mirror of
https://git.k-space.ee/arti/vt1200.git
synced 2026-10-30 12:03:54 +02:00
SDD
9902722165
Root cause of the missing THRA write (HOST PORT test): the level-1 host-port
test's transmit is ISR-driven, and the DUART interrupt was never wired to the
CPU. The firmware installs RAM trampolines in the fixed vector table (INT1
vector 0xffffffc0 -> stub at bit 0x0f60 = JA 0x3FA92F40, which calls the DUART
ISR L3FA78D90 with (2, 0x270860, 0x6400000)). Counters: INTENB reaches 0x0006
(INT1|INT2) at the test, so interrupts are enabled.
vt1200.cpp: wire m_duart1/m_duart2 irq_cb() to CPU external interrupt 1/2
(duart1_irq_w/duart2_irq_w), gated on VT1200_DUART. Result: THRA writes go
from 0 to 20 per run; the test's SRA-overrun and RHRA-pattern checks now pass.
MAME tree (mc68681.cpp/.h), two datasheet-backed corrections with revert notes:
1. TxRDY was asserted mid-character ("not until the end of start bit time");
the datasheet asserts it at the THR->TSR transfer. Corrected.
2. The overrun error was latched when the overrunning character *completed*
(rx_fifo_push); the datasheet latches it "upon receipt of the start bit of
the new (overrunning) character". Corrected via duart_channel::rx_w().
This clears every check in the RXCHECK sub-test (flags 1 -> 0).
Acceptance is NOT met: cap.lua still prints 'LEVEL1/2 ERROR -> HOST PORT - 15'.
The next failure is the preceding L3FA71BC0 (DUART baud/timer) sub-test
returning 6; its flag-set sites were breakpointed and never fired. Regression
holds (no VT1200_* env -> PC=3FDCE400 samples=199). Details, numbers and the
datasheet audit: harness/mame/DUART_REPORT.md sections FINAL FINDINGS / UPDATE.
31 lines
1.1 KiB
Lua
31 lines
1.1 KiB
Lua
-- hp_int.lua -- is the DUART IRQ reaching the CPU?
|
|
local machine = manager.machine
|
|
local cpu = machine.devices[':maincpu']
|
|
local dbg = machine.debugger
|
|
local prog = cpu.spaces['program']
|
|
if not dbg then print("ERROR: no debugger"); machine:exit(); return end
|
|
local function bp(addr, msg)
|
|
dbg:command(string.format('bpset %s,,{ printf "%s pc=%%08X a7=%%08X a9=%%08X a11=%%08X\\n", pc, a7, a9, a11 ; g }', addr, msg))
|
|
end
|
|
bp("0f60", "INT1-TRAMPOLINE")
|
|
bp("0f30", "INT2-TRAMPOLINE")
|
|
bp("3fa92f40", "INT1-HANDLER")
|
|
bp("3fa78d90", "DUART-ISR")
|
|
bp("3fa79c00", "ISR-THRA")
|
|
bp("3fa7b6e0", "DUART-ISR2")
|
|
|
|
local rd = function(a) return prog:read_u16(a) end
|
|
local last = {}
|
|
local keys = { INTPEND=0xc0000120, INTENB=0xc0000110, D1ISR=0x06400050 }
|
|
local n = 0
|
|
emu.register_frame_done(function()
|
|
n = n + 1
|
|
for k,a in pairs(keys) do
|
|
local v = rd(a)
|
|
if last[k] ~= v then print(string.format("f%4d %s -> %04X", n, k, v)); last[k]=v end
|
|
end
|
|
if n >= tonumber(os.getenv("HP_FRAMES") or "700") then print("done "..n); machine:exit() end
|
|
end, "vt1200-hp-int")
|
|
dbg.visible_cpu = cpu
|
|
dbg.execution_state = 'run'
|