docs: re-verify the Current State table against the device
Three rows in this table had already been caught as wrong by the user, so the
rest were checked rather than trusted. Five more were stale or misleading:
- "mac80211 registration (wlan0)" -- the interface is wlan22 right now. The
index increments on every reload and host re-create, so naming wlan0 in the
table invites a wrong assumption in every script that reads it.
- "Firmware upload (48KB) + patch (16KB)" -- the blobs are 48056 and 16716
bytes. Stated exactly now.
- "NOP ping (data path verification) | Working" -- sv6160_rpu_fw_priv_nop()
is compiled in and has NO callers anywhere in the driver. The row
described dead code as a working feature; it presumably was a bring-up
check before real traffic existed.
- "authenticated ~19ms after the auth frame" -- measured now at 9.7 ms
(81579.373474 -> 81579.383137).
- A-MSDU still said mac80211 "never builds one", contradicting the section
added directly below it in the same file: with SUPPORT_FAST_XMIT it does
build one (tx_max_frame 3080), and the chip then cannot carry it.
Verified live and correct: m0_ready, RESET_COMPLETE, FW_PRIV_INIT, VIF add,
channel programming, scan finding 12 BSSes, auth/assoc/4-way/DHCP, tx_frames ==
tx_done_events at 3099, 81k RX drains.
Rows resting on a single past measurement rather than anything re-checkable --
the 8h soak, suspend/resume, the roaming walk -- now say "measured" so it is
clear they are historical evidence rather than a live property.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JSNniou44nN9EFGqTmZ6my
This commit is contained in:
1 parent
f64d378b63
commit
09fd7881db
1 file changed
+8
-8
@@ -29,30 +29,30 @@ and `SDIO_ARCHITECTURE.md` for the SDIO protocol specification.
|
||||
| Feature | Status |
|
||||
|---------|--------|
|
||||
| SDIO enumeration | Working |
|
||||
| Firmware upload (48KB) + patch (16KB) | Working |
|
||||
| Firmware upload (48056 B) + patch (16716 B) | Working |
|
||||
| Firmware state machine (M0_READY) | Working |
|
||||
| mac80211 registration (wlan0) | Working |
|
||||
| mac80211 registration | Working — note the interface index increments on every reload, so it is rarely `wlan0` |
|
||||
| SDIO CMD53 bidirectional data path | Working |
|
||||
| RPU command/event protocol | Working |
|
||||
| RPU_CMD_RESET → RESET_COMPLETE | Working |
|
||||
| FW_PRIV_INIT (SET_CONFIG) | Working |
|
||||
| NOP ping (data path verification) | Working |
|
||||
| NOP ping (`FW_PRIV_NOP`) | Implemented but **unused** — `sv6160_rpu_fw_priv_nop()` has no callers; the data path is verified by real traffic now |
|
||||
| VIF add/remove | Working |
|
||||
| Channel programming | Working |
|
||||
| WiFi scanning (native `RPU_CMD_SCAN`) | Working — finds all APs, beacons reach cfg80211 |
|
||||
| Frame TX | Working — every frame completes (`TX_DONE` 1:1) |
|
||||
| Frame RX (broadcast + unicast) | Working |
|
||||
| WiFi authentication | Working — `authenticated` ~19ms after the auth frame |
|
||||
| WiFi authentication | Working — `authenticated` ~10ms after the auth frame |
|
||||
| WiFi association | Working — `RX AssocResp status=0`, `associated` |
|
||||
| WPA2 key management | Working — 4-way handshake, CCMP group + pairwise keys |
|
||||
| DHCP / usable connection | Working — carries ssh, the link this was developed over |
|
||||
| Sustained link | Working — 8h soak, 2,149,692 TX descriptors, all completed 1:1 |
|
||||
| Suspend / resume | Working — same BSS and IP across a real deep suspend |
|
||||
| Roaming | Working — real walk: 2 cross-channel roams, 40ms and 82ms handoffs, IP kept |
|
||||
| Sustained link | Working — measured: 8h soak, 2,149,692 TX descriptors, all completed 1:1 |
|
||||
| Suspend / resume | Working — measured once: same BSS and IP across a real deep suspend |
|
||||
| Roaming | Working — measured on a real walk: 2 cross-channel roams, 40ms and 82ms handoffs, IP kept |
|
||||
| CQM (RSSI thresholds) | Working — raised from RX-frame RSSI; drives iwd's roam trigger |
|
||||
| Wedge recovery | Working — both failure modes self-recover unattended (see below) |
|
||||
| Power save | Measured and **deliberately rejected** — ~8mA of a ~365mA budget, PS measured *worse* |
|
||||
| A-MSDU | Not engaged — the enabling rewrite (`txq=1`) exists and is active, but mac80211 still never builds one; see below |
|
||||
| A-MSDU | Not engaged — root-caused to a missing `SUPPORT_FAST_XMIT`; adding it does aggregate but the chip cannot carry the result. Dead end, see below |
|
||||
| MAC address | Stable and per-device — the factory MAC, via U-Boot into the DT; see below |
|
||||
|
||||
### A-MSDU: chased down, and it is a dead end
|
||||
|
||||
Reference in new issue
Block a user