mirror of
https://git.k-space.ee/arti/vt1200.git
synced 2026-10-30 12:03:54 +02:00
SDD
72a96862c7
Four-config A/B (IRQ wiring kept in all four; both mc68681 edits reverted in cfg 4): the console line and L3FA6E4B0's return are identical (HOST PORT - 15 / 6) in cfg 1-4. Verdict: PRE-EXISTING. Neither timing edit causes or relocates the failure. Methodology correction: hp_ret.lua's labels were on the wrong rets addresses. The real returns are L3FA6E4B0 -> 6, L3FA71BC0 -> 0x00900040, L3FA753D0 -> 0x00000408, L3FA767E0 -> 0. hp_ret2.lua fixes the addresses. What 6 is: not a device code. L3FA6E4B0 reduces five descriptor fields (struct+0x60/ 0x80/0xa0/0xc0/0xe0, written from the four sub-test calls) to a 5-bit value; 6 = 0b00110 = "L3FA71BC0 nonzero, L3FA753D0 nonzero". The caller turns any nonzero into 0x400, which the dispatcher maps to HOST PORT - 15. Flagged: L3FA753D0 returns 0x408 while all its own checks pass, so "nonzero" != "failed its checks"; polarity unresolved. Leads: COUNTER_READY is set by the firmware's own Start-Counter-Command read (reg 0x0E), is not in IMR, and is not handled by the ISR -- not the cause. The DUART clock (3.6864 MHz) could not be confirmed from the service guide. Variant MAME files kept in harness/mame/mame_edits/. Regression holds.
24 lines
915 B
Lua
24 lines
915 B
Lua
-- hp_ret2.lua -- return values, with the rets addresses verified from the disassembly:
|
|
-- L3FA71BC0 rets @ 3FA753C0, L3FA753D0 (RXCHECK) @ 3FA767D0,
|
|
-- L3FA767E0 (XMITPASS) @ 3FA77800.
|
|
local machine = manager.machine
|
|
local cpu = machine.devices[':maincpu']
|
|
local dbg = machine.debugger
|
|
if not dbg then print("ERROR: no debugger"); machine:exit(); return end
|
|
local function bp(addr, msg)
|
|
dbg:command('bpset ' .. addr .. ',,{ printf "' .. msg ..
|
|
' a8=%08X a7=%08X a9=%08X a11=%08X a13=%08X\\n", a8, a7, a9, a11, a13 ; g }')
|
|
end
|
|
bp("3fa753c0", "RET-BC0")
|
|
bp("3fa767d0", "RET-RXCHECK")
|
|
bp("3fa77800", "RET-XMITPASS")
|
|
bp("3fa84fe0", "RET-L3FA6E4B0")
|
|
bp("3fa6e4b0", "ENTER-GENERIC")
|
|
local n = 0
|
|
emu.register_frame_done(function()
|
|
n = n + 1
|
|
if n >= tonumber(os.getenv("HP_FRAMES") or "700") then print("done "..n); machine:exit() end
|
|
end, "vt1200-hp-ret2")
|
|
dbg.visible_cpu = cpu
|
|
dbg.execution_state = 'run'
|