ben-blinkenlights/ubb-la/ubb-la.c

/*
 * ubb-la.c - UBB logic analyzer
 *
 * Written 2013 by Werner Almesberger
 * Copyright 2013 Werner Almesberger
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <stdint.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <math.h>
#include <assert.h>
#include <sys/mman.h>

#include <ubb/ubb.h>
#include <ubb/regs4740.h>
#include <ubb/mmcclk.h>
#include <ubb/physmem.h>


#define	DMA	5

#define	KEY_MASK	0x5fc0000

/*
 * The initial skip is for samples loaded into the FIFO when starting the
 * command, before waiting for the trigger. A completely filled FIFO would
 * hold 16 * 32 bits or 128 samples. In reality, we observe 122 samples for
 * sample rates up to 24 MHz and 123 samples for 42 or 56 MHz.
 */

#define	INITIAL_SKIP	122	/* should be 123 for higher speeds */


/* ----- Enable/disable interrupts ----------------------------------------- */


static uint32_t old_icmr;


static void disable_interrupts(void)
{
	old_icmr = ICMR;
	ICMSR = 0xffffffff;
}


static void enable_interrupts(void)
{
	ICMCR = ~old_icmr;
}


/* ----- DMA control ------------------------------------------------------- */


static uint32_t old_dmac;


static void dma_stop(void)
{
        DCS(DMA) =
            DCS_TT |                    /* Transfer terminated */
            DCS_HLT;                    /* DMA halt */
        DCS(DMA) = 0;                   /* reset DMA channel */
}


static void dma_init(void)
{
	old_dmac = DMAC;

	DMAC = DMAC_DMAE; /* activate the DMA controller (in case it's off) */
	dma_stop();

	DCM(DMA) =
	    DCM_DAI |	/* destination address increment */
	    (DCM_TSZ_32BYTE << DCM_TSZ_SHIFT);
			/* transfer size is 32 bytes */
        DRT(DMA) = DRT_MSC_RX;	/* MSC receive-fifo-full transfer request */
}


static void dma_cleanup(void)
{
	DMAC = old_dmac;
	dma_stop();
}


static void dma_setup(unsigned long buf, int nibbles)
{
	assert(!(nibbles & 63));

/* need to reset DSA, DTA, DTC when done. uncertain about DCS */
	DCS(DMA) = DCS_NDES;			/* no-descriptor transfer */
	DSA(DMA) = REG_PADDR(MSC_RXFIFO);	/* source */
	DTA(DMA) = buf;				/* destination */
	DTC(DMA) = nibbles >> 6;		/* 32 bytes per transfer */
}


static void wait_dma_done(void)
{
	while (!(DCS(DMA) & DCS_TT));
}


/* ----- MMC control ------------------------------------------------------- */


static int xfer(unsigned long buf, int nibbles,
    uint32_t trigger, uint32_t mask)
{
	dma_init();
	dma_setup(buf, nibbles);

	MSC_STRPCL = MSC_STRPCRL_START_CLOCK;	/* start the bus clock */
	MSC_RESTO = MSC_RESTO_MASK;		/* maximum response time-out */
	MSC_RDTO = MSC_RDTO_MASK;
	MSC_BLKLEN = nibbles >> 1;

	MSC_CMDAT =
	    MSC_CMDAT_BUS_WIDTH_4 << MSC_CMDAT_BUS_WIDTH_SHIFT |
	    MSC_CMDAT_DMA_EN |		/* DMA */
	    MSC_CMDAT_DATA_EN |		/* with data transfer */
	    MSC_CMDAT_RESPONSE_FORMAT_NONE; /* no response required */

	MSC_STRPCL = MSC_STRPCRL_START_OP;

	while (MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY);

	IN(UBB_CMD);

	disable_interrupts();

	while ((PDPIN & mask) != trigger)
		if ((PDPIN & KEY_MASK) != KEY_MASK)
			goto quit;

	DCS(DMA) =
	    DCS_NDES |          /* no descriptor */
	    DCS_CTE;            /* enable channel */

	enable_interrupts();

	wait_dma_done();

//printf("MSC_STAT = %08x\n", MSC_STAT);

	dma_cleanup();

	return 1;

quit:
	enable_interrupts();
	dma_cleanup();

	return 0;
}


static void xfers(unsigned long *bufs, int n_bufs, int nibbles,
    const struct mmcclk *clk, const struct mmcclk *fast_clk)
{
	int i = 0;

	dma_init();

	MSC_STRPCL = MSC_STRPCRL_START_CLOCK;	/* start the bus clock */
	MSC_RESTO = MSC_RESTO_MASK;		/* maximum response time-out */
	MSC_RDTO = MSC_RDTO_MASK;
	MSC_BLKLEN = nibbles >> 1;

	MSC_CMDAT =
	    MSC_CMDAT_BUS_WIDTH_4 << MSC_CMDAT_BUS_WIDTH_SHIFT |
	    MSC_CMDAT_DMA_EN |		/* DMA */
	    MSC_CMDAT_DATA_EN |		/* with data transfer */
	    MSC_CMDAT_RESPONSE_FORMAT_NONE; /* no response required */

	disable_interrupts();

	OUT(UBB_CMD);
	dma_setup(bufs[0], nibbles);

	while (1) {
		MSC_STRPCL = MSC_STRPCRL_START_OP;

		MSC_CLKRT = fast_clk->clkrt;
		MSCCDR = 0;

		while (!(MSC_STAT & MSC_STAT_END_CMD_RES));

		IN(UBB_CMD);

		MSCCDR = clk->clkdiv;
		MSC_CLKRT = clk->clkrt;

		DCS(DMA) =
		    DCS_NDES |          /* no descriptor */
		    DCS_CTE;            /* enable channel */

		/*
		 * @@@ We could enable interrupts while waiting, particularly
		 * at low sample rates, as long as the probability of missing
		 * the end of the DMA transfer is acceptably low.
		 */
		wait_dma_done();

		if (++i == n_bufs)
			break;

		OUT(UBB_CMD);
		dma_setup(bufs[i], nibbles);

		while (!(MSC_STAT & MSC_STAT_DATA_TRAN_DONE));
	}

	enable_interrupts();

	dma_cleanup();
}


/* ----- ASCII output ------------------------------------------------------ */


static void print_samples(FILE *file, uint8_t *buf, int skip, int nibbles)
{
	uint8_t v, last = 0xff;
	int i, count = 0;

	for (i = skip; i != nibbles; i++) {
		v = (buf[i >> 1] >> (4*(~i & 1))) & 0xf;
		if (v == last) {
			count++;
		} else {
			switch (count) {
			case 0:
				break;
			case 1:
				printf("%X", last);
				break;
			default:
				printf("%X{%d}", last, count);
				break;
			}
			last = v;
			count = 1;
		}
	}
	if (count == 1)
		printf("%X\n", last);
	else
		printf("%X{%d}\n", last, count);
}


/* ----- Capture ----------------------------------------------------------- */


static int do_buf(int nibbles, uint32_t trigger, uint32_t mask)
{
	uint8_t *buf = physmem_malloc(4096);
	struct physmem_vec vec;
	int n;

	if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
		perror("mlockall");
		exit(1);
	}

	memset(buf, 0, 4096);
	physmem_flush(buf, 4096);

	n = physmem_xlat(buf, nibbles >> 1, &vec, 1);
	if (n != 1) {
		fprintf(stderr, "physmem_xlat_vec: expected 1, got %d\n", n);
		exit(1);
	}
	if (!xfer(vec.addr, nibbles, trigger, mask))
		return 0;

	print_samples(stdout, buf, INITIAL_SKIP, nibbles);

	return 1;
}


static void do_bufs(int n_bufs, int nibbles,
    const struct mmcclk *clk, const struct mmcclk *fast_clk)
{
	uint8_t *bufs[n_bufs];
	struct physmem_vec vecs[n_bufs];
	unsigned long addrs[n_bufs];
	int i,n;

	if (mlockall(MCL_CURRENT | MCL_FUTURE)) {
		perror("mlockall");
		exit(1);
	}

	for (i = 0; i != n_bufs; i++) {
		bufs[i] = physmem_malloc(4096);
		memset(bufs[i], 0, 4096);
		physmem_flush(bufs[i], 4096);

		n = physmem_xlat(bufs[i], nibbles >> 1, vecs+i, 1);
		if (n != 1) {
			fprintf(stderr,
			    "physmem_xlat_vec: expected 1, got %d\n", n);
			exit(1);
		}
		addrs[i] = vecs[i].addr;
	}
	assert(!fast_clk->clkdiv);
	xfers(addrs, n_bufs, nibbles, clk, fast_clk);

	for (i = 0; i != n_bufs; i++)
		print_samples(stdout, bufs[i], 0, nibbles);
}


/* ----- Command-line processing ------------------------------------------- */


/*
 * Among equal bus rates, pick the configuration with the fastest MMC clock.
 * It'll save a few nanoseconds.
 */

static void frequency(struct mmcclk *clk, int hz, int all)
{
	struct mmcclk mmc;

	mmcclk_first(&mmc, 0,
	    MMCCLK_FLAG_RD_ONLY | (all ? MMCCLK_FLAG_ALL : 0));
	*clk = mmc;
	while (mmcclk_next(&mmc))
		if (fabs(clk->bus_clk_hz-hz) > fabs(mmc.bus_clk_hz-hz) ||
		    (fabs(clk->bus_clk_hz-hz) == fabs(mmc.bus_clk_hz-hz) &&
		    clk->clkdiv > mmc.clkdiv))
			*clk = mmc;
}


static unsigned long xlat_pins(unsigned long pins)
{
	if (pins & ~0x1fUL) {
		fprintf(stderr, "invalid trigger set/mask: 0x%lx\n", pins);
		exit(1);
	}
	pins <<= 10;
	if (pins & (0x10 << 10))
		pins = (pins ^ (0x10 << 10)) | UBB_CLK;
	return pins;
}


static void usage(const char *name)
{
	fprintf(stderr,
"usage: %s [-C] [-t pattern/mask] [(-f|-F) frequency_MHz] [-n N]\n\n"
"  -C               output the MMC clock on CLK/TRIG (for debugging)\n"
"  -f freq_MHz      select the specified frequency (default; 1 MHz)\n"
"  -F freq_MHz      like -f, but also allow \"overclocking\"\n"
"  -n N             capture N buffers worth of samples without waiting for a\n"
"                   trigger\n"
"  -t pattern/mask  start capture at the specified pattern (DAT0 = 1, etc.,\n"
"                   CLK = 16). Default: any change on TRIG.\n"
    , name);
	exit(1);
}


int main(int argc, char **argv)
{
	double freq_mhz = 1;
	int all = 0;
	unsigned long trigger = 1, mask = 0;
	unsigned long multi = 0;
	int clkout = 0;
	struct mmcclk clk, fast_clk;
	char *end;
	int c, res;

	while ((c = getopt(argc, argv, "Cf:F:n:t:")) != EOF)
		switch (c) {
		case 'C':
			clkout = 1;
			break;
		case 'F':
			all = 1;
			/* fall through */
		case 'f':
			freq_mhz = strtod(optarg, &end);
			if (*end)
				usage(*argv);
			break;
		case 'n':
			multi = strtoul(optarg, &end, 0);
			if (*end)
				usage(*argv);
			break;
		case 't':
			trigger = strtoul(optarg, &end, 0);
			if (*end != '/')
				usage(*argv);
			mask = strtoul(end+1, &end, 0);
			if (*end)
				usage(*argv);
			trigger = xlat_pins(trigger);
			mask = xlat_pins(mask);
			break;
		default:
			usage(*argv);
		}

	if (optind != argc)
		usage(*argv);

	ubb_open(UBB_ALL);
	PDFUNS = UBB_DAT0 | UBB_DAT1 | UBB_DAT2 | UBB_DAT3;
	if (clkout)
		PDFUNS = UBB_CLK;
	OUT(UBB_CMD);
	CLR(UBB_CMD);
	PDFUNC = UBB_CMD;

	frequency(&clk, 1e6*freq_mhz, all);
	fprintf(stderr, "bus %g MHz controller %g MHz\n", clk.bus_clk_hz/1e6,
	    clk.sys_clk_hz/(clk.clkdiv+1.0)/1e6);
	mmcclk_start(&clk);

	if (trigger == 1) {
		trigger = ~PDPIN & UBB_CLK;
		mask = UBB_CLK;
	}

	if (!multi) {
		res = !do_buf(8128, trigger, mask);
	} else {
		frequency(&fast_clk, 84e6, 1);
		do_bufs(multi, 8128, &clk, &fast_clk);
		res = 0;
	}

	mmcclk_stop();
	ubb_close(UBB_ALL);

	return res;
}