mirror of
git://projects.qi-hardware.com/ben-blinkenlights.git
synced 2024-11-23 20:33:45 +02:00
swuart/: use a hardware timer and allow full-duplex operation
This commit is contained in:
Werner Almesberger
parent
4689882497
commit
8816dcfa3c
@ -1,5 +1,5 @@
|
||||
CC = mipsel-openwrt-linux-gcc
|
||||
CFLAGS = -g -Wall -I../libubb/include
|
||||
CFLAGS = -g -Wall -O9 -I../libubb/include
|
||||
LDFLAGS = -static
|
||||
LDLIBS = -L../libubb -lubb
|
||||
|
||||
|
||||
259
swuart/swuart.c
259
swuart/swuart.c
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* swuart/swuart.c - Software-implemented half-duplex UART for UBB
|
||||
* swuart/swuart.c - Software-implemented UART for UBB
|
||||
*
|
||||
* Written 2012 by Werner Almesberger
|
||||
* Copyright 2012 Werner Almesberger
|
||||
@ -11,38 +11,221 @@
|
||||
*/
|
||||
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdlib.h>
|
||||
#include <stdio.h>
|
||||
#include <unistd.h>
|
||||
#include <string.h>
|
||||
|
||||
#include <ubb/ubb.h>
|
||||
#include <ubb/regs4740.h>
|
||||
|
||||
|
||||
#define TX UBB_DAT2
|
||||
#define RX UBB_DAT0
|
||||
#define TX UBB_DAT1
|
||||
|
||||
#define TIMER 7
|
||||
|
||||
|
||||
static uint32_t tx_mask, rx_mask;
|
||||
static int loops;
|
||||
static uint32_t ticks;
|
||||
|
||||
|
||||
/* ----- Hardware timer ---------------------------------------------------- */
|
||||
|
||||
|
||||
/*
|
||||
* TX bit timing:
|
||||
*
|
||||
* bps loops nominal estimated measured error
|
||||
* 1152200 202 8.696 us 8.673 us 8.67 us -0.3%
|
||||
* 38400 619 26.042 us 26.062 us 26.04 us n/a
|
||||
* 9600 2494 104.167 us 104.250 us 104.16 us n/a
|
||||
*
|
||||
* Estimated loop timing: 0.25+0.0417*loops
|
||||
* We run the hardware timer at PCLK/16 = 7 MHz. This gives us 60 cycles at
|
||||
* 115200 bps and sets the lowest data rate to 106.8 bps.
|
||||
*/
|
||||
|
||||
#define PCLK (112*1000*1000) /* 112 MHz */
|
||||
#define TCLK (PCLK/16) /* 7 MHz */
|
||||
|
||||
|
||||
static void get_timer(uint32_t cycle)
|
||||
{
|
||||
TSCR = 1 << TIMER; /* enable clock to timer */
|
||||
TDFR(TIMER) = cycle-1; /* cycle = one bit time */
|
||||
TCSR(TIMER) = (2 << 3) | 1; /* count at PCLK/16 */
|
||||
}
|
||||
|
||||
|
||||
static void reset_timer(void)
|
||||
{
|
||||
TECR = 1 << TIMER; /* disable timer */
|
||||
TCNT(TIMER) = 0; /* reset timer */
|
||||
TFCR = 0x10001 << TIMER; /* clear flags */
|
||||
TESR = 1 << TIMER; /* enable timer */
|
||||
}
|
||||
|
||||
|
||||
static void set_half_cycle(uint32_t cycle)
|
||||
{
|
||||
uint32_t t;
|
||||
|
||||
t = (uint16_t) TCNT(TIMER)+(cycle >> 1);
|
||||
/* TCNT+cycle/2 mod cycle-1 */
|
||||
if (t >= cycle-1)
|
||||
t -= cycle-1;
|
||||
TDHR(TIMER) = t;
|
||||
TFCR = 0x10000 << TIMER; /* clear half flags */
|
||||
}
|
||||
|
||||
|
||||
static void release_timer(void)
|
||||
{
|
||||
TECR = 1 << TIMER; /* disable timer */
|
||||
TFCR = 0x10001 << TIMER; /* clear flags */
|
||||
TSSR = 1 << TIMER; /* disable clock to timer */
|
||||
}
|
||||
|
||||
|
||||
static inline bool timer_full(void)
|
||||
{
|
||||
if (!(TFR & (1 << TIMER)))
|
||||
return 0;
|
||||
TFCR = 1 << TIMER;
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
static inline bool timer_half(void)
|
||||
{
|
||||
if (!(TFR & (0x10000 << TIMER)))
|
||||
return 0;
|
||||
TFCR = 0x10000 << TIMER;
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
/* ----- Enable/disable interrupts ----------------------------------------- */
|
||||
|
||||
|
||||
static uint32_t old_icmr;
|
||||
|
||||
|
||||
static void disable_interrupts(void)
|
||||
{
|
||||
old_icmr = ICMR;
|
||||
ICMSR = 0xffffffff;
|
||||
}
|
||||
|
||||
|
||||
static void enable_interrupts(void)
|
||||
{
|
||||
ICMCR = ~old_icmr;
|
||||
}
|
||||
|
||||
|
||||
/* ----- Transmit a block -------------------------------------------------- */
|
||||
|
||||
|
||||
struct rx_err {
|
||||
unsigned glitch; /* unstable start bit */
|
||||
unsigned framing; /* stop bit wasn't "1" */
|
||||
unsigned overflow; /* buffer overflow */
|
||||
} rx_err;
|
||||
|
||||
|
||||
static int trx(uint8_t *out, int out_size, uint8_t *in, int in_size,
|
||||
unsigned wait_bits, unsigned idle_bits)
|
||||
{
|
||||
unsigned tx, rx = 0, idle = 0;
|
||||
int tx_bits = 0, rx_bits = 0;
|
||||
int in_len = 0;
|
||||
|
||||
reset_timer();
|
||||
while (1) {
|
||||
full:
|
||||
/* timer has just crossed FULL */
|
||||
|
||||
if (tx_bits) {
|
||||
if (tx & 1)
|
||||
SET(tx_mask);
|
||||
else
|
||||
CLR(tx_mask);
|
||||
tx >>= 1;
|
||||
tx_bits--;
|
||||
} else {
|
||||
if (out_size) {
|
||||
CLR(tx_mask);
|
||||
tx = *out++ | 0x100;
|
||||
out_size--;
|
||||
tx_bits = 9;
|
||||
} else {
|
||||
if (idle++ == wait_bits)
|
||||
return in_len;
|
||||
}
|
||||
}
|
||||
|
||||
/* wait for reception (if any) */
|
||||
|
||||
if (rx_bits) {
|
||||
while (!timer_half());
|
||||
} else {
|
||||
while (!timer_full())
|
||||
if (!PIN(rx_mask)) {
|
||||
set_half_cycle(ticks);
|
||||
rx_bits = 10;
|
||||
break;
|
||||
}
|
||||
if (!rx_bits)
|
||||
continue;
|
||||
while (!timer_half())
|
||||
if (timer_full())
|
||||
goto full;
|
||||
}
|
||||
|
||||
/* timer has just crossed HALF */
|
||||
|
||||
rx = (rx >> 1) | (PIN(rx_mask) ? 0x200 : 0);
|
||||
if (!--rx_bits) {
|
||||
if (rx & 1) {
|
||||
rx_err.glitch++;
|
||||
} else if (!(rx & 0x200)) {
|
||||
rx_err.framing++;
|
||||
} else if (in_len == in_size) {
|
||||
rx_err.overflow++;
|
||||
} else {
|
||||
*in++ = rx >> 1;
|
||||
in_len++;
|
||||
idle = 0;
|
||||
wait_bits = idle_bits;
|
||||
}
|
||||
}
|
||||
|
||||
while (!timer_full());
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
int swuart_trx(void *out, int out_size, void *in, int in_size,
|
||||
int wait_bits, int idle_bits)
|
||||
{
|
||||
int got;
|
||||
|
||||
disable_interrupts();
|
||||
get_timer(ticks);
|
||||
|
||||
got = trx(out, out_size, in, in_size, wait_bits, idle_bits);
|
||||
|
||||
release_timer();
|
||||
enable_interrupts();
|
||||
|
||||
return got;
|
||||
}
|
||||
|
||||
|
||||
/* ----- Open/close the software UART -------------------------------------- */
|
||||
|
||||
|
||||
int swuart_open(uint32_t tx, uint32_t rx, int bps)
|
||||
{
|
||||
if (ubb_open(0))
|
||||
return -1;
|
||||
|
||||
loops = 24000000/bps-6;
|
||||
ticks = TCLK/bps-1;
|
||||
tx_mask = tx;
|
||||
rx_mask = rx;
|
||||
|
||||
@ -55,47 +238,39 @@ int swuart_open(uint32_t tx, uint32_t rx, int bps)
|
||||
}
|
||||
|
||||
|
||||
static void send(uint8_t *out, int out_size)
|
||||
void swuart_close(void)
|
||||
{
|
||||
const uint8_t *end = out+out_size;
|
||||
unsigned pattern;
|
||||
int i, j;
|
||||
|
||||
while (out != end) {
|
||||
pattern = 0x200 | (*out++ << 1);
|
||||
for (i = 0; i != 10; i++) {
|
||||
if (pattern & 1)
|
||||
SET(tx_mask);
|
||||
else
|
||||
CLR(tx_mask);
|
||||
pattern >>= 1;
|
||||
for (j = 0; j != loops; j++);
|
||||
}
|
||||
}
|
||||
ubb_close(0);
|
||||
}
|
||||
|
||||
|
||||
int swuart_trx(void *out, int out_size, void *in, int in_size, int bit_wait)
|
||||
/* ----- Main -------------------------------------------------------------- */
|
||||
|
||||
|
||||
static void at_exit(void)
|
||||
{
|
||||
uint32_t icmr;
|
||||
|
||||
icmr = ICMR;
|
||||
ICMSR = 0xffffffff;
|
||||
|
||||
send(out, out_size);
|
||||
|
||||
ICMCR = ~icmr;
|
||||
|
||||
return 0;
|
||||
swuart_close();
|
||||
}
|
||||
|
||||
|
||||
int main(int argc, char **argv)
|
||||
{
|
||||
swuart_open(TX, 0, atoi(argv[1]));
|
||||
uint8_t buf[40];
|
||||
int got, i;
|
||||
|
||||
swuart_open(TX, RX, atoi(argv[1]));
|
||||
atexit(at_exit);
|
||||
while (1) {
|
||||
swuart_trx("U ", 2, NULL, 0, 0);
|
||||
got = swuart_trx(argv[2], strlen(argv[2]), buf, sizeof(buf),
|
||||
10000, 100);
|
||||
printf("%d (%d %d %d): ", got,
|
||||
rx_err.glitch, rx_err.framing, rx_err.overflow);
|
||||
for (i = 0; i != got; i++)
|
||||
if (buf[i] >= ' ' && buf[i] <= '~')
|
||||
printf("%c", buf[i]);
|
||||
else
|
||||
printf("\\%02o", buf[i]);
|
||||
printf("\n");
|
||||
usleep(100);
|
||||
}
|
||||
ubb_close(0);
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user