ben-blinkenlights/avrdude/patches/nanonote-nxuart.patch

Index: avrdude/avrdude.conf.in
===================================================================
--- avrdude.orig/avrdude.conf.in	2011-03-09 17:13:57.000000000 -0300
+++ avrdude/avrdude.conf.in	2011-03-09 17:19:28.000000000 -0300
@@ -592,6 +592,29 @@
   type  = avr910;
 ;
 
+#
+# 8:10 card pin assignment:
+#
+# DAT1  1
+# DAT0  2
+# VSS   -
+# CLK   - (reserved for clock output)
+# VDD   -
+# CMD   6
+# DAT3  7
+# DAT2  8
+#
+
+programmer
+  id    = "nanonote_nxuart";
+  desc  = "NanoNote External UART 8:10 card";
+  type  = nanonote;
+  reset = 8;
+  sck   = 2;
+  mosi  = 7;
+  miso  = 1;
+;
+
 @HAVE_PARPORT_BEGIN@  Inclusion of the following depends on --enable-parport
 # Parallel port programmers.
avrdude/: make patches relative to avrdude-<version> directory This way, the path names in the patch files stay the same across avrdude versions. 2012-07-22 08:37:19 +03:00			`Index: avrdude/avrdude.conf.in`
uart/avrdude: moved avrdude.conf.in change for UART to separate patch 2011-02-04 02:55:00 +02:00			`===================================================================`
avrdude/: make patches relative to avrdude-<version> directory This way, the path names in the patch files stay the same across avrdude versions. 2012-07-22 08:37:19 +03:00			`--- avrdude.orig/avrdude.conf.in 2011-03-09 17:13:57.000000000 -0300`
			`+++ avrdude/avrdude.conf.in 2011-03-09 17:19:28.000000000 -0300`
uart/avrdude: moved avrdude.conf.in change for UART to separate patch 2011-02-04 02:55:00 +02:00			`@@ -592,6 +592,29 @@`
			`type = avr910;`
			`;`

			`+#`
			`+# 8:10 card pin assignment:`
			`+#`
			`+# DAT1 1`
			`+# DAT0 2`
			`+# VSS -`
uart/avrdude: various corrections nanonote-uart.patch: - avrdude.conf.in: CLK is reserved for clock output nanonote.patch: - nanonote.c (pin_map, nanonote_setpin, nanonote_getpin): make pin map zero-based - nanonote.c (nanonote_setpin): instead of having out own delay loop setting the pin repeatedly, just add the delay we need to pgm->ispdelay+100 - nanonote.c (nanonote_setpin): increase delay for atusb-pgm - nanonote.c (nanonote_getpin, nanonote_open): begin with all pins set to output and switch MISO only when read 2011-02-04 22:51:27 +02:00			`+# CLK - (reserved for clock output)`
uart/avrdude: moved avrdude.conf.in change for UART to separate patch 2011-02-04 02:55:00 +02:00			`+# VDD -`
avrdude/: fixed confusing typo in avrdude.conf, added tuxbrain's nanonote_ICSP - nanonote-nxuart.patch (avrdude.conf): typo, CMD is signal 6, not 5 (by David Reyes Samblas Martinez) - series, nanonote-icsp.patch (avrdude.conf): NanoNote ICSP 8:10 cable, by David Reyes Samblas Martinez 2011-03-09 22:28:24 +02:00			`+# CMD 6`
uart/avrdude: moved avrdude.conf.in change for UART to separate patch 2011-02-04 02:55:00 +02:00			`+# DAT3 7`
			`+# DAT2 8`
			`+#`
			`+`
			`+programmer`
avrdude/patches: renamed "uart" to "nxuart" - patches/series, patches/nanonote-uart.patch: renamed to patches/nanonote-nxuart.patch - patches/nanonote-nxuart.patch: changed ID from "nanonote_uart" to "nanonote_nxuart" - patches/nanonote-nxuart.patch: added "External" to title/description 2011-03-07 19:50:17 +02:00			`+ id = "nanonote_nxuart";`
			`+ desc = "NanoNote External UART 8:10 card";`
uart/avrdude: moved avrdude.conf.in change for UART to separate patch 2011-02-04 02:55:00 +02:00			`+ type = nanonote;`
			`+ reset = 8;`
			`+ sck = 2;`
			`+ mosi = 7;`
			`+ miso = 1;`
			`+;`
			`+`
			`@HAVE_PARPORT_BEGIN@ Inclusion of the following depends on --enable-parport`
			`# Parallel port programmers.`