ben-wpan/modules/INFO

#
# Tags:
#
# F	Footprint name (must be first)
# N	Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)
#

# TI meandered inverted F antenna
F: meander
N: AN043

# Common 4-pin crystal SMT package (pins 1 and 4 are on a short side, pin
# numbering is counter-clockwise)
F: xtal-4
N: nx3225sa

# 0805 package with six pads
F: 0805-6

#
# MMCX board-edge (SMT) female jack
#
# Design based on Molex 73415-0961, This is also compatible with:
#
# Tyco 1408152-1
# Emerson 135-3711-801
# Molex 73415-1261
# Amphenol 262107
#
# Note: footprint changes with PCB thickness !
#
# Known bugs:
# - keepout area marker should be on comment layer
# - pin 2 should be off-center and extend such that proper trace can be
#   connected directly
#
F: mmcx-f-edge
N: 73415-0961

# SOT-323 package with counter-clockweise or clockwise pin assignment
F: sot-323
N: mmst3904

# U.FL/Micro Coax/... receptacle
F: u-fl-receptacle
N: u.fl-receptacle
Meandered inverted F PCB antenna from TI's AN043. 2010-08-09 07:17:33 +03:00			`#`
			`# Tags:`
			`#`
			`# F Footprint name (must be first)`
Added a data sheet viewer. It improves upon the design used in gta02-core by allowing a hierarchy of caches, by using only one directory for each cache, and by putting only one command in the PATH. - scripts/dsv: new and improved data sheet viewer (successor of gta02-core's dsv) - Makefile: added "dsv" target to update the bookshelf - ds/INFO, components/INFO, modules/INFO: ds/INFO moved to BOOKSHELF - components/INFO, modules/INFO: renamed "D" tag to "N", for consistency with BOOKSHELF - BOOKSHELF: changed "stdpass" URL to the actual PDF 2010-08-10 18:26:24 +03:00			`# N Data sheet identifier (N tag of BOOKSHELF; can be omitted if equal to F)`
Meandered inverted F PCB antenna from TI's AN043. 2010-08-09 07:17:33 +03:00			`#`

			`# TI meandered inverted F antenna`
			`F: meander`
Added a data sheet viewer. It improves upon the design used in gta02-core by allowing a hierarchy of caches, by using only one directory for each cache, and by putting only one command in the PATH. - scripts/dsv: new and improved data sheet viewer (successor of gta02-core's dsv) - Makefile: added "dsv" target to update the bookshelf - ds/INFO, components/INFO, modules/INFO: ds/INFO moved to BOOKSHELF - components/INFO, modules/INFO: renamed "D" tag to "N", for consistency with BOOKSHELF - BOOKSHELF: changed "stdpass" URL to the actual PDF 2010-08-10 18:26:24 +03:00			`N: AN043`
Reuse some symbols and footprints from IDBG and gta02-core. 2010-08-09 21:48:06 +03:00
Added NX3225SA 16 MHz crystal (symbol and footprint) - BOOKSHELF: data sheet of NDK NX3225SA 16 MHz, 15 ppm, 8 pF crystal - AUTHORS, components/INFO, components/xtal-4.lib: copied Alvaro's tas4025a.lib over from gta02-core and gave it a more general name - AUTHORS, modules/INFO, modules/xtal-4.fpd: added footprint for four-padded SMT crystals 2010-08-12 16:33:59 +03:00			`# Common 4-pin crystal SMT package (pins 1 and 4 are on a short side, pin`
			`# numbering is counter-clockwise)`
			`F: xtal-4`
			`N: nx3225sa`
Added modules for test points and solder pads. Some cleanup. - AUTHORS, modules/INFO, modules/Makefile, modules/pads.fpd: added pads - modules/Makefile: added forgotten "qfn" module - modules/xtal-4.fpd: renamed crystal module from xtal-4-* to xtal4-*, for clarity 2010-08-12 21:28:03 +03:00
Added components (transistor and balun) for the uSD variant. - atusd/Makefile: - AUTHORS, atusd/Makefile, atusd/dtc123.lib, atusd/dtc123je.fpd: borrowed the DTC123 symbol (Alvaro Lopes) and footprint (Dave Ball) from gta02-core. Note that this isn't the part I'm using in my prototype, and I'm trying to get rid of it entirely, so all this will change before too long. - components/BOOKSHELF, components/INFO, components/balun.lib, modules/Makefile, modules/INFO, modules/0805-6.fpd: added the Wuerth 748421245 balun makefile 2010-09-03 00:05:15 +03:00			`# 0805 package with six pads`
			`F: 0805-6`
Added (partially incorrect, see INFO) footprint of F MMCX board edge connector - AUTHORS, modules/INFO, modules/mmcx-f-edge.fpd: MMCX female SMT board edge connector (not entirely correct, due to limitations of fped) - BOOKSHELF: added Molex 73415-0961 data sheet 2010-10-24 07:42:53 +03:00
			`#`
			`# MMCX board-edge (SMT) female jack`
			`#`
			`# Design based on Molex 73415-0961, This is also compatible with:`
			`#`
			`# Tyco 1408152-1`
			`# Emerson 135-3711-801`
			`# Molex 73415-1261`
			`# Amphenol 262107`
			`#`
			`# Note: footprint changes with PCB thickness !`
			`#`
			`# Known bugs:`
			`# - keepout area marker should be on comment layer`
			`# - pin 2 should be off-center and extend such that proper trace can be`
			`# connected directly`
			`#`
			`F: mmcx-f-edge`
			`N: 73415-0961`
Added Molex 0480371000 USB A plug (SMT) - AUTHORS, components/INFO, components/usb_a_plug.lib, components/usb_a_plug.dcm: added symbol for USB A plug - AUTHORS, modules/INFO, modules/usb_a_plug_smt.fpd: added footprint for USB A plug - BOOKSHELF: added Molex 0480371000 USB A plug for SMT - AUTHORS: corrected type in file extension of modules/xtal-4.fpd (was .fpg) 2010-10-25 08:00:10 +03:00
SOT-323 footprint for MMST3904 NPN transistor (use NPN standard symbol) - AUTHORS, modules/INFO, modules/Makefile, modules/sot-323.fpd: footprint for SOT-323 package with clockwise (normal) or counter-clockwise (transistors) pin numbering - BOOKSHELF: added MMST3904 NPN small signal transistor 2010-10-25 10:09:08 +03:00			`# SOT-323 package with counter-clockweise or clockwise pin assignment`
			`F: sot-323`
			`N: mmst3904`
Added footprint for U.FL (micro coax) receptacle. 2010-11-06 03:22:25 +02:00
			`# U.FL/Micro Coax/... receptacle`
KiCad dislikes dots in file names: renamed u.fl-receptacle to u-fl-receptacle 2010-11-06 05:35:11 +02:00			`F: u-fl-receptacle`
			`N: u.fl-receptacle`