From 1a441e5806c57518f419a39e065ccb4a85d22282 Mon Sep 17 00:00:00 2001 From: Arti Zirk Date: Thu, 30 Sep 2021 16:33:59 +0300 Subject: [PATCH] init --- .editorconfig | 9 + .gitignore | 2 + CMakeLists.txt | 38 + CMakePresets.json | 24 + README.md | 22 + RTT/CMakeLists.txt | 8 + RTT/SEGGER_RTT.c | 2073 +++++++++++++++++++++++++++++++++ RTT/SEGGER_RTT.h | 414 +++++++ RTT/SEGGER_RTT_Conf.h | 424 +++++++ RTT/SEGGER_RTT_Syscalls_GCC.c | 120 ++ RTT/SEGGER_RTT_printf.c | 500 ++++++++ generated.STM32F103C8T6.ld | 69 ++ openocd/ftdi.cfg | 37 + openocd/stlink.cfg | 21 + src/delay.h | 143 +++ src/main.c | 5 + src/util.c | 17 + src/util.h | 8 + toolchain-STM32F1.cmake | 42 + 19 files changed, 3976 insertions(+) create mode 100644 .editorconfig create mode 100644 .gitignore create mode 100644 CMakeLists.txt create mode 100644 CMakePresets.json create mode 100644 README.md create mode 100644 RTT/CMakeLists.txt create mode 100644 RTT/SEGGER_RTT.c create mode 100644 RTT/SEGGER_RTT.h create mode 100644 RTT/SEGGER_RTT_Conf.h create mode 100644 RTT/SEGGER_RTT_Syscalls_GCC.c create mode 100644 RTT/SEGGER_RTT_printf.c create mode 100644 generated.STM32F103C8T6.ld create mode 100644 openocd/ftdi.cfg create mode 100644 openocd/stlink.cfg create mode 100644 src/delay.h create mode 100644 src/main.c create mode 100644 src/util.c create mode 100644 src/util.h create mode 100644 toolchain-STM32F1.cmake diff --git a/.editorconfig b/.editorconfig new file mode 100644 index 0000000..4125abd --- /dev/null +++ b/.editorconfig @@ -0,0 +1,9 @@ +# top-most EditorConfig file +root = true + +[*] +end_of_line = lf +insert_final_newline = true +indent_style = space +indent_size = 4 + diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..a83bb87 --- /dev/null +++ b/.gitignore @@ -0,0 +1,2 @@ +build/ +.idea/ diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..a484dd0 --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,38 @@ +cmake_minimum_required(VERSION 3.19) +project(usbtest LANGUAGES C) + +set(LIBOPENCM3_DIR ${CMAKE_SOURCE_DIR}/libopencm3) +set(CMAKE_C_STANDARD 99) + +add_compile_options( + -Wall + -Wextra -Wshadow -Wno-unused-variable -Wimplicit-function-declaration + -Wredundant-decls -Wstrict-prototypes -Wmissing-prototypes + -ggdb3 + -O0 +) + +add_link_options( + +) + +add_compile_definitions( + STM32F1 + STM32F103C8T6 + DEBUG + TARGETS=stm32/f1 +) +add_executable(usbtest src/main.c src/util.c) + +set_target_properties(usbtest PROPERTIES SUFFIX .elf) + +#add_custom_target(libopencm3 make TARGETS=stm32/f1 -j8 WORKING_DIRECTORY ${LIBOPENCM3_DIR}) +#link_directories(${LIBOPENCM3_DIR}/lib) +#target_link_libraries(usbtest PUBLIC ${LIBOPENCM3_DIR}/lib/libopencm3_stm32f1.a) + +add_subdirectory(RTT) +target_link_libraries(usbtest PUBLIC RTT) + +target_include_directories(usbtest PUBLIC + RTT ${LIBOPENCM3_DIR}/include +) diff --git a/CMakePresets.json b/CMakePresets.json new file mode 100644 index 0000000..ac9e243 --- /dev/null +++ b/CMakePresets.json @@ -0,0 +1,24 @@ +{ + "version": 3, + "cmakeMinimumRequired": { + "major": 3, + "minor": 19, + "patch": 0 + }, + "configurePresets": [ + { + "name": "default", + "displayName": "Default Config", + "description": "Default build using Ninja generator", + "generator": "Ninja", + "binaryDir": "${sourceDir}/build", + "toolchainFile": "toolchain-STM32F1.cmake" + } + ], + "buildPresets": [ + { + "name": "default", + "configurePreset": "default" + } + ] +} diff --git a/README.md b/README.md new file mode 100644 index 0000000..540caf1 --- /dev/null +++ b/README.md @@ -0,0 +1,22 @@ +## Build + +First time: + +0. `git submodule update --init` +1. `make -C libopencm3` +2. `cmake -S . --preset=default` + +or older cmake: + +2. `cmake -S . -B build -DCMAKE_TOOLCHAIN_FILE=toolchain-STM32F1.cmake` + +And then to build an `.elf` + +0. `cmake --build build --verbose` + + +## RTT debug console + +run this while `openocd` is running + + while true; do if nc -z localhost 9090; then telnet localhost 9090; else sleep 1; fi; done diff --git a/RTT/CMakeLists.txt b/RTT/CMakeLists.txt new file mode 100644 index 0000000..950a085 --- /dev/null +++ b/RTT/CMakeLists.txt @@ -0,0 +1,8 @@ +add_library(RTT OBJECT + SEGGER_RTT.c + SEGGER_RTT_printf.c + SEGGER_RTT_Syscalls_GCC.c + ) +target_include_directories(RTT + INTERFACE ${CMAKE_CURRENT_SOURCE_DIR} + ) diff --git a/RTT/SEGGER_RTT.c b/RTT/SEGGER_RTT.c new file mode 100644 index 0000000..724dba9 --- /dev/null +++ b/RTT/SEGGER_RTT.c @@ -0,0 +1,2073 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT.c +Purpose : Implementation of SEGGER real-time transfer (RTT) which + allows real-time communication on targets which support + debugger memory accesses while the CPU is running. +Revision: $Rev: 22333 $ + +Additional information: + Type "int" is assumed to be 32-bits in size + H->T Host to target communication + T->H Target to host communication + + RTT channel 0 is always present and reserved for Terminal usage. + Name is fixed to "Terminal" + + Effective buffer size: SizeOfBuffer - 1 + + WrOff == RdOff: Buffer is empty + WrOff == (RdOff - 1): Buffer is full + WrOff > RdOff: Free space includes wrap-around + WrOff < RdOff: Used space includes wrap-around + (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): + Buffer full and wrap-around after next byte + + +---------------------------------------------------------------------- +*/ + +#include "SEGGER_RTT.h" + +#include // for memcpy + +/********************************************************************* +* +* Configuration, default values +* +********************************************************************** +*/ + +#if SEGGER_RTT_CPU_CACHE_LINE_SIZE + #ifdef SEGGER_RTT_CB_ALIGN + #error "Custom SEGGER_RTT_CB_ALIGN() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_BUFFER_ALIGN + #error "Custom SEGGER_RTT_BUFFER_ALIGN() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_PUT_CB_SECTION + #error "Custom SEGGER_RTT_PUT_CB_SECTION() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_PUT_BUFFER_SECTION + #error "Custom SEGGER_RTT_PUT_BUFFER_SECTION() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_BUFFER_ALIGNMENT + #error "Custom SEGGER_RTT_BUFFER_ALIGNMENT is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_ALIGNMENT + #error "Custom SEGGER_RTT_ALIGNMENT is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif +#endif + +#ifndef BUFFER_SIZE_UP + #define BUFFER_SIZE_UP 1024 // Size of the buffer for terminal output of target, up to host +#endif + +#ifndef BUFFER_SIZE_DOWN + #define BUFFER_SIZE_DOWN 16 // Size of the buffer for terminal input to target from host (Usually keyboard input) +#endif + +#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS + #define SEGGER_RTT_MAX_NUM_UP_BUFFERS 2 // Number of up-buffers (T->H) available on this target +#endif + +#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS + #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS 2 // Number of down-buffers (H->T) available on this target +#endif + +#ifndef SEGGER_RTT_BUFFER_SECTION + #if defined(SEGGER_RTT_SECTION) + #define SEGGER_RTT_BUFFER_SECTION SEGGER_RTT_SECTION + #endif +#endif + +#ifndef SEGGER_RTT_ALIGNMENT + #define SEGGER_RTT_ALIGNMENT SEGGER_RTT_CPU_CACHE_LINE_SIZE +#endif + +#ifndef SEGGER_RTT_BUFFER_ALIGNMENT + #define SEGGER_RTT_BUFFER_ALIGNMENT SEGGER_RTT_CPU_CACHE_LINE_SIZE +#endif + +#ifndef SEGGER_RTT_MODE_DEFAULT + #define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP +#endif + +#ifndef SEGGER_RTT_LOCK + #define SEGGER_RTT_LOCK() +#endif + +#ifndef SEGGER_RTT_UNLOCK + #define SEGGER_RTT_UNLOCK() +#endif + +#ifndef STRLEN + #define STRLEN(a) strlen((a)) +#endif + +#ifndef STRCPY + #define STRCPY(pDest, pSrc) strcpy((pDest), (pSrc)) +#endif + +#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP + #define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 +#endif + +#ifndef SEGGER_RTT_MEMCPY + #ifdef MEMCPY + #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) MEMCPY((pDest), (pSrc), (NumBytes)) + #else + #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) memcpy((pDest), (pSrc), (NumBytes)) + #endif +#endif + +#ifndef MIN + #define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#endif + +#ifndef MAX + #define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#endif +// +// For some environments, NULL may not be defined until certain headers are included +// +#ifndef NULL + #define NULL 0 +#endif + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ +#if (defined __ICCARM__) || (defined __ICCRX__) + #define RTT_PRAGMA(P) _Pragma(#P) +#endif + +#if SEGGER_RTT_ALIGNMENT || SEGGER_RTT_BUFFER_ALIGNMENT + #if (defined __GNUC__) + #define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment))) + #elif (defined __ICCARM__) || (defined __ICCRX__) + #define PRAGMA(A) _Pragma(#A) +#define SEGGER_RTT_ALIGN(Var, Alignment) RTT_PRAGMA(data_alignment=Alignment) \ + Var + #elif (defined __CC_ARM) + #define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment))) + #else + #error "Alignment not supported for this compiler." + #endif +#else + #define SEGGER_RTT_ALIGN(Var, Alignment) Var +#endif + +#if defined(SEGGER_RTT_SECTION) || defined (SEGGER_RTT_BUFFER_SECTION) + #if (defined __GNUC__) + #define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section))) Var + #elif (defined __ICCARM__) || (defined __ICCRX__) +#define SEGGER_RTT_PUT_SECTION(Var, Section) RTT_PRAGMA(location=Section) \ + Var + #elif (defined __CC_ARM) + #define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section), zero_init)) Var + #else + #error "Section placement not supported for this compiler." + #endif +#else + #define SEGGER_RTT_PUT_SECTION(Var, Section) Var +#endif + +#if SEGGER_RTT_ALIGNMENT + #define SEGGER_RTT_CB_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_ALIGNMENT) +#else + #define SEGGER_RTT_CB_ALIGN(Var) Var +#endif + +#if SEGGER_RTT_BUFFER_ALIGNMENT + #define SEGGER_RTT_BUFFER_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_BUFFER_ALIGNMENT) +#else + #define SEGGER_RTT_BUFFER_ALIGN(Var) Var +#endif + + +#if defined(SEGGER_RTT_SECTION) + #define SEGGER_RTT_PUT_CB_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_SECTION) +#else + #define SEGGER_RTT_PUT_CB_SECTION(Var) Var +#endif + +#if defined(SEGGER_RTT_BUFFER_SECTION) + #define SEGGER_RTT_PUT_BUFFER_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_BUFFER_SECTION) +#else + #define SEGGER_RTT_PUT_BUFFER_SECTION(Var) Var +#endif + +/********************************************************************* +* +* Static const data +* +********************************************************************** +*/ + +static unsigned char _aTerminalId[16] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; + +/********************************************************************* +* +* Static data +* +********************************************************************** +*/ + +// +// RTT Control Block and allocate buffers for channel 0 +// +SEGGER_RTT_PUT_CB_SECTION(SEGGER_RTT_CB_ALIGN(SEGGER_RTT_CB _SEGGER_RTT)); +SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acUpBuffer [SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(BUFFER_SIZE_UP)])); +SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acDownBuffer[SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(BUFFER_SIZE_DOWN)])); + +static unsigned char _ActiveTerminal; + +/********************************************************************* +* +* Static functions +* +********************************************************************** +*/ + +/********************************************************************* +* +* _DoInit() +* +* Function description +* Initializes the control block an buffers. +* May only be called via INIT() to avoid overriding settings. +* +*/ +#define INIT() { \ + volatile SEGGER_RTT_CB* pRTTCBInit; \ + pRTTCBInit = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); \ + do { \ + if (pRTTCBInit->acID[0] == '\0') { \ + _DoInit(); \ + } \ + } while (0); \ + } + +static void _DoInit(void) { + volatile SEGGER_RTT_CB* p; // Volatile to make sure that compiler cannot change the order of accesses to the control block + // + // Initialize control block + // + p = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access control block uncached so that nothing in the cache ever becomes dirty and all changes are visible in HW directly + p->MaxNumUpBuffers = SEGGER_RTT_MAX_NUM_UP_BUFFERS; + p->MaxNumDownBuffers = SEGGER_RTT_MAX_NUM_DOWN_BUFFERS; + // + // Initialize up buffer 0 + // + p->aUp[0].sName = "Terminal"; + p->aUp[0].pBuffer = _acUpBuffer; + p->aUp[0].SizeOfBuffer = BUFFER_SIZE_UP; + p->aUp[0].RdOff = 0u; + p->aUp[0].WrOff = 0u; + p->aUp[0].Flags = SEGGER_RTT_MODE_DEFAULT; + // + // Initialize down buffer 0 + // + p->aDown[0].sName = "Terminal"; + p->aDown[0].pBuffer = _acDownBuffer; + p->aDown[0].SizeOfBuffer = BUFFER_SIZE_DOWN; + p->aDown[0].RdOff = 0u; + p->aDown[0].WrOff = 0u; + p->aDown[0].Flags = SEGGER_RTT_MODE_DEFAULT; + // + // Finish initialization of the control block. + // Copy Id string in three steps to make sure "SEGGER RTT" is not found + // in initializer memory (usually flash) by J-Link + // + STRCPY((char*)&p->acID[7], "RTT"); + RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order + STRCPY((char*)&p->acID[0], "SEGGER"); + RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order + p->acID[6] = ' '; + RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order +} + +/********************************************************************* +* +* _WriteBlocking() +* +* Function description +* Stores a specified number of characters in SEGGER RTT ring buffer +* and updates the associated write pointer which is periodically +* read by the host. +* The caller is responsible for managing the write chunk sizes as +* _WriteBlocking() will block until all data has been posted successfully. +* +* Parameters +* pRing Ring buffer to post to. +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* >= 0 - Number of bytes written into buffer. +*/ +static unsigned _WriteBlocking(SEGGER_RTT_BUFFER_UP* pRing, const char* pBuffer, unsigned NumBytes) { + unsigned NumBytesToWrite; + unsigned NumBytesWritten; + unsigned RdOff; + unsigned WrOff; + volatile char* pDst; + // + // Write data to buffer and handle wrap-around if necessary + // + NumBytesWritten = 0u; + WrOff = pRing->WrOff; + do { + RdOff = pRing->RdOff; // May be changed by host (debug probe) in the meantime + if (RdOff > WrOff) { + NumBytesToWrite = RdOff - WrOff - 1u; + } else { + NumBytesToWrite = pRing->SizeOfBuffer - (WrOff - RdOff + 1u); + } + NumBytesToWrite = MIN(NumBytesToWrite, (pRing->SizeOfBuffer - WrOff)); // Number of bytes that can be written until buffer wrap-around + NumBytesToWrite = MIN(NumBytesToWrite, NumBytes); + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesWritten += NumBytesToWrite; + NumBytes -= NumBytesToWrite; + WrOff += NumBytesToWrite; + while (NumBytesToWrite--) { + *pDst++ = *pBuffer++; + }; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pBuffer, NumBytesToWrite); + NumBytesWritten += NumBytesToWrite; + pBuffer += NumBytesToWrite; + NumBytes -= NumBytesToWrite; + WrOff += NumBytesToWrite; +#endif + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0u; + } + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + } while (NumBytes); + return NumBytesWritten; +} + +/********************************************************************* +* +* _WriteNoCheck() +* +* Function description +* Stores a specified number of characters in SEGGER RTT ring buffer +* and updates the associated write pointer which is periodically +* read by the host. +* It is callers responsibility to make sure data actually fits in buffer. +* +* Parameters +* pRing Ring buffer to post to. +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Notes +* (1) If there might not be enough space in the "Up"-buffer, call _WriteBlocking +*/ +static void _WriteNoCheck(SEGGER_RTT_BUFFER_UP* pRing, const char* pData, unsigned NumBytes) { + unsigned NumBytesAtOnce; + unsigned WrOff; + unsigned Rem; + volatile char* pDst; + + WrOff = pRing->WrOff; + Rem = pRing->SizeOfBuffer - WrOff; + if (Rem > NumBytes) { + // + // All data fits before wrap around + // + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + WrOff += NumBytes; + while (NumBytes--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytes); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff + NumBytes; +#endif + } else { + // + // We reach the end of the buffer, so need to wrap around + // +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + NumBytesAtOnce = Rem; + while (NumBytesAtOnce--) { + *pDst++ = *pData++; + }; + pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; + NumBytesAtOnce = NumBytes - Rem; + while (NumBytesAtOnce--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = NumBytes - Rem; +#else + NumBytesAtOnce = Rem; + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytesAtOnce); + NumBytesAtOnce = NumBytes - Rem; + pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; + SEGGER_RTT_MEMCPY((void*)pDst, pData + Rem, NumBytesAtOnce); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = NumBytesAtOnce; +#endif + } +} + +/********************************************************************* +* +* _PostTerminalSwitch() +* +* Function description +* Switch terminal to the given terminal ID. It is the caller's +* responsibility to ensure the terminal ID is correct and there is +* enough space in the buffer for this to complete successfully. +* +* Parameters +* pRing Ring buffer to post to. +* TerminalId Terminal ID to switch to. +*/ +static void _PostTerminalSwitch(SEGGER_RTT_BUFFER_UP* pRing, unsigned char TerminalId) { + unsigned char ac[2]; + + ac[0] = 0xFFu; + ac[1] = _aTerminalId[TerminalId]; // Caller made already sure that TerminalId does not exceed our terminal limit + _WriteBlocking(pRing, (const char*)ac, 2u); +} + +/********************************************************************* +* +* _GetAvailWriteSpace() +* +* Function description +* Returns the number of bytes that can be written to the ring +* buffer without blocking. +* +* Parameters +* pRing Ring buffer to check. +* +* Return value +* Number of bytes that are free in the buffer. +*/ +static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) { + unsigned RdOff; + unsigned WrOff; + unsigned r; + // + // Avoid warnings regarding volatile access order. It's not a problem + // in this case, but dampen compiler enthusiasm. + // + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + if (RdOff <= WrOff) { + r = pRing->SizeOfBuffer - 1u - WrOff + RdOff; + } else { + r = RdOff - WrOff - 1u; + } + return r; +} + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ + +/********************************************************************* +* +* SEGGER_RTT_ReadUpBufferNoLock() +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the application. +* Do not lock against interrupts and multiple access. +* Used to do the same operation that J-Link does, to transfer +* RTT data via other channels, such as TCP/IP or UART. +* +* Parameters +* BufferIndex Index of Up-buffer to be used. +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-up-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +*/ +unsigned SEGGER_RTT_ReadUpBufferNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) { + unsigned NumBytesRem; + unsigned NumBytesRead; + unsigned RdOff; + unsigned WrOff; + unsigned char* pBuffer; + SEGGER_RTT_BUFFER_UP* pRing; + volatile char* pSrc; + + INIT(); + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pBuffer = (unsigned char*)pData; + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + NumBytesRead = 0u; + // + // Read from current read position to wrap-around of buffer, first + // + if (RdOff > WrOff) { + NumBytesRem = pRing->SizeOfBuffer - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + // + // Handle wrap-around of buffer + // + if (RdOff == pRing->SizeOfBuffer) { + RdOff = 0u; + } + } + // + // Read remaining items of buffer + // + NumBytesRem = WrOff - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + if (NumBytesRem > 0u) { + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + } + // + // Update read offset of buffer + // + if (NumBytesRead) { + pRing->RdOff = RdOff; + } + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_ReadNoLock() +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the host. +* Do not lock against interrupts and multiple access. +* +* Parameters +* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +*/ +unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) { + unsigned NumBytesRem; + unsigned NumBytesRead; + unsigned RdOff; + unsigned WrOff; + unsigned char* pBuffer; + SEGGER_RTT_BUFFER_DOWN* pRing; + volatile char* pSrc; + // + INIT(); + pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pBuffer = (unsigned char*)pData; + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + NumBytesRead = 0u; + // + // Read from current read position to wrap-around of buffer, first + // + if (RdOff > WrOff) { + NumBytesRem = pRing->SizeOfBuffer - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + // + // Handle wrap-around of buffer + // + if (RdOff == pRing->SizeOfBuffer) { + RdOff = 0u; + } + } + // + // Read remaining items of buffer + // + NumBytesRem = WrOff - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + if (NumBytesRem > 0u) { + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + } + if (NumBytesRead) { + pRing->RdOff = RdOff; + } + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_ReadUpBuffer +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the application. +* Used to do the same operation that J-Link does, to transfer +* RTT data via other channels, such as TCP/IP or UART. +* +* Parameters +* BufferIndex Index of Up-buffer to be used. +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-up-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +* This function locks against all other RTT operations. I.e. during +* the read operation, writing is also locked. +* If only one consumer reads from the up buffer, +* call sEGGER_RTT_ReadUpBufferNoLock() instead. +*/ +unsigned SEGGER_RTT_ReadUpBuffer(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { + unsigned NumBytesRead; + + SEGGER_RTT_LOCK(); + // + // Call the non-locking read function + // + NumBytesRead = SEGGER_RTT_ReadUpBufferNoLock(BufferIndex, pBuffer, BufferSize); + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_Read +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the host. +* +* Parameters +* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +*/ +unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { + unsigned NumBytesRead; + + SEGGER_RTT_LOCK(); + // + // Call the non-locking read function + // + NumBytesRead = SEGGER_RTT_ReadNoLock(BufferIndex, pBuffer, BufferSize); + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteWithOverwriteNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block. +* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application +* and overwrites data if the data does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, data is overwritten. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link +* connection reads RTT data. +*/ +void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + unsigned Avail; + volatile char* pDst; + // + // Get "to-host" ring buffer and copy some elements into local variables. + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Check if we will overwrite data and need to adjust the RdOff. + // + if (pRing->WrOff == pRing->RdOff) { + Avail = pRing->SizeOfBuffer - 1u; + } else if ( pRing->WrOff < pRing->RdOff) { + Avail = pRing->RdOff - pRing->WrOff - 1u; + } else { + Avail = pRing->RdOff - pRing->WrOff - 1u + pRing->SizeOfBuffer; + } + if (NumBytes > Avail) { + pRing->RdOff += (NumBytes - Avail); + while (pRing->RdOff >= pRing->SizeOfBuffer) { + pRing->RdOff -= pRing->SizeOfBuffer; + } + } + // + // Write all data, no need to check the RdOff, but possibly handle multiple wrap-arounds + // + Avail = pRing->SizeOfBuffer - pRing->WrOff; + do { + if (Avail > NumBytes) { + // + // Last round + // + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + Avail = NumBytes; + while (NumBytes--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff += Avail; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytes); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff += NumBytes; +#endif + break; + } else { + // + // Wrap-around necessary, write until wrap-around and reset WrOff + // + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytes -= Avail; + while (Avail--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = 0; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pData, Avail); + pData += Avail; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = 0; + NumBytes -= Avail; +#endif + Avail = (pRing->SizeOfBuffer - 1); + } + } while (NumBytes); +} + +/********************************************************************* +* +* SEGGER_RTT_WriteSkipNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* SEGGER_RTT_WriteSkipNoLock does not lock the application and +* skips all data, if the data does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* MUST be > 0!!! +* This is done for performance reasons, so no initial check has do be done. +* +* Return value +* 1: Data has been copied +* 0: No space, data has not been copied +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, all data is dropped. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ +#if (RTT_USE_ASM == 0) +unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + unsigned Avail; + unsigned RdOff; + unsigned WrOff; + unsigned Rem; + volatile char* pDst; + // + // Cases: + // 1) RdOff <= WrOff => Space until wrap-around is sufficient + // 2) RdOff <= WrOff => Space after wrap-around needed (copy in 2 chunks) + // 3) RdOff < WrOff => No space in buf + // 4) RdOff > WrOff => Space is sufficient + // 5) RdOff > WrOff => No space in buf + // + // 1) is the most common case for large buffers and assuming that J-Link reads the data fast enough + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + if (RdOff <= WrOff) { // Case 1), 2) or 3) + Avail = pRing->SizeOfBuffer - WrOff - 1u; // Space until wrap-around (assume 1 byte not usable for case that RdOff == 0) + if (Avail >= NumBytes) { // Case 1)? +CopyStraight: + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + memcpy((void*)pDst, pData, NumBytes); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff + NumBytes; + return 1; + } + Avail += RdOff; // Space incl. wrap-around + if (Avail >= NumBytes) { // Case 2? => If not, we have case 3) (does not fit) + Rem = pRing->SizeOfBuffer - WrOff; // Space until end of buffer + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + memcpy((void*)pDst, pData, Rem); // Copy 1st chunk + NumBytes -= Rem; + // + // Special case: First check that assumed RdOff == 0 calculated that last element before wrap-around could not be used + // But 2nd check (considering space until wrap-around and until RdOff) revealed that RdOff is not 0, so we can use the last element + // In this case, we may use a copy straight until buffer end anyway without needing to copy 2 chunks + // Therefore, check if 2nd memcpy is necessary at all + // + if (NumBytes) { + pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; + memcpy((void*)pDst, pData + Rem, NumBytes); + } + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = NumBytes; + return 1; + } + } else { // Potential case 4) + Avail = RdOff - WrOff - 1u; + if (Avail >= NumBytes) { // Case 4)? => If not, we have case 5) (does not fit) + goto CopyStraight; + } + } + return 0; // No space in buffer +} +#endif + +/********************************************************************* +* +* SEGGER_RTT_WriteDownBufferNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block inside a buffer. +* SEGGER_RTT_WriteDownBufferNoLock does not lock the application. +* Used to do the same operation that J-Link does, to transfer +* RTT data from other channels, such as TCP/IP or UART. +* +* Parameters +* BufferIndex Index of "Down"-buffer to be used. +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Down"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +*/ +unsigned SEGGER_RTT_WriteDownBufferNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + unsigned Avail; + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + // + // Get "to-target" ring buffer. + // It is save to cast that to a "to-host" buffer. Up and Down buffer differ in volatility of offsets that might be modified by J-Link. + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // How we output depends upon the mode... + // + switch (pRing->Flags) { + case SEGGER_RTT_MODE_NO_BLOCK_SKIP: + // + // If we are in skip mode and there is no space for the whole + // of this output, don't bother. + // + Avail = _GetAvailWriteSpace(pRing); + if (Avail < NumBytes) { + Status = 0u; + } else { + Status = NumBytes; + _WriteNoCheck(pRing, pData, NumBytes); + } + break; + case SEGGER_RTT_MODE_NO_BLOCK_TRIM: + // + // If we are in trim mode, trim to what we can output without blocking. + // + Avail = _GetAvailWriteSpace(pRing); + Status = Avail < NumBytes ? Avail : NumBytes; + _WriteNoCheck(pRing, pData, Status); + break; + case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: + // + // If we are in blocking mode, output everything. + // + Status = _WriteBlocking(pRing, pData, NumBytes); + break; + default: + Status = 0u; + break; + } + // + // Finish up. + // + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* SEGGER_RTT_WriteNoLock does not lock the application. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ +unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + unsigned Avail; + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + // + // Get "to-host" ring buffer. + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // How we output depends upon the mode... + // + switch (pRing->Flags) { + case SEGGER_RTT_MODE_NO_BLOCK_SKIP: + // + // If we are in skip mode and there is no space for the whole + // of this output, don't bother. + // + Avail = _GetAvailWriteSpace(pRing); + if (Avail < NumBytes) { + Status = 0u; + } else { + Status = NumBytes; + _WriteNoCheck(pRing, pData, NumBytes); + } + break; + case SEGGER_RTT_MODE_NO_BLOCK_TRIM: + // + // If we are in trim mode, trim to what we can output without blocking. + // + Avail = _GetAvailWriteSpace(pRing); + Status = Avail < NumBytes ? Avail : NumBytes; + _WriteNoCheck(pRing, pData, Status); + break; + case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: + // + // If we are in blocking mode, output everything. + // + Status = _WriteBlocking(pRing, pData, NumBytes); + break; + default: + Status = 0u; + break; + } + // + // Finish up. + // + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteDownBuffer +* +* Function description +* Stores a specified number of characters in SEGGER RTT control block in a buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Down"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +* This function locks against all other RTT operations. I.e. during +* the write operation, writing from the application is also locked. +* If only one consumer writes to the down buffer, +* call SEGGER_RTT_WriteDownBufferNoLock() instead. +*/ +unsigned SEGGER_RTT_WriteDownBuffer(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + + INIT(); + SEGGER_RTT_LOCK(); + Status = SEGGER_RTT_WriteDownBufferNoLock(BufferIndex, pBuffer, NumBytes); // Call the non-locking write function + SEGGER_RTT_UNLOCK(); + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_Write +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +*/ +unsigned SEGGER_RTT_Write(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + + INIT(); + SEGGER_RTT_LOCK(); + Status = SEGGER_RTT_WriteNoLock(BufferIndex, pBuffer, NumBytes); // Call the non-locking write function + SEGGER_RTT_UNLOCK(); + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteString +* +* Function description +* Stores string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* s Pointer to string. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* (2) String passed to this function has to be \0 terminated +* (3) \0 termination character is *not* stored in RTT buffer +*/ +unsigned SEGGER_RTT_WriteString(unsigned BufferIndex, const char* s) { + unsigned Len; + + Len = STRLEN(s); + return SEGGER_RTT_Write(BufferIndex, s, Len); +} + +/********************************************************************* +* +* SEGGER_RTT_PutCharSkipNoLock +* +* Function description +* Stores a single character/byte in SEGGER RTT buffer. +* SEGGER_RTT_PutCharSkipNoLock does not lock the application and +* skips the byte, if it does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* c Byte to be stored. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, the character is dropped. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ + +unsigned SEGGER_RTT_PutCharSkipNoLock(unsigned BufferIndex, char c) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned WrOff; + unsigned Status; + volatile char* pDst; + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Get write position and handle wrap-around if necessary + // + WrOff = pRing->WrOff + 1; + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0; + } + // + // Output byte if free space is available + // + if (WrOff != pRing->RdOff) { + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; + *pDst = c; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + Status = 1; + } else { + Status = 0; + } + // + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_PutCharSkip +* +* Function description +* Stores a single character/byte in SEGGER RTT buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* c Byte to be stored. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, the character is dropped. +*/ + +unsigned SEGGER_RTT_PutCharSkip(unsigned BufferIndex, char c) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned WrOff; + unsigned Status; + volatile char* pDst; + // + // Prepare + // + INIT(); + SEGGER_RTT_LOCK(); + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Get write position and handle wrap-around if necessary + // + WrOff = pRing->WrOff + 1; + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0; + } + // + // Output byte if free space is available + // + if (WrOff != pRing->RdOff) { + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; + *pDst = c; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + Status = 1; + } else { + Status = 0; + } + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + // + return Status; +} + + /********************************************************************* +* +* SEGGER_RTT_PutChar +* +* Function description +* Stores a single character/byte in SEGGER RTT buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* c Byte to be stored. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +*/ + +unsigned SEGGER_RTT_PutChar(unsigned BufferIndex, char c) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned WrOff; + unsigned Status; + volatile char* pDst; + // + // Prepare + // + INIT(); + SEGGER_RTT_LOCK(); + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Get write position and handle wrap-around if necessary + // + WrOff = pRing->WrOff + 1; + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0; + } + // + // Wait for free space if mode is set to blocking + // + if (pRing->Flags == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { + while (WrOff == pRing->RdOff) { + ; + } + } + // + // Output byte if free space is available + // + if (WrOff != pRing->RdOff) { + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; + *pDst = c; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + Status = 1; + } else { + Status = 0; + } + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_GetKey +* +* Function description +* Reads one character from the SEGGER RTT buffer. +* Host has previously stored data there. +* +* Return value +* < 0 - No character available (buffer empty). +* >= 0 - Character which has been read. (Possible values: 0 - 255) +* +* Notes +* (1) This function is only specified for accesses to RTT buffer 0. +*/ +int SEGGER_RTT_GetKey(void) { + char c; + int r; + + r = (int)SEGGER_RTT_Read(0u, &c, 1u); + if (r == 1) { + r = (int)(unsigned char)c; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_WaitKey +* +* Function description +* Waits until at least one character is avaible in the SEGGER RTT buffer. +* Once a character is available, it is read and this function returns. +* +* Return value +* >=0 - Character which has been read. +* +* Notes +* (1) This function is only specified for accesses to RTT buffer 0 +* (2) This function is blocking if no character is present in RTT buffer +*/ +int SEGGER_RTT_WaitKey(void) { + int r; + + do { + r = SEGGER_RTT_GetKey(); + } while (r < 0); + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_HasKey +* +* Function description +* Checks if at least one character for reading is available in the SEGGER RTT buffer. +* +* Return value +* == 0 - No characters are available to read. +* == 1 - At least one character is available. +* +* Notes +* (1) This function is only specified for accesses to RTT buffer 0 +*/ +int SEGGER_RTT_HasKey(void) { + SEGGER_RTT_BUFFER_DOWN* pRing; + unsigned RdOff; + int r; + + INIT(); + pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + RdOff = pRing->RdOff; + if (RdOff != pRing->WrOff) { + r = 1; + } else { + r = 0; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_HasData +* +* Function description +* Check if there is data from the host in the given buffer. +* +* Return value: +* ==0: No data +* !=0: Data in buffer +* +*/ +unsigned SEGGER_RTT_HasData(unsigned BufferIndex) { + SEGGER_RTT_BUFFER_DOWN* pRing; + unsigned v; + + pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + v = pRing->WrOff; + return v - pRing->RdOff; +} + +/********************************************************************* +* +* SEGGER_RTT_HasDataUp +* +* Function description +* Check if there is data remaining to be sent in the given buffer. +* +* Return value: +* ==0: No data +* !=0: Data in buffer +* +*/ +unsigned SEGGER_RTT_HasDataUp(unsigned BufferIndex) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned v; + + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + v = pRing->RdOff; + return pRing->WrOff - v; +} + +/********************************************************************* +* +* SEGGER_RTT_AllocDownBuffer +* +* Function description +* Run-time configuration of the next down-buffer (H->T). +* The next buffer, which is not used yet is configured. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 - O.K. Buffer Index +* < 0 - Error +*/ +int SEGGER_RTT_AllocDownBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int BufferIndex; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + SEGGER_RTT_LOCK(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + BufferIndex = 0; + do { + if (pRTTCB->aDown[BufferIndex].pBuffer == NULL) { + break; + } + BufferIndex++; + } while (BufferIndex < pRTTCB->MaxNumDownBuffers); + if (BufferIndex < pRTTCB->MaxNumDownBuffers) { + pRTTCB->aDown[BufferIndex].sName = sName; + pRTTCB->aDown[BufferIndex].pBuffer = (char*)pBuffer; + pRTTCB->aDown[BufferIndex].SizeOfBuffer = BufferSize; + pRTTCB->aDown[BufferIndex].RdOff = 0u; + pRTTCB->aDown[BufferIndex].WrOff = 0u; + pRTTCB->aDown[BufferIndex].Flags = Flags; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + } else { + BufferIndex = -1; + } + SEGGER_RTT_UNLOCK(); + return BufferIndex; +} + +/********************************************************************* +* +* SEGGER_RTT_AllocUpBuffer +* +* Function description +* Run-time configuration of the next up-buffer (T->H). +* The next buffer, which is not used yet is configured. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 - O.K. Buffer Index +* < 0 - Error +*/ +int SEGGER_RTT_AllocUpBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int BufferIndex; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + SEGGER_RTT_LOCK(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + BufferIndex = 0; + do { + if (pRTTCB->aUp[BufferIndex].pBuffer == NULL) { + break; + } + BufferIndex++; + } while (BufferIndex < pRTTCB->MaxNumUpBuffers); + if (BufferIndex < pRTTCB->MaxNumUpBuffers) { + pRTTCB->aUp[BufferIndex].sName = sName; + pRTTCB->aUp[BufferIndex].pBuffer = (char*)pBuffer; + pRTTCB->aUp[BufferIndex].SizeOfBuffer = BufferSize; + pRTTCB->aUp[BufferIndex].RdOff = 0u; + pRTTCB->aUp[BufferIndex].WrOff = 0u; + pRTTCB->aUp[BufferIndex].Flags = Flags; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + } else { + BufferIndex = -1; + } + SEGGER_RTT_UNLOCK(); + return BufferIndex; +} + +/********************************************************************* +* +* SEGGER_RTT_ConfigUpBuffer +* +* Function description +* Run-time configuration of a specific up-buffer (T->H). +* Buffer to be configured is specified by index. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* BufferIndex Index of the buffer to configure. +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 - O.K. +* < 0 - Error +* +* Additional information +* Buffer 0 is configured on compile-time. +* May only be called once per buffer. +* Buffer name and flags can be reconfigured using the appropriate functions. +*/ +int SEGGER_RTT_ConfigUpBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + volatile SEGGER_RTT_BUFFER_UP* pUp; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < SEGGER_RTT_MAX_NUM_UP_BUFFERS) { + SEGGER_RTT_LOCK(); + pUp = &pRTTCB->aUp[BufferIndex]; + if (BufferIndex) { + pUp->sName = sName; + pUp->pBuffer = (char*)pBuffer; + pUp->SizeOfBuffer = BufferSize; + pUp->RdOff = 0u; + pUp->WrOff = 0u; + } + pUp->Flags = Flags; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_ConfigDownBuffer +* +* Function description +* Run-time configuration of a specific down-buffer (H->T). +* Buffer to be configured is specified by index. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* BufferIndex Index of the buffer to configure. +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 O.K. +* < 0 Error +* +* Additional information +* Buffer 0 is configured on compile-time. +* May only be called once per buffer. +* Buffer name and flags can be reconfigured using the appropriate functions. +*/ +int SEGGER_RTT_ConfigDownBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + volatile SEGGER_RTT_BUFFER_DOWN* pDown; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < SEGGER_RTT_MAX_NUM_DOWN_BUFFERS) { + SEGGER_RTT_LOCK(); + pDown = &pRTTCB->aDown[BufferIndex]; + if (BufferIndex) { + pDown->sName = sName; + pDown->pBuffer = (char*)pBuffer; + pDown->SizeOfBuffer = BufferSize; + pDown->RdOff = 0u; + pDown->WrOff = 0u; + } + pDown->Flags = Flags; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetNameUpBuffer +* +* Function description +* Run-time configuration of a specific up-buffer name (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer to renamed. +* sName Pointer to a constant name string. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetNameUpBuffer(unsigned BufferIndex, const char* sName) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + volatile SEGGER_RTT_BUFFER_UP* pUp; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < SEGGER_RTT_MAX_NUM_UP_BUFFERS) { + SEGGER_RTT_LOCK(); + pUp = &pRTTCB->aUp[BufferIndex]; + pUp->sName = sName; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetNameDownBuffer +* +* Function description +* Run-time configuration of a specific Down-buffer name (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer to renamed. +* sName Pointer to a constant name string. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetNameDownBuffer(unsigned BufferIndex, const char* sName) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + volatile SEGGER_RTT_BUFFER_DOWN* pDown; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < SEGGER_RTT_MAX_NUM_DOWN_BUFFERS) { + SEGGER_RTT_LOCK(); + pDown = &pRTTCB->aDown[BufferIndex]; + pDown->sName = sName; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetFlagsUpBuffer +* +* Function description +* Run-time configuration of specific up-buffer flags (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer. +* Flags Flags to set for the buffer. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetFlagsUpBuffer(unsigned BufferIndex, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + volatile SEGGER_RTT_BUFFER_UP* pUp; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < SEGGER_RTT_MAX_NUM_UP_BUFFERS) { + SEGGER_RTT_LOCK(); + pUp = &pRTTCB->aUp[BufferIndex]; + pUp->Flags = Flags; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetFlagsDownBuffer +* +* Function description +* Run-time configuration of specific Down-buffer flags (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer to renamed. +* Flags Flags to set for the buffer. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetFlagsDownBuffer(unsigned BufferIndex, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + volatile SEGGER_RTT_BUFFER_DOWN* pDown; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < SEGGER_RTT_MAX_NUM_DOWN_BUFFERS) { + SEGGER_RTT_LOCK(); + pDown = &pRTTCB->aDown[BufferIndex]; + pDown->Flags = Flags; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_Init +* +* Function description +* Initializes the RTT Control Block. +* Should be used in RAM targets, at start of the application. +* +*/ +void SEGGER_RTT_Init (void) { + _DoInit(); +} + +/********************************************************************* +* +* SEGGER_RTT_SetTerminal +* +* Function description +* Sets the terminal to be used for output on channel 0. +* +* Parameters +* TerminalId Index of the terminal. +* +* Return value +* >= 0 O.K. +* < 0 Error (e.g. if RTT is configured for non-blocking mode and there was no space in the buffer to set the new terminal Id) +* +* Notes +* (1) Buffer 0 is always reserved for terminal I/O, so we can use index 0 here, fixed +*/ +int SEGGER_RTT_SetTerminal (unsigned char TerminalId) { + unsigned char ac[2]; + SEGGER_RTT_BUFFER_UP* pRing; + unsigned Avail; + int r; + + INIT(); + r = 0; + ac[0] = 0xFFu; + if (TerminalId < sizeof(_aTerminalId)) { // We only support a certain number of channels + ac[1] = _aTerminalId[TerminalId]; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + SEGGER_RTT_LOCK(); // Lock to make sure that no other task is writing into buffer, while we are and number of free bytes in buffer does not change downwards after checking and before writing + if ((pRing->Flags & SEGGER_RTT_MODE_MASK) == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { + _ActiveTerminal = TerminalId; + _WriteBlocking(pRing, (const char*)ac, 2u); + } else { // Skipping mode or trim mode? => We cannot trim this command so handling is the same for both modes + Avail = _GetAvailWriteSpace(pRing); + if (Avail >= 2) { + _ActiveTerminal = TerminalId; // Only change active terminal in case of success + _WriteNoCheck(pRing, (const char*)ac, 2u); + } else { + r = -1; + } + } + SEGGER_RTT_UNLOCK(); + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_TerminalOut +* +* Function description +* Writes a string to the given terminal +* without changing the terminal for channel 0. +* +* Parameters +* TerminalId Index of the terminal. +* s String to be printed on the terminal. +* +* Return value +* >= 0 - Number of bytes written. +* < 0 - Error. +* +*/ +int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s) { + int Status; + unsigned FragLen; + unsigned Avail; + SEGGER_RTT_BUFFER_UP* pRing; + // + INIT(); + // + // Validate terminal ID. + // + if (TerminalId < (char)sizeof(_aTerminalId)) { // We only support a certain number of channels + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Need to be able to change terminal, write data, change back. + // Compute the fixed and variable sizes. + // + FragLen = STRLEN(s); + // + // How we output depends upon the mode... + // + SEGGER_RTT_LOCK(); + Avail = _GetAvailWriteSpace(pRing); + switch (pRing->Flags & SEGGER_RTT_MODE_MASK) { + case SEGGER_RTT_MODE_NO_BLOCK_SKIP: + // + // If we are in skip mode and there is no space for the whole + // of this output, don't bother switching terminals at all. + // + if (Avail < (FragLen + 4u)) { + Status = 0; + } else { + _PostTerminalSwitch(pRing, TerminalId); + Status = (int)_WriteBlocking(pRing, s, FragLen); + _PostTerminalSwitch(pRing, _ActiveTerminal); + } + break; + case SEGGER_RTT_MODE_NO_BLOCK_TRIM: + // + // If we are in trim mode and there is not enough space for everything, + // trim the output but always include the terminal switch. If no room + // for terminal switch, skip that totally. + // + if (Avail < 4u) { + Status = -1; + } else { + _PostTerminalSwitch(pRing, TerminalId); + Status = (int)_WriteBlocking(pRing, s, (FragLen < (Avail - 4u)) ? FragLen : (Avail - 4u)); + _PostTerminalSwitch(pRing, _ActiveTerminal); + } + break; + case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: + // + // If we are in blocking mode, output everything. + // + _PostTerminalSwitch(pRing, TerminalId); + Status = (int)_WriteBlocking(pRing, s, FragLen); + _PostTerminalSwitch(pRing, _ActiveTerminal); + break; + default: + Status = -1; + break; + } + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + } else { + Status = -1; + } + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_GetAvailWriteSpace +* +* Function description +* Returns the number of bytes available in the ring buffer. +* +* Parameters +* BufferIndex Index of the up buffer. +* +* Return value +* Number of bytes that are free in the selected up buffer. +*/ +unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex) { + SEGGER_RTT_BUFFER_UP* pRing; + + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + return _GetAvailWriteSpace(pRing); +} + + +/********************************************************************* +* +* SEGGER_RTT_GetBytesInBuffer() +* +* Function description +* Returns the number of bytes currently used in the up buffer. +* +* Parameters +* BufferIndex Index of the up buffer. +* +* Return value +* Number of bytes that are used in the buffer. +*/ +unsigned SEGGER_RTT_GetBytesInBuffer(unsigned BufferIndex) { + unsigned RdOff; + unsigned WrOff; + unsigned r; + volatile SEGGER_RTT_CB* pRTTCB; + // + // Avoid warnings regarding volatile access order. It's not a problem + // in this case, but dampen compiler enthusiasm. + // + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + RdOff = pRTTCB->aUp[BufferIndex].RdOff; + WrOff = pRTTCB->aUp[BufferIndex].WrOff; + if (RdOff <= WrOff) { + r = WrOff - RdOff; + } else { + r = pRTTCB->aUp[BufferIndex].SizeOfBuffer - (WrOff - RdOff); + } + return r; +} + +/*************************** End of file ****************************/ diff --git a/RTT/SEGGER_RTT.h b/RTT/SEGGER_RTT.h new file mode 100644 index 0000000..396900a --- /dev/null +++ b/RTT/SEGGER_RTT.h @@ -0,0 +1,414 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT.h +Purpose : Implementation of SEGGER real-time transfer which allows + real-time communication on targets which support debugger + memory accesses while the CPU is running. +Revision: $Rev: 20869 $ +---------------------------------------------------------------------- +*/ + +#ifndef SEGGER_RTT_H +#define SEGGER_RTT_H + +#include "SEGGER_RTT_Conf.h" + +/********************************************************************* +* +* Defines, defaults +* +********************************************************************** +*/ +#ifndef RTT_USE_ASM + #if (defined __SES_ARM) // SEGGER Embedded Studio + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __CROSSWORKS_ARM) // Rowley Crossworks + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __ARMCC_VERSION) // ARM compiler + #if (__ARMCC_VERSION >= 6000000) // ARM compiler V6.0 and later is clang based + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #else + #define _CC_HAS_RTT_ASM_SUPPORT 0 + #endif + #elif (defined __GNUC__) // GCC + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __clang__) // Clang compiler + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif ((defined __IASMARM__) || (defined __ICCARM__)) // IAR assembler/compiler + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #else + #define _CC_HAS_RTT_ASM_SUPPORT 0 + #endif + #if ((defined __IASMARM__) || (defined __ICCARM__)) // IAR assembler/compiler + // + // IAR assembler / compiler + // + #if (__VER__ < 6300000) + #define VOLATILE + #else + #define VOLATILE volatile + #endif + #if (defined __ARM7M__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM7M__) // Cortex-M3 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #endif + #endif + #if (defined __ARM7EM__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM7EM__) // Cortex-M4/M7 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() asm VOLATILE ("DMB"); + #endif + #endif + #if (defined __ARM8M_BASELINE__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM8M_BASELINE__) // Cortex-M23 + #define _CORE_HAS_RTT_ASM_SUPPORT 0 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() asm VOLATILE ("DMB"); + #endif + #endif + #if (defined __ARM8M_MAINLINE__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM8M_MAINLINE__) // Cortex-M33 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() asm VOLATILE ("DMB"); + #endif + #endif + #else + // + // GCC / Clang + // + #if (defined __ARM_ARCH_7M__) // Cortex-M3 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __ARM_ARCH_7EM__) // Cortex-M4/M7 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined __ARM_ARCH_8M_BASE__) // Cortex-M23 + #define _CORE_HAS_RTT_ASM_SUPPORT 0 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined __ARM_ARCH_8M_MAIN__) // Cortex-M33 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #else + #define _CORE_HAS_RTT_ASM_SUPPORT 0 + #endif + #endif + // + // If IDE and core support the ASM version, enable ASM version by default + // + #ifndef _CORE_HAS_RTT_ASM_SUPPORT + #define _CORE_HAS_RTT_ASM_SUPPORT 0 // Default for unknown cores + #endif + #if (_CC_HAS_RTT_ASM_SUPPORT && _CORE_HAS_RTT_ASM_SUPPORT) + #define RTT_USE_ASM (1) + #else + #define RTT_USE_ASM (0) + #endif +#endif + +// +// We need to know if a DMB is needed to make sure that on Cortex-M7 etc. +// the order of accesses to the ring buffers is guaranteed +// Needed for: Cortex-M7, Cortex-M23, Cortex-M33 +// +#ifndef _CORE_NEEDS_DMB + #define _CORE_NEEDS_DMB 0 +#endif + +#ifndef RTT__DMB + #if _CORE_NEEDS_DMB + #error "Don't know how to place inline assembly for DMB" + #else + #define RTT__DMB() + #endif +#endif + +#ifndef SEGGER_RTT_CPU_CACHE_LINE_SIZE + #define SEGGER_RTT_CPU_CACHE_LINE_SIZE (0) // On most target systems where RTT is used, we do not have a CPU cache, therefore 0 is a good default here +#endif + +#ifndef SEGGER_RTT_UNCACHED_OFF + #if SEGGER_RTT_CPU_CACHE_LINE_SIZE + #error "SEGGER_RTT_UNCACHED_OFF must be defined when setting SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #else + #define SEGGER_RTT_UNCACHED_OFF (0) + #endif +#endif +#if RTT_USE_ASM + #if SEGGER_RTT_CPU_CACHE_LINE_SIZE + #error "RTT_USE_ASM is not available if SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif +#endif + +#ifndef SEGGER_RTT_ASM // defined when SEGGER_RTT.h is included from assembly file +#include +#include + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ + +// +// Determine how much we must pad the control block to make it a multiple of a cache line in size +// Assuming: U8 = 1B +// U16 = 2B +// U32 = 4B +// U8/U16/U32* = 4B +// +#if SEGGER_RTT_CPU_CACHE_LINE_SIZE // Avoid division by zero in case we do not have any cache + #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (((NumBytes + SEGGER_RTT_CPU_CACHE_LINE_SIZE - 1) / SEGGER_RTT_CPU_CACHE_LINE_SIZE) * SEGGER_RTT_CPU_CACHE_LINE_SIZE) +#else + #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (NumBytes) +#endif +#define SEGGER_RTT__CB_SIZE (16 + 4 + 4 + (SEGGER_RTT_MAX_NUM_UP_BUFFERS * 24) + (SEGGER_RTT_MAX_NUM_DOWN_BUFFERS * 24)) +#define SEGGER_RTT__CB_PADDING (SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(SEGGER_RTT__CB_SIZE) - SEGGER_RTT__CB_SIZE) + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ + +// +// Description for a circular buffer (also called "ring buffer") +// which is used as up-buffer (T->H) +// +typedef struct { + const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4" + char* pBuffer; // Pointer to start of buffer + unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty. + unsigned WrOff; // Position of next item to be written by either target. + volatile unsigned RdOff; // Position of next item to be read by host. Must be volatile since it may be modified by host. + unsigned Flags; // Contains configuration flags +} SEGGER_RTT_BUFFER_UP; + +// +// Description for a circular buffer (also called "ring buffer") +// which is used as down-buffer (H->T) +// +typedef struct { + const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4" + char* pBuffer; // Pointer to start of buffer + unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty. + volatile unsigned WrOff; // Position of next item to be written by host. Must be volatile since it may be modified by host. + unsigned RdOff; // Position of next item to be read by target (down-buffer). + unsigned Flags; // Contains configuration flags +} SEGGER_RTT_BUFFER_DOWN; + +// +// RTT control block which describes the number of buffers available +// as well as the configuration for each buffer +// +// +typedef struct { + char acID[16]; // Initialized to "SEGGER RTT" + int MaxNumUpBuffers; // Initialized to SEGGER_RTT_MAX_NUM_UP_BUFFERS (type. 2) + int MaxNumDownBuffers; // Initialized to SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (type. 2) + SEGGER_RTT_BUFFER_UP aUp[SEGGER_RTT_MAX_NUM_UP_BUFFERS]; // Up buffers, transferring information up from target via debug probe to host + SEGGER_RTT_BUFFER_DOWN aDown[SEGGER_RTT_MAX_NUM_DOWN_BUFFERS]; // Down buffers, transferring information down from host via debug probe to target +#if SEGGER_RTT__CB_PADDING + unsigned char aDummy[SEGGER_RTT__CB_PADDING]; +#endif +} SEGGER_RTT_CB; + +/********************************************************************* +* +* Global data +* +********************************************************************** +*/ +extern SEGGER_RTT_CB _SEGGER_RTT; + +/********************************************************************* +* +* RTT API functions +* +********************************************************************** +*/ +#ifdef __cplusplus + extern "C" { +#endif +int SEGGER_RTT_AllocDownBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_AllocUpBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_ConfigUpBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_ConfigDownBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_GetKey (void); +unsigned SEGGER_RTT_HasData (unsigned BufferIndex); +int SEGGER_RTT_HasKey (void); +unsigned SEGGER_RTT_HasDataUp (unsigned BufferIndex); +void SEGGER_RTT_Init (void); +unsigned SEGGER_RTT_Read (unsigned BufferIndex, void* pBuffer, unsigned BufferSize); +unsigned SEGGER_RTT_ReadNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize); +int SEGGER_RTT_SetNameDownBuffer (unsigned BufferIndex, const char* sName); +int SEGGER_RTT_SetNameUpBuffer (unsigned BufferIndex, const char* sName); +int SEGGER_RTT_SetFlagsDownBuffer (unsigned BufferIndex, unsigned Flags); +int SEGGER_RTT_SetFlagsUpBuffer (unsigned BufferIndex, unsigned Flags); +int SEGGER_RTT_WaitKey (void); +unsigned SEGGER_RTT_Write (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_ASM_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteString (unsigned BufferIndex, const char* s); +void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_PutChar (unsigned BufferIndex, char c); +unsigned SEGGER_RTT_PutCharSkip (unsigned BufferIndex, char c); +unsigned SEGGER_RTT_PutCharSkipNoLock (unsigned BufferIndex, char c); +unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex); +unsigned SEGGER_RTT_GetBytesInBuffer (unsigned BufferIndex); +// +// Function macro for performance optimization +// +#define SEGGER_RTT_HASDATA(n) (((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) + +#if RTT_USE_ASM + #define SEGGER_RTT_WriteSkipNoLock SEGGER_RTT_ASM_WriteSkipNoLock +#endif + +/********************************************************************* +* +* RTT transfer functions to send RTT data via other channels. +* +********************************************************************** +*/ +unsigned SEGGER_RTT_ReadUpBuffer (unsigned BufferIndex, void* pBuffer, unsigned BufferSize); +unsigned SEGGER_RTT_ReadUpBufferNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize); +unsigned SEGGER_RTT_WriteDownBuffer (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteDownBufferNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); + +#define SEGGER_RTT_HASDATA_UP(n) (((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + +/********************************************************************* +* +* RTT "Terminal" API functions +* +********************************************************************** +*/ +int SEGGER_RTT_SetTerminal (unsigned char TerminalId); +int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s); + +/********************************************************************* +* +* RTT printf functions (require SEGGER_RTT_printf.c) +* +********************************************************************** +*/ +int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...); +int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList); + +#ifdef __cplusplus + } +#endif + +#endif // ifndef(SEGGER_RTT_ASM) + +/********************************************************************* +* +* Defines +* +********************************************************************** +*/ + +// +// Operating modes. Define behavior if buffer is full (not enough space for entire message) +// +#define SEGGER_RTT_MODE_NO_BLOCK_SKIP (0) // Skip. Do not block, output nothing. (Default) +#define SEGGER_RTT_MODE_NO_BLOCK_TRIM (1) // Trim: Do not block, output as much as fits. +#define SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL (2) // Block: Wait until there is space in the buffer. +#define SEGGER_RTT_MODE_MASK (3) + +// +// Control sequences, based on ANSI. +// Can be used to control color, and clear the screen +// +#define RTT_CTRL_RESET "\x1B[0m" // Reset to default colors +#define RTT_CTRL_CLEAR "\x1B[2J" // Clear screen, reposition cursor to top left + +#define RTT_CTRL_TEXT_BLACK "\x1B[2;30m" +#define RTT_CTRL_TEXT_RED "\x1B[2;31m" +#define RTT_CTRL_TEXT_GREEN "\x1B[2;32m" +#define RTT_CTRL_TEXT_YELLOW "\x1B[2;33m" +#define RTT_CTRL_TEXT_BLUE "\x1B[2;34m" +#define RTT_CTRL_TEXT_MAGENTA "\x1B[2;35m" +#define RTT_CTRL_TEXT_CYAN "\x1B[2;36m" +#define RTT_CTRL_TEXT_WHITE "\x1B[2;37m" + +#define RTT_CTRL_TEXT_BRIGHT_BLACK "\x1B[1;30m" +#define RTT_CTRL_TEXT_BRIGHT_RED "\x1B[1;31m" +#define RTT_CTRL_TEXT_BRIGHT_GREEN "\x1B[1;32m" +#define RTT_CTRL_TEXT_BRIGHT_YELLOW "\x1B[1;33m" +#define RTT_CTRL_TEXT_BRIGHT_BLUE "\x1B[1;34m" +#define RTT_CTRL_TEXT_BRIGHT_MAGENTA "\x1B[1;35m" +#define RTT_CTRL_TEXT_BRIGHT_CYAN "\x1B[1;36m" +#define RTT_CTRL_TEXT_BRIGHT_WHITE "\x1B[1;37m" + +#define RTT_CTRL_BG_BLACK "\x1B[24;40m" +#define RTT_CTRL_BG_RED "\x1B[24;41m" +#define RTT_CTRL_BG_GREEN "\x1B[24;42m" +#define RTT_CTRL_BG_YELLOW "\x1B[24;43m" +#define RTT_CTRL_BG_BLUE "\x1B[24;44m" +#define RTT_CTRL_BG_MAGENTA "\x1B[24;45m" +#define RTT_CTRL_BG_CYAN "\x1B[24;46m" +#define RTT_CTRL_BG_WHITE "\x1B[24;47m" + +#define RTT_CTRL_BG_BRIGHT_BLACK "\x1B[4;40m" +#define RTT_CTRL_BG_BRIGHT_RED "\x1B[4;41m" +#define RTT_CTRL_BG_BRIGHT_GREEN "\x1B[4;42m" +#define RTT_CTRL_BG_BRIGHT_YELLOW "\x1B[4;43m" +#define RTT_CTRL_BG_BRIGHT_BLUE "\x1B[4;44m" +#define RTT_CTRL_BG_BRIGHT_MAGENTA "\x1B[4;45m" +#define RTT_CTRL_BG_BRIGHT_CYAN "\x1B[4;46m" +#define RTT_CTRL_BG_BRIGHT_WHITE "\x1B[4;47m" + + +#endif + +/*************************** End of file ****************************/ diff --git a/RTT/SEGGER_RTT_Conf.h b/RTT/SEGGER_RTT_Conf.h new file mode 100644 index 0000000..beb11aa --- /dev/null +++ b/RTT/SEGGER_RTT_Conf.h @@ -0,0 +1,424 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2020 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_Conf.h +Purpose : Implementation of SEGGER real-time transfer (RTT) which + allows real-time communication on targets which support + debugger memory accesses while the CPU is running. +Revision: $Rev: 21386 $ + +*/ + +#ifndef SEGGER_RTT_CONF_H +#define SEGGER_RTT_CONF_H + +#ifdef __IAR_SYSTEMS_ICC__ + #include +#endif + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +// +// Take in and set to correct values for Cortex-A systems with CPU cache +// +//#define SEGGER_RTT_CPU_CACHE_LINE_SIZE (32) // Largest cache line size (in bytes) in the current system +//#define SEGGER_RTT_UNCACHED_OFF (0xFB000000) // Address alias where RTT CB and buffers can be accessed uncached +// +// Most common case: +// Up-channel 0: RTT +// Up-channel 1: SystemView +// +#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS + #define SEGGER_RTT_MAX_NUM_UP_BUFFERS (1) // Max. number of up-buffers (T->H) available on this target (Default: 3) +#endif +// +// Most common case: +// Down-channel 0: RTT +// Down-channel 1: SystemView +// +#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS + #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (1) // Max. number of down-buffers (H->T) available on this target (Default: 3) +#endif + +#ifndef BUFFER_SIZE_UP + #define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k) +#endif + +#ifndef BUFFER_SIZE_DOWN + #define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16) +#endif + +#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE + #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64) +#endif + +#ifndef SEGGER_RTT_MODE_DEFAULT + #define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0) +#endif + +/********************************************************************* +* +* RTT memcpy configuration +* +* memcpy() is good for large amounts of data, +* but the overhead is big for small amounts, which are usually stored via RTT. +* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead. +* +* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions. +* This is may be required with memory access restrictions, +* such as on Cortex-A devices with MMU. +*/ +#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP + #define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop +#endif +// +// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets +// +//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) +// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes)) +//#endif + +// +// Target is not allowed to perform other RTT operations while string still has not been stored completely. +// Otherwise we would probably end up with a mixed string in the buffer. +// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here. +// +// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4. +// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches. +// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly. +// (Higher priority = lower priority number) +// Default value for embOS: 128u +// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) +// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC +// or define SEGGER_RTT_LOCK() to completely disable interrupts. +// +#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20) +#endif + +/********************************************************************* +* +* RTT lock configuration for SEGGER Embedded Studio, +* Rowley CrossStudio and GCC +*/ +#if ((defined(__SES_ARM) || defined(__SES_RISCV) || defined(__CROSSWORKS_ARM) || defined(__GNUC__) || defined(__clang__)) && !defined (__CC_ARM) && !defined(WIN32)) + #if (defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__)) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs %0, primask \n\t" \ + "movs r1, #1 \n\t" \ + "msr primask, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : \ + ); \ + } + #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs %0, basepri \n\t" \ + "mov r1, %1 \n\t" \ + "msr basepri, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : \ + ); \ + } + + #elif defined(__ARM_ARCH_7A__) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs r1, CPSR \n\t" \ + "mov %0, r1 \n\t" \ + "orr r1, r1, #0xC0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \ + "mrs r1, CPSR \n\t" \ + "bic r1, r1, #0xC0 \n\t" \ + "and r0, r0, #0xC0 \n\t" \ + "orr r1, r1, r0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : "r0", "r1", "cc" \ + ); \ + } + #elif defined(__riscv) || defined(__riscv_xlen) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("csrr %0, mstatus \n\t" \ + "csrci mstatus, 8 \n\t" \ + "andi %0, %0, 8 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("csrr a1, mstatus \n\t" \ + "or %0, %0, a1 \n\t" \ + "csrs mstatus, %0 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : "a1" \ + ); \ + } + #else + #define SEGGER_RTT_LOCK() + #define SEGGER_RTT_UNLOCK() + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for IAR EWARM +*/ +#ifdef __ICCARM__ + #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) || \ + (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__)) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_PRIMASK(); \ + __set_PRIMASK(1); + + #define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \ + } + #elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || \ + (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) || \ + (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) || \ + (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_BASEPRI(); \ + __set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY); + + #define SEGGER_RTT_UNLOCK() __set_BASEPRI(_SEGGER_RTT__LockState); \ + } + #elif (defined (__ARM7A__) && (__CORE__ == __ARM7A__)) || \ + (defined (__ARM7R__) && (__CORE__ == __ARM7R__)) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs r1, CPSR \n\t" \ + "mov %0, r1 \n\t" \ + "orr r1, r1, #0xC0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \ + "mrs r1, CPSR \n\t" \ + "bic r1, r1, #0xC0 \n\t" \ + "and r0, r0, #0xC0 \n\t" \ + "orr r1, r1, r0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : "r0", "r1", "cc" \ + ); \ + } + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for IAR RX +*/ +#ifdef __ICCRX__ + #define SEGGER_RTT_LOCK() { \ + unsigned long _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_interrupt_state(); \ + __disable_interrupt(); + + #define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration for IAR RL78 +*/ +#ifdef __ICCRL78__ + #define SEGGER_RTT_LOCK() { \ + __istate_t _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_interrupt_state(); \ + __disable_interrupt(); + + #define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration for KEIL ARM +*/ +#ifdef __CC_ARM + #if (defined __TARGET_ARCH_6S_M) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + register unsigned char _SEGGER_RTT__PRIMASK __asm( "primask"); \ + _SEGGER_RTT__LockState = _SEGGER_RTT__PRIMASK; \ + _SEGGER_RTT__PRIMASK = 1u; \ + __schedule_barrier(); + + #define SEGGER_RTT_UNLOCK() _SEGGER_RTT__PRIMASK = _SEGGER_RTT__LockState; \ + __schedule_barrier(); \ + } + #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + register unsigned char BASEPRI __asm( "basepri"); \ + _SEGGER_RTT__LockState = BASEPRI; \ + BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \ + __schedule_barrier(); + + #define SEGGER_RTT_UNLOCK() BASEPRI = _SEGGER_RTT__LockState; \ + __schedule_barrier(); \ + } + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for TI ARM +*/ +#ifdef __TI_ARM__ + #if defined (__TI_ARM_V6M0__) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_PRIMASK(); \ + __set_PRIMASK(1); + + #define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \ + } + #elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = _set_interrupt_priority(SEGGER_RTT_MAX_INTERRUPT_PRIORITY); + + #define SEGGER_RTT_UNLOCK() _set_interrupt_priority(_SEGGER_RTT__LockState); \ + } + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for CCRX +*/ +#ifdef __RX + #include + #define SEGGER_RTT_LOCK() { \ + unsigned long _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = get_psw() & 0x010000; \ + clrpsw_i(); + + #define SEGGER_RTT_UNLOCK() set_psw(get_psw() | _SEGGER_RTT__LockState); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration for embOS Simulation on Windows +* (Can also be used for generic RTT locking with embOS) +*/ +#if defined(WIN32) || defined(SEGGER_RTT_LOCK_EMBOS) + +void OS_SIM_EnterCriticalSection(void); +void OS_SIM_LeaveCriticalSection(void); + +#define SEGGER_RTT_LOCK() { \ + OS_SIM_EnterCriticalSection(); + +#define SEGGER_RTT_UNLOCK() OS_SIM_LeaveCriticalSection(); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration fallback +*/ +#ifndef SEGGER_RTT_LOCK + #define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts) +#endif + +#ifndef SEGGER_RTT_UNLOCK + #define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state) +#endif + +#endif +/*************************** End of file ****************************/ diff --git a/RTT/SEGGER_RTT_Syscalls_GCC.c b/RTT/SEGGER_RTT_Syscalls_GCC.c new file mode 100644 index 0000000..b98ca25 --- /dev/null +++ b/RTT/SEGGER_RTT_Syscalls_GCC.c @@ -0,0 +1,120 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_Syscalls_GCC.c +Purpose : Low-level functions for using printf() via RTT in GCC. + To use RTT for printf output, include this file in your + application. +Revision: $Rev: 20755 $ +---------------------------------------------------------------------- +*/ +#if (defined __GNUC__) && !(defined __SES_ARM) && !(defined __CROSSWORKS_ARM) && !(defined __ARMCC_VERSION) && !(defined __CC_ARM) + +#include // required for _write_r +#include "SEGGER_RTT.h" + + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ +// +// If necessary define the _reent struct +// to match the one passed by the used standard library. +// +struct _reent; + +/********************************************************************* +* +* Function prototypes +* +********************************************************************** +*/ +_ssize_t _write (int file, const void *ptr, size_t len); +_ssize_t _write_r(struct _reent *r, int file, const void *ptr, size_t len); + +/********************************************************************* +* +* Global functions +* +********************************************************************** +*/ + +/********************************************************************* +* +* _write() +* +* Function description +* Low-level write function. +* libc subroutines will use this system routine for output to all files, +* including stdout. +* Write data via RTT. +*/ +_ssize_t _write(int file, const void *ptr, size_t len) { + (void) file; /* Not used, avoid warning */ + SEGGER_RTT_Write(0, ptr, len); + return len; +} + +/********************************************************************* +* +* _write_r() +* +* Function description +* Low-level reentrant write function. +* libc subroutines will use this system routine for output to all files, +* including stdout. +* Write data via RTT. +*/ +_ssize_t _write_r(struct _reent *r, int file, const void *ptr, size_t len) { + (void) file; /* Not used, avoid warning */ + (void) r; /* Not used, avoid warning */ + SEGGER_RTT_Write(0, ptr, len); + return len; +} + +#endif +/****** End Of File *************************************************/ diff --git a/RTT/SEGGER_RTT_printf.c b/RTT/SEGGER_RTT_printf.c new file mode 100644 index 0000000..6a83cd9 --- /dev/null +++ b/RTT/SEGGER_RTT_printf.c @@ -0,0 +1,500 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_printf.c +Purpose : Replacement for printf to write formatted data via RTT +Revision: $Rev: 17697 $ +---------------------------------------------------------------------- +*/ +#include "SEGGER_RTT.h" +#include "SEGGER_RTT_Conf.h" + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE + #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64) +#endif + +#include +#include + + +#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0) +#define FORMAT_FLAG_PAD_ZERO (1u << 1) +#define FORMAT_FLAG_PRINT_SIGN (1u << 2) +#define FORMAT_FLAG_ALTERNATE (1u << 3) + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ + +typedef struct { + char* pBuffer; + unsigned BufferSize; + unsigned Cnt; + + int ReturnValue; + + unsigned RTTBufferIndex; +} SEGGER_RTT_PRINTF_DESC; + +/********************************************************************* +* +* Function prototypes +* +********************************************************************** +*/ + +/********************************************************************* +* +* Static code +* +********************************************************************** +*/ +/********************************************************************* +* +* _StoreChar +*/ +static void _StoreChar(SEGGER_RTT_PRINTF_DESC * p, char c) { + unsigned Cnt; + + Cnt = p->Cnt; + if ((Cnt + 1u) <= p->BufferSize) { + *(p->pBuffer + Cnt) = c; + p->Cnt = Cnt + 1u; + p->ReturnValue++; + } + // + // Write part of string, when the buffer is full + // + if (p->Cnt == p->BufferSize) { + if (SEGGER_RTT_Write(p->RTTBufferIndex, p->pBuffer, p->Cnt) != p->Cnt) { + p->ReturnValue = -1; + } else { + p->Cnt = 0u; + } + } +} + +/********************************************************************* +* +* _PrintUnsigned +*/ +static void _PrintUnsigned(SEGGER_RTT_PRINTF_DESC * pBufferDesc, unsigned v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { + static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; + unsigned Div; + unsigned Digit; + unsigned Number; + unsigned Width; + char c; + + Number = v; + Digit = 1u; + // + // Get actual field width + // + Width = 1u; + while (Number >= Base) { + Number = (Number / Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + // + // Print leading chars if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) { + if (FieldWidth != 0u) { + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) { + c = '0'; + } else { + c = ' '; + } + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, c); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Compute Digit. + // Loop until Digit has the value of the highest digit required. + // Example: If the output is 345 (Base 10), loop 2 times until Digit is 100. + // + while (1) { + if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned) + NumDigits--; + } else { + Div = v / Digit; + if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done + break; + } + } + Digit *= Base; + } + // + // Output digits + // + do { + Div = v / Digit; + v -= Div * Digit; + _StoreChar(pBufferDesc, _aV2C[Div]); + if (pBufferDesc->ReturnValue < 0) { + break; + } + Digit /= Base; + } while (Digit); + // + // Print trailing spaces if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + } +} + +/********************************************************************* +* +* _PrintInt +*/ +static void _PrintInt(SEGGER_RTT_PRINTF_DESC * pBufferDesc, int v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { + unsigned Width; + int Number; + + Number = (v < 0) ? -v : v; + + // + // Get actual field width + // + Width = 1u; + while (Number >= (int)Base) { + Number = (Number / (int)Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) { + FieldWidth--; + } + + // + // Print leading spaces if necessary + // + if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + // + // Print sign if necessary + // + if (pBufferDesc->ReturnValue >= 0) { + if (v < 0) { + v = -v; + _StoreChar(pBufferDesc, '-'); + } else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) { + _StoreChar(pBufferDesc, '+'); + } else { + + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Print leading zeros if necessary + // + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, '0'); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Print number without sign + // + _PrintUnsigned(pBufferDesc, (unsigned)v, Base, NumDigits, FieldWidth, FormatFlags); + } + } + } +} + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ +/********************************************************************* +* +* SEGGER_RTT_vprintf +* +* Function description +* Stores a formatted string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") +* sFormat Pointer to format string +* pParamList Pointer to the list of arguments for the format string +* +* Return values +* >= 0: Number of bytes which have been stored in the "Up"-buffer. +* < 0: Error +*/ +int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList) { + char c; + SEGGER_RTT_PRINTF_DESC BufferDesc; + int v; + unsigned NumDigits; + unsigned FormatFlags; + unsigned FieldWidth; + char acBuffer[SEGGER_RTT_PRINTF_BUFFER_SIZE]; + + BufferDesc.pBuffer = acBuffer; + BufferDesc.BufferSize = SEGGER_RTT_PRINTF_BUFFER_SIZE; + BufferDesc.Cnt = 0u; + BufferDesc.RTTBufferIndex = BufferIndex; + BufferDesc.ReturnValue = 0; + + do { + c = *sFormat; + sFormat++; + if (c == 0u) { + break; + } + if (c == '%') { + // + // Filter out flags + // + FormatFlags = 0u; + v = 1; + do { + c = *sFormat; + switch (c) { + case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break; + case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break; + case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break; + case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break; + default: v = 0; break; + } + } while (v); + // + // filter out field with + // + FieldWidth = 0u; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + FieldWidth = (FieldWidth * 10u) + ((unsigned)c - '0'); + } while (1); + + // + // Filter out precision (number of digits to display) + // + NumDigits = 0u; + c = *sFormat; + if (c == '.') { + sFormat++; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + NumDigits = NumDigits * 10u + ((unsigned)c - '0'); + } while (1); + } + // + // Filter out length modifier + // + c = *sFormat; + do { + if ((c == 'l') || (c == 'h')) { + sFormat++; + c = *sFormat; + } else { + break; + } + } while (1); + // + // Handle specifiers + // + switch (c) { + case 'c': { + char c0; + v = va_arg(*pParamList, int); + c0 = (char)v; + _StoreChar(&BufferDesc, c0); + break; + } + case 'd': + v = va_arg(*pParamList, int); + _PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'u': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'x': + case 'X': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, NumDigits, FieldWidth, FormatFlags); + break; + case 's': + { + const char * s = va_arg(*pParamList, const char *); + do { + c = *s; + s++; + if (c == '\0') { + break; + } + _StoreChar(&BufferDesc, c); + } while (BufferDesc.ReturnValue >= 0); + } + break; + case 'p': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, 8u, 8u, 0u); + break; + case '%': + _StoreChar(&BufferDesc, '%'); + break; + default: + break; + } + sFormat++; + } else { + _StoreChar(&BufferDesc, c); + } + } while (BufferDesc.ReturnValue >= 0); + + if (BufferDesc.ReturnValue > 0) { + // + // Write remaining data, if any + // + if (BufferDesc.Cnt != 0u) { + SEGGER_RTT_Write(BufferIndex, acBuffer, BufferDesc.Cnt); + } + BufferDesc.ReturnValue += (int)BufferDesc.Cnt; + } + return BufferDesc.ReturnValue; +} + +/********************************************************************* +* +* SEGGER_RTT_printf +* +* Function description +* Stores a formatted string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") +* sFormat Pointer to format string, followed by the arguments for conversion +* +* Return values +* >= 0: Number of bytes which have been stored in the "Up"-buffer. +* < 0: Error +* +* Notes +* (1) Conversion specifications have following syntax: +* %[flags][FieldWidth][.Precision]ConversionSpecifier +* (2) Supported flags: +* -: Left justify within the field width +* +: Always print sign extension for signed conversions +* 0: Pad with 0 instead of spaces. Ignored when using '-'-flag or precision +* Supported conversion specifiers: +* c: Print the argument as one char +* d: Print the argument as a signed integer +* u: Print the argument as an unsigned integer +* x: Print the argument as an hexadecimal integer +* s: Print the string pointed to by the argument +* p: Print the argument as an 8-digit hexadecimal integer. (Argument shall be a pointer to void.) +*/ +int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...) { + int r; + va_list ParamList; + + va_start(ParamList, sFormat); + r = SEGGER_RTT_vprintf(BufferIndex, sFormat, &ParamList); + va_end(ParamList); + return r; +} +/*************************** End of file ****************************/ diff --git a/generated.STM32F103C8T6.ld b/generated.STM32F103C8T6.ld new file mode 100644 index 0000000..7b7234a --- /dev/null +++ b/generated.STM32F103C8T6.ld @@ -0,0 +1,69 @@ +EXTERN(vector_table) +ENTRY(reset_handler) +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K + rom (rx) : ORIGIN = 0x08000000, LENGTH = 64K +} +SECTIONS +{ + .text : { + *(.vectors) + *(.text*) + . = ALIGN(4); + *(.rodata*) + . = ALIGN(4); + } >rom + .preinit_array : { + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + } >rom + .init_array : { + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + } >rom + .fini_array : { + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + } >rom + .ARM.extab : { + *(.ARM.extab*) + } >rom + .ARM.exidx : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >rom + . = ALIGN(4); + _etext = .; + .noinit (NOLOAD) : { + *(.noinit*) + } >ram + . = ALIGN(4); + .data : { + _data = .; + *(.data*) + *(.ramtext*) + . = ALIGN(4); + _edata = .; + } >ram AT >rom + _data_loadaddr = LOADADDR(.data); + .bss : { + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } >ram + /DISCARD/ : { *(.eh_frame) } + . = ALIGN(4); + end = .; +} +PROVIDE(_stack = ORIGIN(ram) + LENGTH(ram)); diff --git a/openocd/ftdi.cfg b/openocd/ftdi.cfg new file mode 100644 index 0000000..c47f180 --- /dev/null +++ b/openocd/ftdi.cfg @@ -0,0 +1,37 @@ +# FT2232H Board V3 connected to Maple Mini +adapter driver ftdi +transport select swd +ftdi_vid_pid 0x0403 0x6010 + +# ftdi_device_desc "USB Serial Converter A" +# ftdi_device_desc "FT2232H ¿ª·¢°å" +# ftdi_serial "FTZ7O8O0" + +ftdi_channel 1 +#adapter_khz 500 +#adapter_khz 8 + +ftdi_layout_init 0x0018 0x05fb +ftdi_layout_signal SWD_EN -data 0 +#ftdi_layout_signal nSRST -data 0x0020 +ftdi_layout_signal nTRST -ndata 0x0010 -noe 0x0040 +ftdi_layout_signal nSRST -ndata 0x0020 -noe 0x0040 + +source [find target/stm32f1x.cfg] +reset_config srst_only + +# Search for RTT string from start of RAM +rtt setup 0x20000000 8192 "SEGGER RTT" +rtt server start 9090 0 + +# $_TARGETNAME configure -event resume-end { +# #rtt start +# } + +$_TARGETNAME configure -event gdb-start { + rtt start +} + +$_TARGETNAME configure -event halted { + rtt stop +} diff --git a/openocd/stlink.cfg b/openocd/stlink.cfg new file mode 100644 index 0000000..00761b9 --- /dev/null +++ b/openocd/stlink.cfg @@ -0,0 +1,21 @@ +# ST-Link v2 clone connected to Maple Mini board +source [find interface/stlink.cfg] +source [find target/stm32f1x.cfg] + +#reset_config srst_only + +# Search for RTT string from start of RAM +rtt setup 0x20000000 8192 "SEGGER RTT" +rtt server start 9090 0 + +# $_TARGETNAME configure -event resume-end { +# #rtt start +# } + +$_TARGETNAME configure -event gdb-start { + rtt start +} + +$_TARGETNAME configure -event halted { + rtt stop +} diff --git a/src/delay.h b/src/delay.h new file mode 100644 index 0000000..e259fad --- /dev/null +++ b/src/delay.h @@ -0,0 +1,143 @@ +/* + * This file is part of the HAL project, inline library above libopencm3. + * + * This library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this library. If not, see . + */ +/** @defgroup DELAY_module DELAY module + * + * @brief Spin-waiting blocking API + * + * @ingroup modules + * + * LGPL License Terms @ref lgpl_license + */ +#ifndef HAL_DELAY_H_INCLUDED +#define HAL_DELAY_H_INCLUDED + +#include +#include + +/**@{*/ + +/*****************************************************************************/ +/* API definitions */ +/*****************************************************************************/ + +/*****************************************************************************/ +/* API Functions */ +/*****************************************************************************/ + +BEGIN_DECLS + +/*---------------------------------------------------------------------------*/ +/** @brief Spin-wait delay, spinning specified amount of processor cycles + * + * @note this function can be used for delays of max 2500000 cycles. + * For larger delays, please consider using timers or other waiting techniques. + * + * @param[in] cycles Cycles count need to spent in spin-wait + */ +static void delay_cycles(const int64_t cycles); + +/*---------------------------------------------------------------------------*/ +/** @brief Spin-wait delay, spinning specified amount of microseconds + * + * @note this function can be used for delays max 25 sec @ 168MHz CPU clock, or + * max 525 sec @ 8MHz CPU clock! For larger delays, please consider using + * timers or other waiting techniques. + * + * @param[in] us Microseconds needed to spin wait. + * @param[in] cpufreq Current CPU frequency in Hz + */ +static void delay_us(uint32_t us); + +/*---------------------------------------------------------------------------*/ +/** @brief Spin-wait delay, spinning specified amount of microseconds + * + * @note this function can be used for delays max 25 sec @ 168MHz CPU clock, or + * max 525 sec @ 8MHz CPU clock! For larger delays, please consider using + * timers or other waiting techniques. + * + * @param[in] ms Milliseconds needed to spin wait. + * @param[in] cpufreq Current CPU frequency in Hz + */ +static void delay_ms(uint32_t ms); + +END_DECLS + +/**@}*/ + +/*****************************************************************************/ +/* Architecture dependent implementations */ +/*****************************************************************************/ + +static void _delay_3t(uint32_t cycles) __attribute__((naked)); + +/* 3 Tcyc per tick, 4Tcyc call/ret, 1Tcyc hidden reg assignment */ +static void _delay_3t(uint32_t cycles) +{ + asm __volatile__ ( + ".syntax unified\n" + "1: \n" + " subs %[cyc],#1 \n" /* 1Tck */ + " bne 1b \n" /* 2Tck */ + " bx lr \n" + ".syntax divided\n" + : /* No output */ + : [cyc] "r" (cycles) + : /* No memory */ + ); +} + + +static inline __attribute__((always_inline)) void delay_cycles(const int64_t cycles) +{ + if (cycles <= 0) + return; + + switch (cycles % 3) { + default: + case 0: break; + case 1: asm __volatile__ ("nop"); break; + case 2: asm __volatile__ ("nop\nnop"); break; + } + + if (cycles > 3) + _delay_3t((uint32_t)(cycles / 3)); + else /* same delay as the function call */ + asm __volatile__ ("nop\nnop\nnop\nnop\nnop\nnop\n"); +} + + +/* max 25 sec @ 168MHz! */ +/* max 525 sec @ 8MHz! */ +static inline __attribute__((always_inline)) void delay_us(uint32_t us) +{ + if (us == 0) + return; + + delay_cycles(us * rcc_ahb_frequency / 1000000 - 6); +} + +/* max 25 sec @ 168MHz! */ +/* max 525 sec @ 8MHz! */ +static inline __attribute__((always_inline)) void delay_ms(uint32_t ms) +{ + if (ms == 0) + return; + + delay_cycles(ms * rcc_ahb_frequency / 1000 - 6); +} + +#endif /* HAL_DELAY_H_INCLUDED */ diff --git a/src/main.c b/src/main.c new file mode 100644 index 0000000..5f56a82 --- /dev/null +++ b/src/main.c @@ -0,0 +1,5 @@ +#include + +void main(void) { + SEGGER_RTT_printf(0, "Hello World\n"); +} diff --git a/src/util.c b/src/util.c new file mode 100644 index 0000000..5104b97 --- /dev/null +++ b/src/util.c @@ -0,0 +1,17 @@ +#include +#include "util.h" + +void hexdump(char *buf, size_t size, uint32_t width) { + if (width == 0) { + width = 16; + } + SEGGER_RTT_SetFlagsUpBuffer(0, SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL); + for (unsigned int i = 0; i < size; i++) { + SEGGER_RTT_printf(0, "%.2x ", buf[i]); + if ((i+1) % width == 0) { + SEGGER_RTT_printf(0,"\n"); + } + } + SEGGER_RTT_printf(0,"\n"); + SEGGER_RTT_SetFlagsUpBuffer(0, SEGGER_RTT_MODE_DEFAULT); +} diff --git a/src/util.h b/src/util.h new file mode 100644 index 0000000..ee83190 --- /dev/null +++ b/src/util.h @@ -0,0 +1,8 @@ +#ifndef DHT_TEST_UTIL_H +#define DHT_TEST_UTIL_H + +#include + +void hexdump(char *buf, size_t size, uint32_t width); + +#endif //DHT_TEST_UTIL_H diff --git a/toolchain-STM32F1.cmake b/toolchain-STM32F1.cmake new file mode 100644 index 0000000..1e72420 --- /dev/null +++ b/toolchain-STM32F1.cmake @@ -0,0 +1,42 @@ +set(CMAKE_SYSTEM_NAME Generic) +set(CMAKE_SYSTEM_VERSION Cortex-M3-STM32F1) + +set(CMAKE_C_COMPILER arm-none-eabi-gcc) +set(CMAKE_CXX_COMPILER arm-none-eabi-g++) +set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY) + +set(ARM_OPTIONS -mcpu=cortex-m3 -mthumb -msoft-float) + +add_compile_options( + ${ARM_OPTIONS} + -ffunction-sections + -fdata-sections + -MMD + -MP +) + +add_compile_options(-fdiagnostics-color=always) + +add_link_options( + ${ARM_OPTIONS} + -specs=nano.specs + -specs=nosys.specs # puts does not work..... + #-specs=rdimon.specs + LINKER:-lc + LINKER:-lgcc + LINKER:-lnosys + #-specs=nano.specs + #-u_printf_float + #-u_scanf_float + -nostartfiles + #-Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group + LINKER:--gc-sections + LINKER:--build-id + LINKER:-Map=${CMAKE_PROJECT_NAME}.map + -T${CMAKE_SOURCE_DIR}/generated.STM32F103C8T6.ld +) + + +set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) +set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)