ben-wpan/atben/cam/mkmk

#!/bin/sh -e
PATH=$PATH:/home/qi/cae-tools/cameo
PATH=$PATH:/home/moko/svn.openmoko.org/developers/werner/cncmap/gp2rml

NAME=atben
X0=8.6mm
Y0=7.1mm
X=0
Y=0

cameo <<EOF
mm

gerber 35mil ../$NAME-PCB_Edges.gbr
align 1 $X0 $Y0		# align relative to board corner
translate 4mm 4mm	# move to PCB zone assigned to project
#translate 40mm 0mm	# skip over previous boards
array +19mm +2.5mm $X $Y

z 0 -58.9mm		# board surface (tool fully retracted)
z 1.5mm			# slack for extending the tool
z -0.8mm		# board thickness
z -0.5mm		# tool extra depth
clear

# ---- 1st board ----

excellon ../$NAME.drl
drill 7mil 15mil	# 12.5-13.5 mil drill
optimize
write drill.gp

remainder
mill 20mil 0.01mm	# 35 mil endmill; pretend it is a little smaller,
			# to compensate for tool/board deflections
write mill.gp

remainder
empty

gerber 20mil ../$NAME-PCB_Edges.gbr	# 35 mil endmill, 15 mil deflection
offset
append mill.gp

clear

# ---- 2nd board ----

reset

gerber 35mil ../$NAME-PCB_Edges.gbr
rotate 180

align 1 $X0 $Y0		# align relative to board corner
translate 4mm 4mm	# move to PCB zone assigned to project
#translate 40mm 0mm	# skip over previous boards
translate 15mm 0mm
array +19mm +2.5mm $X $Y

clear

excellon ../$NAME.drl
drill 7mil 15mil	# 12.5-13.5 mil drill
optimize
append drill.gp

remainder
mill 20mil 0.01mm	# 35 mil endmill; pretend it is a little smaller,
			# to compensate for tool/board deflections
append mill.gp

remainder
empty

gerber 20mil ../$NAME-PCB_Edges.gbr	# 35 mil endmill, 15 mil deflection
offset
append mill.gp
EOF


gp2rml 2 0.5 0.5 mill.gp >mill.rml
gp2rml 2 0.1 0.5 drill.gp >drill.rml


cat <<EOF >Makefile.mkmk
SPOOL=/home/moko/svn.openmoko.org/developers/werner/cncmap/spool/spool
CNGT=/home/qi/cae-tools/cngt/cngt

.PHONY:		mill drill cng plot dplot

mill:
		PORT=/dev/ttyUSB0 \$(SPOOL) mill.rml

drill:
		PORT=/dev/ttyUSB0 \$(SPOOL) drill.rml

cng:
		\$(CNGT) -57.4 20 mill.gp

plot:
		echo 'plot "drill.gp" with points, "mill.gp" with lines' | \\
		  gnuplot -persist

dplot:
		echo 'plot "< sed /^\$\$/d drill.gp" with linespoints' | \\
		  gnuplot -persist

clean::
		rm -f mill.gp mill.rml drill.gp drill.rml
EOF
atusd/cam: updated to use cameo - cam/pcb.pl, cam/doit: deleted - cam/mkmk: CAM translation and conversion process 2011-01-06 04:12:35 +02:00			`#!/bin/sh -e`
			`PATH=$PATH:/home/qi/cae-tools/cameo`
			`PATH=$PATH:/home/moko/svn.openmoko.org/developers/werner/cncmap/gp2rml`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`NAME=atben`
Updates CAM processes of various sub-projects - atben/cam/mkmk: introduced variables for board corner - atben/cam/mkmk: updated for new raw board - atusb-pgm/cam/Makefile: updated for new board - atusb/cam/Makefile: introduced abstraction with $(NAME) - atusb/cam/Makefile: use cameo/templates/mkmk-simple instead of local mkmk - atusb/cam/mkmk: removed - atusb/cam/Makefile: updated for new board 2011-02-22 04:31:04 +02:00			`X0=8.6mm`
			`Y0=7.1mm`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00			`X=0`
atben/cam/mkmk: updated for latest board parameters 2011-01-28 08:48:03 +02:00			`Y=0`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00
atusd/cam: updated to use cameo - cam/pcb.pl, cam/doit: deleted - cam/mkmk: CAM translation and conversion process 2011-01-06 04:12:35 +02:00			`cameo <<EOF`
			`mm`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`gerber 35mil ../$NAME-PCB_Edges.gbr`
Updates CAM processes of various sub-projects - atben/cam/mkmk: introduced variables for board corner - atben/cam/mkmk: updated for new raw board - atusb-pgm/cam/Makefile: updated for new board - atusb/cam/Makefile: introduced abstraction with $(NAME) - atusb/cam/Makefile: use cameo/templates/mkmk-simple instead of local mkmk - atusb/cam/mkmk: removed - atusb/cam/Makefile: updated for new board 2011-02-22 04:31:04 +02:00			`align 1 $X0 $Y0 # align relative to board corner`
atben/cam/mkmk: updated for latest board parameters 2011-01-28 08:48:03 +02:00			`translate 4mm 4mm # move to PCB zone assigned to project`
Updates CAM processes of various sub-projects - atben/cam/mkmk: introduced variables for board corner - atben/cam/mkmk: updated for new raw board - atusb-pgm/cam/Makefile: updated for new board - atusb/cam/Makefile: introduced abstraction with $(NAME) - atusb/cam/Makefile: use cameo/templates/mkmk-simple instead of local mkmk - atusb/cam/mkmk: removed - atusb/cam/Makefile: updated for new board 2011-02-22 04:31:04 +02:00			`#translate 40mm 0mm # skip over previous boards`
atusd: use crystal instead of trying to obtain an external clock from the Ben Known bug: didn't connect SLP_TR. - atusd.sch, atusd.brd: replaced external clock with crystal - atusd.sch, atusd.brd: increased version number to 20110115 - atusd.brd: changed "ATUSD" text on PCB to "8:10 CARD" 2011-01-15 21:35:37 +02:00			`array +19mm +2.5mm $X $Y`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00
atusd/cam: updated to use cameo - cam/pcb.pl, cam/doit: deleted - cam/mkmk: CAM translation and conversion process 2011-01-06 04:12:35 +02:00			`z 0 -58.9mm # board surface (tool fully retracted)`
			`z 1.5mm # slack for extending the tool`
			`z -0.8mm # board thickness`
			`z -0.5mm # tool extra depth`
			`clear`

atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00			`# ---- 1st board ----`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`excellon ../$NAME.drl`
atusd/cam: updated to use cameo - cam/pcb.pl, cam/doit: deleted - cam/mkmk: CAM translation and conversion process 2011-01-06 04:12:35 +02:00			`drill 7mil 15mil # 12.5-13.5 mil drill`
			`optimize`
			`write drill.gp`

			`remainder`
			`mill 20mil 0.01mm # 35 mil endmill; pretend it is a little smaller,`
			`# to compensate for tool/board deflections`
			`write mill.gp`

			`remainder`
			`empty`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`gerber 20mil ../$NAME-PCB_Edges.gbr # 35 mil endmill, 15 mil deflection`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00			`offset`
			`append mill.gp`

			`clear`

			`# ---- 2nd board ----`

			`reset`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`gerber 35mil ../$NAME-PCB_Edges.gbr`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00			`rotate 180`

Updates CAM processes of various sub-projects - atben/cam/mkmk: introduced variables for board corner - atben/cam/mkmk: updated for new raw board - atusb-pgm/cam/Makefile: updated for new board - atusb/cam/Makefile: introduced abstraction with $(NAME) - atusb/cam/Makefile: use cameo/templates/mkmk-simple instead of local mkmk - atusb/cam/mkmk: removed - atusb/cam/Makefile: updated for new board 2011-02-22 04:31:04 +02:00			`align 1 $X0 $Y0 # align relative to board corner`
atben/cam/mkmk: updated for latest board parameters 2011-01-28 08:48:03 +02:00			`translate 4mm 4mm # move to PCB zone assigned to project`
Updates CAM processes of various sub-projects - atben/cam/mkmk: introduced variables for board corner - atben/cam/mkmk: updated for new raw board - atusb-pgm/cam/Makefile: updated for new board - atusb/cam/Makefile: introduced abstraction with $(NAME) - atusb/cam/Makefile: use cameo/templates/mkmk-simple instead of local mkmk - atusb/cam/mkmk: removed - atusb/cam/Makefile: updated for new board 2011-02-22 04:31:04 +02:00			`#translate 40mm 0mm # skip over previous boards`
atusd: use crystal instead of trying to obtain an external clock from the Ben Known bug: didn't connect SLP_TR. - atusd.sch, atusd.brd: replaced external clock with crystal - atusd.sch, atusd.brd: increased version number to 20110115 - atusd.brd: changed "ATUSD" text on PCB to "8:10 CARD" 2011-01-15 21:35:37 +02:00			`translate 15mm 0mm`
			`array +19mm +2.5mm $X $Y`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00
			`clear`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`excellon ../$NAME.drl`
atusd/cam/mkmk: updated for making the 20110104 prototypes 2011-01-09 23:59:57 +02:00			`drill 7mil 15mil # 12.5-13.5 mil drill`
			`optimize`
			`append drill.gp`

			`remainder`
			`mill 20mil 0.01mm # 35 mil endmill; pretend it is a little smaller,`
			`# to compensate for tool/board deflections`
			`append mill.gp`

			`remainder`
			`empty`

great atusd -> atben renaming: updated references in atben/cam/ - Makefile: changed "atusd" to $(NAME) - mkmk: changed "atusd" to $NAME 2011-01-17 16:36:54 +02:00			`gerber 20mil ../$NAME-PCB_Edges.gbr # 35 mil endmill, 15 mil deflection`
atusd/cam: updated to use cameo - cam/pcb.pl, cam/doit: deleted - cam/mkmk: CAM translation and conversion process 2011-01-06 04:12:35 +02:00			`offset`
			`append mill.gp`
			`EOF`


			`gp2rml 2 0.5 0.5 mill.gp >mill.rml`
			`gp2rml 2 0.1 0.5 drill.gp >drill.rml`


			`cat <<EOF >Makefile.mkmk`
			`SPOOL=/home/moko/svn.openmoko.org/developers/werner/cncmap/spool/spool`
			`CNGT=/home/qi/cae-tools/cngt/cngt`

			`.PHONY: mill drill cng plot dplot`

			`mill:`
			`PORT=/dev/ttyUSB0 \$(SPOOL) mill.rml`

			`drill:`
			`PORT=/dev/ttyUSB0 \$(SPOOL) drill.rml`

			`cng:`
			`\$(CNGT) -57.4 20 mill.gp`

			`plot:`
			`echo 'plot "drill.gp" with points, "mill.gp" with lines' \| \\`
			`gnuplot -persist`

			`dplot:`
			`echo 'plot "< sed /^\$\$/d drill.gp" with linespoints' \| \\`
			`gnuplot -persist`

			`clean::`
			`rm -f mill.gp mill.rml drill.gp drill.rml`
			`EOF`