qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-12-24 00:54:15 +02:00
Code
227bed1366
ben-wpan/atusb/atusb.cmp

242 lines
3.6 KiB
Plaintext
Raw Normal View History

atusb: slightly adjusted some component values for easier sourcing - usb.sch (R1): changed from 68 Ohm to 180 Ohm, to decrease BOM size - atrf.sch (C17): changed from 1 pF to 2.2 pF (value is more common, and it can only help to reduce harmonics) - atusb.sch, usb.sch, atrf.sch: bumped version to 20110214 - atusb.cmp: updated
2011-02-14 06:55:46 +02:00
Cmp-Mod V01 Created by CvPCB (2010-12-27 BZR 2685)-unstable date = Mon Feb 14 01:54:39 2011
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
BeginCmp
TimeStamp = /4C609C08/4C63FE17;
Reference = ANT1;
ValeurCmp = 50R;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
IdModule = MEANDER-110;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
BeginCmp
TimeStamp = /4C609C08/4CF4B034;
Reference = B1;
ValeurCmp = 2450FB15L0001;
IdModule = 0805-6;
EndCmp
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
BeginCmp
TimeStamp = /4C609BEF/4C6401AA;
Reference = C1;
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
ValeurCmp = 10uF;
IdModule = 0603;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6401B3;
Reference = C2;
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
ValeurCmp = 1uF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641710;
Reference = C3;
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
ValeurCmp = 22pF/RF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641506;
Reference = C8;
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
ValeurCmp = 22pF/RF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641509;
Reference = C9;
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
ValeurCmp = 22pF/RF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A76;
Reference = C10;
ValeurCmp = 1uF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641004;
Reference = C11;
ValeurCmp = 1uF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A84;
Reference = C12;
ValeurCmp = 1uF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A7E;
Reference = C13;
ValeurCmp = 1uF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A73;
Reference = C14;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = 12pF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A7B;
Reference = C15;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = 12pF;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
BeginCmp
TimeStamp = /4C609C08/4D3B018B;
Reference = C16;
ValeurCmp = NC;
IdModule = 0402;
EndCmp
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
BeginCmp
TimeStamp = /4C609C08/4D425FF1;
Reference = C17;
atusb: slightly adjusted some component values for easier sourcing - usb.sch (R1): changed from 68 Ohm to 180 Ohm, to decrease BOM size - atrf.sch (C17): changed from 1 pF to 2.2 pF (value is more common, and it can only help to reduce harmonics) - atusb.sch, usb.sch, atrf.sch: bumped version to 20110214 - atusb.cmp: updated
2011-02-14 06:55:46 +02:00
ValeurCmp = 2.2pF;
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
IdModule = 0402;
EndCmp
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
BeginCmp
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
TimeStamp = /4C609BEF/4CF4AD1B;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
Reference = CON1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = USB_A_PLUG_;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
IdModule = USB-A-PLUG-SMT;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6402EE;
Reference = D1;
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
ValeurCmp = LTST-C190KRKT;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0603;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6401FE;
Reference = P11;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640200;
Reference = P12;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640202;
Reference = P13;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640203;
Reference = P14;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
TimeStamp = /4C609BEF/4D425D53;
Reference = P15;
ValeurCmp = CONN_1;
IdModule = PAD_60x60;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4D425D62;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
Reference = P16;
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
ValeurCmp = CONN_1;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
IdModule = PAD_60x60;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6402F2;
Reference = R1;
atusb: slightly adjusted some component values for easier sourcing - usb.sch (R1): changed from 68 Ohm to 180 Ohm, to decrease BOM size - atrf.sch (C17): changed from 1 pF to 2.2 pF (value is more common, and it can only help to reduce harmonics) - atusb.sch, usb.sch, atrf.sch: bumped version to 20110214 - atusb.cmp: updated
2011-02-14 06:55:46 +02:00
ValeurCmp = 180;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
TimeStamp = /4C609C08/4CF4B07E;
Reference = R3;
ValeurCmp = 0R;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
TimeStamp = /4C609BEF/4D4258D9;
Reference = R4;
ValeurCmp = 22;
IdModule = 0402;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4D4258DC;
Reference = R5;
ValeurCmp = 22;
IdModule = 0402;
EndCmp
BeginCmp
TimeStamp = /4C609C08/4D425FEE;
Reference = R6;
ValeurCmp = 180;
IdModule = 0402;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4D425860;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
Reference = U1;
atusb: new layout for the ATmega32U2 - atusb.pro, atusb.cmp: updated for ATmega32U2-based design - usb.sch: rearranged LED, nRST_RF, and SLP_TR, to make layout easier - atusb.brd: redid layout for the ATmega32U2-based design
2011-01-31 09:57:02 +02:00
ValeurCmp = ATMEGA32U2;
IdModule = QFN32-VHHD-2;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
TimeStamp = /4C609C08/4D229690;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
Reference = U2;
atusb: introduced optional antenna matching capacitor - atrf.sch (C16): optional antenna matching capactor (typ. 0.5 pF) - atben.cmp, atben.brd: added C16
2011-01-22 18:22:58 +02:00
ValeurCmp = AT86RF231;
atusb: updated C8051F326 and AT86RF321 footprints - usb.sch, atusb.cmp, atusb.brd: updated C8051F326 footprint - atrf.sch, atusb.cmp, atusb.brd: updated AT86F231 footprint - atusb.brd: redid some traces that mysteriously got disconnected
2011-01-23 06:32:14 +02:00
IdModule = QFN32-VHHD-6;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6402FB;
Reference = VR1;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
ValeurCmp = 5V6;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640343;
Reference = VR2;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
ValeurCmp = 5V6;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C64034D;
Reference = VR3;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
ValeurCmp = 5V6;
atusb: replaced old chip components with updated ones - atusb.brd, atusb.cmp: changed all 0402-M to the new 0402 - atusb.brd, atusb.cmp: changed 0603-M to the new 0603 - atusb.brd: updated layout for component changes
2011-01-22 17:53:47 +02:00
IdModule = 0402;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C63FA9F;
Reference = X1;
ValeurCmp = 16MHz;
IdModule = xtal4-3.2mmx2.5mm;
EndCmp
EndListe
Copy Permalink