Ben NanoNote Case Scans
Ben NanoNote Case Scans
There are the following categories of scans:
- Assemblies of multiple case parts, such
as the whole device or one part mounted on another.
- Individual case parts.
- High-resolution scans of some details.
May be replaced in the future by scans of the entire area.
- Draft scans that have some anomalies, e.g.,
areas occluded by other components, and will be redone later.
Scans are stored in the following file formats:
PIJ, the binary and proprietary format of Dr.PICZA3 project files,
AutoCAD DXF,
STL,
and the point cloud with comma-separated values.<
PIJ is the native format of the software used to make the scans. STL can
be read by many programs, including
HeeksCAD and
MeshLab.
High resolution scans can produce a large amount of data.
If a file is 1 MB or bigger, its size is indicated.
EOF
# -----------------------------------------------------------------------------
section assemblies "Assemblies of multiple parts"
scan_set ben-bottom "Complete device. Bottom up."
images3
texts3 "1.5 h" "10 h" "53 h"
scan_set ben-bottom-nobat "Battery and cover removed. Bottom up."
images3
texts3 "4 h" "11.5 h" "140 h"
scan_set ben-top "Complete device. From the top."
planned
planned
under_consideration
texts3 "2 h" "10 h" "53 h"
scan_set ben-lcm-asmbly "LCD module on PCB. Display side."
images3
texts3 "1 h" "3 h" "34 h"
# -----------------------------------------------------------------------------
section parts "Individual parts"
scan_set ben-kbd-top "Keyboard. From the top. A-to-L scan."
explain_set <
The scans are also very noisy, probably because the fixture was not
rigid enough.
EOF
images3
texts3 "1 h" "2.25 h" "36 h"
scan_set ben-batcvr-outside "Battery cover. Outside."
images3
texts3 "1.5 h" "3 h" "20 h"
scan_set ben-batcvr-inside "Battery cover. Inside."
images3
texts3 "1.5 h" "5 h" "33.5 h"
scan_set ben-pcb-comp "Main PCB. Component side."
images2
texts2 "2.5 h" "8.5 h"
scan_set ben-dispshell-outside "Display, outer shell. Outside."
images3
texts3 "1 h" "5 h" "44.5 h"
scan_set ben-dispshell-inside "Display, outer shell. Inside."
in_progress
planned
planned
texts3 "1 h" "5 h" "45 h"
scan_set ben-dispbase-front "Display shell, base structure. Front side."
explain_set <speaker and the hinge to hold the PCB down."
scan_text ben-pcb-central-support-100um "0.25 h"
# -----------------------------------------------------------------------------
section drafts "Drafts, for later rescan"
scan_set ben-bottom-inside "Bottom shell without battery cover. Inside."
explain_set <
These scans were made with the display shell attached and therefore don't
show the hinge correctly.
Please use the ben-bottom-inside2
series instead.
EOF
images2
texts2 "4 h" "14 h"
scan_set ben-bottom-pcb "Bottom shell plus PCB. Keyboard side."
explain_set <