usbtest/libopencm3/lib/stm32/common/usart_common_all.c
Arti Zirk 244fdbc35c git subrepo clone https://github.com/libopencm3/libopencm3
subrepo:
  subdir:   "libopencm3"
  merged:   "f5813a54"
upstream:
  origin:   "https://github.com/libopencm3/libopencm3"
  branch:   "master"
  commit:   "f5813a54"
git-subrepo:
  version:  "0.4.3"
  origin:   "???"
  commit:   "???"
2021-09-30 16:34:10 +03:00

428 lines
11 KiB
C

/** @addtogroup usart_file USART peripheral API
@ingroup peripheral_apis
@author @htmlonly &copy; @endhtmlonly 2009 Uwe Hermann <uwe@hermann-uwe.de>
This library supports the USART/UART in the STM32F series
of ARM Cortex Microcontrollers by ST Microelectronics.
Devices can have up to 3 USARTs and 2 UARTs.
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
/**@{*/
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/rcc.h>
/*---------------------------------------------------------------------------*/
/** @brief USART Set Baudrate.
The baud rate is computed from the APB high-speed prescaler clock (for
USART1/6) or the APB low-speed prescaler clock (for other USARTs). These values
must be correctly set before calling this function (refer to the
rcc_clock_setup-* functions in RCC).
Note: For LPUART, baudrates over 2**24 (~16.7 Mbaud) may overflow
the calculation and are therefore not supported by this function.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] baud unsigned 32 bit. Baud rate specified in Hz.
*/
void usart_set_baudrate(uint32_t usart, uint32_t baud)
{
uint32_t clock = rcc_apb1_frequency;
#if defined USART1
if ((usart == USART1)
#if defined USART6
|| (usart == USART6)
#endif
) {
clock = rcc_apb2_frequency;
}
#endif
/*
* Yes it is as simple as that. The reference manual is
* talking about fractional calculation but it seems to be only
* marketing babble to sound awesome. It is nothing else but a
* simple divider to generate the correct baudrate.
*
* Note: We round() the value rather than floor()ing it, for more
* accurate divisor selection.
*/
#ifdef LPUART1
if (usart == LPUART1) {
USART_BRR(usart) = (clock / baud) * 256
+ ((clock % baud) * 256 + baud / 2) / baud;
return;
}
#endif
USART_BRR(usart) = (clock + baud / 2) / baud;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Set Word Length.
The word length is set to 8 or 9 bits. Note that the last bit will be a parity
bit if parity is enabled, in which case the data length will be 7 or 8 bits
respectively.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] bits unsigned 32 bit. Word length in bits 8 or 9.
*/
void usart_set_databits(uint32_t usart, uint32_t bits)
{
if (bits == 8) {
USART_CR1(usart) &= ~USART_CR1_M; /* 8 data bits */
} else {
USART_CR1(usart) |= USART_CR1_M; /* 9 data bits */
}
}
/*---------------------------------------------------------------------------*/
/** @brief USART Set Stop Bit(s).
The stop bits are specified as 0.5, 1, 1.5 or 2.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] stopbits unsigned 32 bit. Stop bits @ref usart_cr2_stopbits.
*/
void usart_set_stopbits(uint32_t usart, uint32_t stopbits)
{
uint32_t reg32;
reg32 = USART_CR2(usart);
reg32 = (reg32 & ~USART_CR2_STOPBITS_MASK) | stopbits;
USART_CR2(usart) = reg32;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Set Parity.
The parity bit can be selected as none, even or odd.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] parity unsigned 32 bit. Parity @ref usart_cr1_parity.
*/
void usart_set_parity(uint32_t usart, uint32_t parity)
{
uint32_t reg32;
reg32 = USART_CR1(usart);
reg32 = (reg32 & ~USART_PARITY_MASK) | parity;
USART_CR1(usart) = reg32;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Set Rx/Tx Mode.
The mode can be selected as Rx only, Tx only or Rx+Tx.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] mode unsigned 32 bit. Mode @ref usart_cr1_mode.
*/
void usart_set_mode(uint32_t usart, uint32_t mode)
{
uint32_t reg32;
reg32 = USART_CR1(usart);
reg32 = (reg32 & ~USART_MODE_MASK) | mode;
USART_CR1(usart) = reg32;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Set Hardware Flow Control.
The flow control bit can be selected as none, RTS, CTS or RTS+CTS.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] flowcontrol unsigned 32 bit. Flowcontrol @ref usart_cr3_flowcontrol.
*/
void usart_set_flow_control(uint32_t usart, uint32_t flowcontrol)
{
uint32_t reg32;
reg32 = USART_CR3(usart);
reg32 = (reg32 & ~USART_FLOWCONTROL_MASK) | flowcontrol;
USART_CR3(usart) = reg32;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Enable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable(uint32_t usart)
{
USART_CR1(usart) |= USART_CR1_UE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Disable.
At the end of the current frame, the USART is disabled to reduce power.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable(uint32_t usart)
{
USART_CR1(usart) &= ~USART_CR1_UE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Send Data Word with Blocking
Blocks until the transmit data buffer becomes empty then writes the next data
word for transmission.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@param[in] data unsigned 16 bit.
*/
void usart_send_blocking(uint32_t usart, uint16_t data)
{
usart_wait_send_ready(usart);
usart_send(usart, data);
}
/*---------------------------------------------------------------------------*/
/** @brief USART Read a Received Data Word with Blocking.
Wait until a data word has been received then return the word.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
@returns unsigned 16 bit data word.
*/
uint16_t usart_recv_blocking(uint32_t usart)
{
usart_wait_recv_ready(usart);
return usart_recv(usart);
}
/*---------------------------------------------------------------------------*/
/** @brief USART Receiver DMA Enable.
DMA is available on:
@li USART1 Rx DMA1 channel 5.
@li USART2 Rx DMA1 channel 6.
@li USART3 Rx DMA1 channel 3.
@li UART4 Rx DMA2 channel 3.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_rx_dma(uint32_t usart)
{
USART_CR3(usart) |= USART_CR3_DMAR;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Receiver DMA Disable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_rx_dma(uint32_t usart)
{
USART_CR3(usart) &= ~USART_CR3_DMAR;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Transmitter DMA Enable.
DMA is available on:
@li USART1 Tx DMA1 channel 4.
@li USART2 Tx DMA1 channel 7.
@li USART3 Tx DMA1 channel 2.
@li UART4 Tx DMA2 channel 5.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_tx_dma(uint32_t usart)
{
USART_CR3(usart) |= USART_CR3_DMAT;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Transmitter DMA Disable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_tx_dma(uint32_t usart)
{
USART_CR3(usart) &= ~USART_CR3_DMAT;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Receiver Interrupt Enable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_rx_interrupt(uint32_t usart)
{
USART_CR1(usart) |= USART_CR1_RXNEIE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Receiver Interrupt Disable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_rx_interrupt(uint32_t usart)
{
USART_CR1(usart) &= ~USART_CR1_RXNEIE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Transmitter Interrupt Enable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_tx_interrupt(uint32_t usart)
{
USART_CR1(usart) |= USART_CR1_TXEIE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Transmitter Interrupt Disable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_tx_interrupt(uint32_t usart)
{
USART_CR1(usart) &= ~USART_CR1_TXEIE;
}
/*---------------------------------------------------------------------------*/
/**
* @brief USART Transmission Complete Interrupt Enable
*
* @param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_tx_complete_interrupt(uint32_t usart)
{
USART_CR1(usart) |= USART_CR1_TCIE;
}
/*---------------------------------------------------------------------------*/
/**
* @brief USART Transmission Complete Interrupt Disable
*
* @param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_tx_complete_interrupt(uint32_t usart)
{
USART_CR1(usart) &= ~USART_CR1_TCIE;
}
/** @brief USART Idle Interrupt Enable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_idle_interrupt(uint32_t usart)
{
USART_CR1(usart) |= USART_CR1_IDLEIE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Idle Interrupt Disable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_idle_interrupt(uint32_t usart)
{
USART_CR1(usart) &= ~USART_CR1_IDLEIE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Error Interrupt Enable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_enable_error_interrupt(uint32_t usart)
{
USART_CR3(usart) |= USART_CR3_EIE;
}
/*---------------------------------------------------------------------------*/
/** @brief USART Error Interrupt Disable.
@param[in] usart unsigned 32 bit. USART block register address base @ref
usart_reg_base
*/
void usart_disable_error_interrupt(uint32_t usart)
{
USART_CR3(usart) &= ~USART_CR3_EIE;
}
/**@}*/