Arti Zirk
244fdbc35c
subrepo: subdir: "libopencm3" merged: "f5813a54" upstream: origin: "https://github.com/libopencm3/libopencm3" branch: "master" commit: "f5813a54" git-subrepo: version: "0.4.3" origin: "???" commit: "???"
112 lines
3.1 KiB
C
112 lines
3.1 KiB
C
/** @addtogroup fmc_file FMC peripheral API
|
|
@ingroup peripheral_apis
|
|
|
|
@author @htmlonly © @endhtmlonly 2012 Ken Sarkies ksarkies@internode.on.net
|
|
|
|
This library supports the Flexible Memory Controller in the STM32F4xx and
|
|
STM32F7xx series of ARM Cortex Microcontrollers by ST Microelectronics.
|
|
*/
|
|
/*
|
|
*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* Utility functions for the SDRAM component of the FMC */
|
|
|
|
#include <stdint.h>
|
|
#include <libopencm3/stm32/fsmc.h>
|
|
|
|
/**@{*/
|
|
|
|
/*
|
|
* Install various timing values into the correct place in the
|
|
* SDRAM Timing Control Register format.
|
|
*
|
|
* Note that the register is 'zero' based to save bits so 1 cycle
|
|
* is stored as '0'. This command takes actual cycles and adjusts
|
|
* by subtracting 1.
|
|
*/
|
|
uint32_t
|
|
sdram_timing(struct sdram_timing *t) {
|
|
uint32_t result;
|
|
|
|
result = 0;
|
|
result |= ((t->trcd - 1) & 0xf) << FMC_SDTR_TRCD_SHIFT;
|
|
result |= ((t->trp - 1) & 0xf) << FMC_SDTR_TRP_SHIFT;
|
|
result |= ((t->twr - 1) & 0xf) << FMC_SDTR_TWR_SHIFT;
|
|
result |= ((t->trc - 1) & 0xf) << FMC_SDTR_TRC_SHIFT;
|
|
result |= ((t->tras - 1) & 0xf) << FMC_SDTR_TRAS_SHIFT;
|
|
result |= ((t->txsr - 1) & 0xf) << FMC_SDTR_TXSR_SHIFT;
|
|
result |= ((t->tmrd - 1) & 0xf) << FMC_SDTR_TMRD_SHIFT;
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Send a command to the SDRAM controller, wait until it is not
|
|
* busy before sending. This allows you to chain sending commands
|
|
* and the code will pause as needed between them.
|
|
*/
|
|
void
|
|
sdram_command(enum fmc_sdram_bank bank,
|
|
enum fmc_sdram_command cmd, int autorefresh, int modereg) {
|
|
uint32_t tmp_reg = 0;
|
|
|
|
switch (bank) {
|
|
case SDRAM_BANK1:
|
|
tmp_reg = FMC_SDCMR_CTB1;
|
|
break;
|
|
case SDRAM_BANK2:
|
|
tmp_reg = FMC_SDCMR_CTB2;
|
|
break;
|
|
case SDRAM_BOTH_BANKS:
|
|
tmp_reg = FMC_SDCMR_CTB1 | FMC_SDCMR_CTB2;
|
|
break;
|
|
}
|
|
tmp_reg |= autorefresh << FMC_SDCMR_NRFS_SHIFT;
|
|
tmp_reg |= modereg << FMC_SDCMR_MRD_SHIFT;
|
|
switch (cmd) {
|
|
case SDRAM_CLK_CONF:
|
|
tmp_reg |= FMC_SDCMR_MODE_CLOCK_CONFIG_ENA;
|
|
break;
|
|
case SDRAM_AUTO_REFRESH:
|
|
tmp_reg |= FMC_SDCMR_MODE_AUTO_REFRESH;
|
|
break;
|
|
case SDRAM_LOAD_MODE:
|
|
tmp_reg |= FMC_SDCMR_MODE_LOAD_MODE_REGISTER;
|
|
break;
|
|
case SDRAM_PALL:
|
|
tmp_reg |= FMC_SDCMR_MODE_PALL;
|
|
break;
|
|
case SDRAM_SELF_REFRESH:
|
|
tmp_reg |= FMC_SDCMR_MODE_SELF_REFRESH;
|
|
break;
|
|
case SDRAM_POWER_DOWN:
|
|
tmp_reg |= FMC_SDCMR_MODE_POWER_DOWN;
|
|
break;
|
|
case SDRAM_NORMAL:
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Wait for the next chance to talk to the controller */
|
|
while (FMC_SDSR & FMC_SDSR_BUSY);
|
|
|
|
/* Send the next command */
|
|
FMC_SDCMR = tmp_reg;
|
|
}
|
|
|
|
/**@}*/
|