISR(usart) & flag) != 0);
|
||
}
|
||
|
||
|
||
/**@}*/
|