Arti Zirk
2de3a91b0a
subrepo: subdir: "libopencm3" merged: "88e91c9a7cce" upstream: origin: "https://github.com/libopencm3/libopencm3.git" branch: "master" commit: "88e91c9a7cce" git-subrepo: version: "0.4.3" origin: "???" commit: "???"
152 lines
4.3 KiB
C
152 lines
4.3 KiB
C
/** @addtogroup dac_file DAC peripheral API
|
|
* @ingroup peripheral_apis
|
|
|
|
@author @htmlonly © @endhtmlonly 2020 Ben Brewer <ben.brewer@codethink.co.uk>
|
|
|
|
LGPL License Terms @ref lgpl_license
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2020 Ben Brewer
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**@{*/
|
|
|
|
#include <libopencm3/stm32/dac.h>
|
|
|
|
/** @brief DAC Channel Output Buffer Enable.
|
|
|
|
Enable a digital to analog converter channel output drive buffer. This is an
|
|
optional amplifying buffer that provides additional drive for the output
|
|
signal. The buffer is enabled by default after a reset and needs to be
|
|
explicitly disabled if required.
|
|
|
|
@param[in] dac the base address of the DAC. @ref dac_reg_base
|
|
@param[in] channel with DAC mask. @ref dac_channel_id
|
|
*/
|
|
void dac_buffer_enable(uint32_t dac, int channel)
|
|
{
|
|
switch (channel) {
|
|
case DAC_CHANNEL1:
|
|
DAC_MCR(dac) &= ~DAC_MCR_MODE1_UNBUFFERED;
|
|
break;
|
|
case DAC_CHANNEL2:
|
|
DAC_MCR(dac) &= ~DAC_MCR_MODE2_UNBUFFERED;
|
|
break;
|
|
case DAC_CHANNEL_BOTH:
|
|
DAC_MCR(dac) &= ~(DAC_MCR_MODE1_UNBUFFERED |
|
|
DAC_MCR_MODE2_UNBUFFERED);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** @brief DAC Channel Output Buffer Disable.
|
|
|
|
Disable a digital to analog converter channel output drive buffer. Disabling
|
|
this will reduce power consumption slightly and will increase the output
|
|
impedance of the DAC. The buffers are enabled by default after a reset.
|
|
|
|
@param[in] dac the base address of the DAC. @ref dac_reg_base
|
|
@param[in] channel with DAC mask. @ref dac_channel_id
|
|
*/
|
|
void dac_buffer_disable(uint32_t dac, int channel)
|
|
{
|
|
switch (channel) {
|
|
case DAC_CHANNEL1:
|
|
DAC_MCR(dac) |= DAC_MCR_MODE1_UNBUFFERED;
|
|
break;
|
|
case DAC_CHANNEL2:
|
|
DAC_MCR(dac) |= DAC_MCR_MODE2_UNBUFFERED;
|
|
break;
|
|
case DAC_CHANNEL_BOTH:
|
|
DAC_MCR(dac) |= (DAC_MCR_MODE1_UNBUFFERED
|
|
| DAC_MCR_MODE2_UNBUFFERED);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** @brief DAC Channel Output Mode.
|
|
|
|
Each DAC channel can be configured in Normal mode or Sample and hold mode. The
|
|
output buffer can be enabled to allow a high drive capability. Before enabling
|
|
output buffer, the voltage offset needs to be calibrated. This calibration is
|
|
performed at the factory (loaded after reset) and can be adjusted by software
|
|
during application operation.
|
|
|
|
@note This must be called before enabling the DAC as the settings will then
|
|
become read-only.
|
|
|
|
@param[in] dac the base address of the DAC. @ref dac_reg_base
|
|
@param[in] mode Taken from @ref dac_mode2_sel or @ref dac_mode1_sel or
|
|
a logical OR of one of each of these to set both channels simultaneously.
|
|
*/
|
|
void dac_set_mode(uint32_t dac, uint32_t mode)
|
|
{
|
|
DAC_MCR(dac) |= mode;
|
|
}
|
|
|
|
/** @brief Check if DAC channel is ready to receive data.
|
|
|
|
@param[in] dac the base address of the DAC. @ref dac_reg_base
|
|
@param[in] channel with DAC mask. @ref dac_channel_id
|
|
*/
|
|
bool dac_is_ready(uint32_t dac, int channel)
|
|
{
|
|
uint32_t mask = 0;
|
|
if (channel & DAC_CHANNEL1) {
|
|
mask |= DAC_SR_DAC1RDY;
|
|
}
|
|
if (channel & DAC_CHANNEL2) {
|
|
mask |= DAC_SR_DAC2RDY;
|
|
}
|
|
|
|
return (DAC_SR(dac) & mask) != 0;
|
|
}
|
|
|
|
/** @brief Wait until DAC channel is ready to receive data.
|
|
|
|
@param[in] dac the base address of the DAC. @ref dac_reg_base
|
|
@param[in] channel with DAC mask. @ref dac_channel_id
|
|
*/
|
|
void dac_wait_on_ready(uint32_t dac, int channel)
|
|
{
|
|
while (!dac_is_ready(dac, channel));
|
|
}
|
|
|
|
/** @brief High frequency interface mode selection.
|
|
|
|
If the AHB frequency of the DAC is above 80MHz then this value needs setting
|
|
to an appropriate value.
|
|
|
|
@param[in] dac the base address of the DAC. @ref dac_reg_base
|
|
@param[in] hfsel uint32_t with appropriate HFSEL mask.
|
|
*/
|
|
void dac_set_high_frequency_mode(uint32_t dac, uint32_t hfsel)
|
|
{
|
|
uint32_t reg32 = DAC_MCR(dac);
|
|
reg32 &= ~(DAC_MCR_HFSEL_MASK << DAC_MCR_HFSEL_SHIFT);
|
|
reg32 |= hfsel;
|
|
DAC_MCR(dac) = reg32;
|
|
}
|
|
/**@}*/
|
|
|