!!omap
- I2C0_CONSET:
    fields: !!omap
    - AA:
        access: rw
        description: Assert acknowledge flag
        lsb: 2
        reset_value: '0'
        width: 1
    - SI:
        access: rw
        description: I2C interrupt flag
        lsb: 3
        reset_value: '0'
        width: 1
    - STO:
        access: rw
        description: STOP flag
        lsb: 4
        reset_value: '0'
        width: 1
    - STA:
        access: rw
        description: START flag
        lsb: 5
        reset_value: '0'
        width: 1
    - I2EN:
        access: rw
        description: I2C interface enable
        lsb: 6
        reset_value: '0'
        width: 1
- I2C1_CONSET:
    fields: !!omap
    - AA:
        access: rw
        description: Assert acknowledge flag
        lsb: 2
        reset_value: '0'
        width: 1
    - SI:
        access: rw
        description: I2C interrupt flag
        lsb: 3
        reset_value: '0'
        width: 1
    - STO:
        access: rw
        description: STOP flag
        lsb: 4
        reset_value: '0'
        width: 1
    - STA:
        access: rw
        description: START flag
        lsb: 5
        reset_value: '0'
        width: 1
    - I2EN:
        access: rw
        description: I2C interface enable
        lsb: 6
        reset_value: '0'
        width: 1
- I2C0_STAT:
    fields: !!omap
    - STATUS:
        access: r
        description: These bits give the actual status information about the I2C interface
        lsb: 3
        reset_value: '0x1f'
        width: 5
- I2C1_STAT:
    fields: !!omap
    - STATUS:
        access: r
        description: These bits give the actual status information about the I2C interface
        lsb: 3
        reset_value: '0x1f'
        width: 5
- I2C0_DAT:
    fields: !!omap
    - DATA:
        access: rw
        description: This register holds data values that have been received or are
          to be transmitted
        lsb: 0
        reset_value: '0'
        width: 8
- I2C1_DAT:
    fields: !!omap
    - DATA:
        access: rw
        description: This register holds data values that have been received or are
          to be transmitted
        lsb: 0
        reset_value: '0'
        width: 8
- I2C0_ADR0:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_ADR0:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_SCLH:
    fields: !!omap
    - SCLH:
        access: rw
        description: Count for SCL HIGH time period selection
        lsb: 0
        reset_value: '0x0004'
        width: 16
- I2C1_SCLH:
    fields: !!omap
    - SCLH:
        access: rw
        description: Count for SCL HIGH time period selection
        lsb: 0
        reset_value: '0x0004'
        width: 16
- I2C0_SCLL:
    fields: !!omap
    - SCLL:
        access: rw
        description: Count for SCL LOW time period selection
        lsb: 0
        reset_value: '0x0004'
        width: 16
- I2C1_SCLL:
    fields: !!omap
    - SCLL:
        access: rw
        description: Count for SCL LOW time period selection
        lsb: 0
        reset_value: '0x0004'
        width: 16
- I2C0_CONCLR:
    fields: !!omap
    - AAC:
        access: w
        description: Assert acknowledge Clear bit
        lsb: 2
        reset_value: '0'
        width: 1
    - SIC:
        access: w
        description: I2C interrupt Clear bit
        lsb: 3
        reset_value: '0'
        width: 1
    - STAC:
        access: w
        description: START flag Clear bit
        lsb: 5
        reset_value: '0'
        width: 1
    - I2ENC:
        access: w
        description: I2C interface Disable bit
        lsb: 6
        reset_value: '0'
        width: 1
- I2C1_CONCLR:
    fields: !!omap
    - AAC:
        access: w
        description: Assert acknowledge Clear bit
        lsb: 2
        reset_value: '0'
        width: 1
    - SIC:
        access: w
        description: I2C interrupt Clear bit
        lsb: 3
        reset_value: '0'
        width: 1
    - STAC:
        access: w
        description: START flag Clear bit
        lsb: 5
        reset_value: '0'
        width: 1
    - I2ENC:
        access: w
        description: I2C interface Disable bit
        lsb: 6
        reset_value: '0'
        width: 1
- I2C0_MMCTRL:
    fields: !!omap
    - MM_ENA:
        access: rw
        description: Monitor mode enable
        lsb: 0
        reset_value: '0'
        width: 1
    - ENA_SCL:
        access: rw
        description: SCL output enable
        lsb: 1
        reset_value: '0'
        width: 1
    - MATCH_ALL:
        access: rw
        description: Select interrupt register match
        lsb: 2
        reset_value: '0'
        width: 1
- I2C1_MMCTRL:
    fields: !!omap
    - MM_ENA:
        access: rw
        description: Monitor mode enable
        lsb: 0
        reset_value: '0'
        width: 1
    - ENA_SCL:
        access: rw
        description: SCL output enable
        lsb: 1
        reset_value: '0'
        width: 1
    - MATCH_ALL:
        access: rw
        description: Select interrupt register match
        lsb: 2
        reset_value: '0'
        width: 1
- I2C0_ADR1:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_ADR1:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_ADR2:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_ADR2:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_ADR3:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_ADR3:
    fields: !!omap
    - GC:
        access: rw
        description: General Call enable bit
        lsb: 0
        reset_value: '0'
        width: 1
    - ADDRESS:
        access: rw
        description: The I2C device address for slave mode
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_DATA_BUFFER:
    fields: !!omap
    - DATA:
        access: r
        description: This register holds contents of the 8 MSBs of the DAT shift register
        lsb: 0
        reset_value: '0'
        width: 8
- I2C1_DATA_BUFFER:
    fields: !!omap
    - DATA:
        access: r
        description: This register holds contents of the 8 MSBs of the DAT shift register
        lsb: 0
        reset_value: '0'
        width: 8
- I2C0_MASK0:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_MASK0:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_MASK1:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_MASK1:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_MASK2:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_MASK2:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C0_MASK3:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7
- I2C1_MASK3:
    fields: !!omap
    - MASK:
        access: rw
        description: Mask bits
        lsb: 1
        reset_value: '0'
        width: 7