qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-23 05:42:28 +02:00
Code
8710be5665
ben-wpan/usrp/sps/row

88 lines
1.8 KiB
Plaintext
Raw Normal View History

usrp/sps/: spectrum scan utilities (work in progress) - collect: set up a test transmission at each available frequency, then then record the signal seen by the USRP2 - norm: extract parameters necessary for normalization - viz: visualize the spectrum with gnuplot - row: generate rows of spectra with "viz"
2011-03-04 04:26:31 +02:00
#!/bin/sh
export GDFONTPATH
GDFONTPATH=$GDFONTPATH:/usr/share/fonts/truetype/ttf-liberation/
usrp/sps/: use PATH instead of hard-coding relative paths in invocations
2011-03-06 21:47:21 +02:00
PATH=.:$PATH
usrp/sps/: spectrum scan utilities (work in progress) - collect: set up a test transmission at each available frequency, then then record the signal seen by the USRP2 - norm: extract parameters necessary for normalization - viz: visualize the spectrum with gnuplot - row: generate rows of spectra with "viz"
2011-03-04 04:26:31 +02:00
if ! [ "$1" ]; then
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
echo "usage: $0 prefix ..." 1>&2
usrp/sps/: spectrum scan utilities (work in progress) - collect: set up a test transmission at each available frequency, then then record the signal seen by the USRP2 - norm: extract parameters necessary for normalization - viz: visualize the spectrum with gnuplot - row: generate rows of spectra with "viz"
2011-03-04 04:26:31 +02:00
exit 1
fi
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
cat <<EOF
<HTML>
<TABLE cellpadding="0" cellspacing="0">
EOF
usrp/sps/: spectrum scan utilities (work in progress) - collect: set up a test transmission at each available frequency, then then record the signal seen by the USRP2 - norm: extract parameters necessary for normalization - viz: visualize the spectrum with gnuplot - row: generate rows of spectra with "viz"
2011-03-04 04:26:31 +02:00
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
last=
for prefix in "$@"; do
echo $prefix 1>&2
usrp/sps/: spectrum scan utilities (work in progress) - collect: set up a test transmission at each available frequency, then then record the signal seen by the USRP2 - norm: extract parameters necessary for normalization - viz: visualize the spectrum with gnuplot - row: generate rows of spectra with "viz"
2011-03-04 04:26:31 +02:00
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
if [ "${last%-*}" = "${prefix%-*}" ]; then
color=
else
color=' bgcolor="#a0e0ff"'
fi
last=$prefix
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
usrp/sps/: removed "Offset" from header, added 0 dB line to peak power overview - row: the "Offset" header looked very crowded; removed it - vizp: draw the x axis (0 dB) as solid black
2011-03-06 02:06:12 +02:00
echo "<TR$color><TH>$prefix<TD>"
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
f=2405
while [ $f -le 2480 ]; do
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
echo "<TD align=\"center\">$f MHz"
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
f=`expr $f + 5`
done
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
echo "<TR>"
echo "<TD><A href=\"$prefix.png\"><IMG src=\"$prefix-small.png\"></A>"
echo "<TD align="right">-0.5 MHz"
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
>_peak
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
f=2405
while [ $f -le 2480 ]; do
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
echo -n "$f " >>_peak
usrp/sps/: use PATH instead of hard-coding relative paths in invocations
2011-03-06 21:47:21 +02:00
viz -f LiberationSans-Bold -m -p $prefix-$f.png \
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
-o $f.fft $prefix $f >>_peak
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
convert -resize '15%' $prefix-$f.png $prefix-$f-small.png
echo "<TD><A href=\"$prefix-$f.png\"><IMG src=\"$prefix-$f-small.png\"></A>"
f=`expr $f + 5`
done
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
echo "<TR>"
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
echo "<TD><A href=\"$prefix-peak.png\"><IMG src=\"$prefix-peak-small.png\"></A>"
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
echo "<TD align="right">+0.5 MHz"
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
f=2405
while [ $f -le 2480 ]; do
f1=`expr $f + 1`
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
echo -n "$f1 " >>_peak
usrp/sps/: use PATH instead of hard-coding relative paths in invocations
2011-03-06 21:47:21 +02:00
viz -f LiberationSans-Bold -m -p $prefix-$f1.png \
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
-o $f1.fft $prefix $f1 >>_peak
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
convert -resize '15%' $prefix-$f1.png $prefix-$f1-small.png
echo "<TD><A href=\"$prefix-$f1.png\"><IMG src=\"$prefix-$f1-small.png\"></A>"
f=`expr $f + 5`
done
usrp/sps/: spectrum scan utilities (work in progress) - collect: set up a test transmission at each available frequency, then then record the signal seen by the USRP2 - norm: extract parameters necessary for normalization - viz: visualize the spectrum with gnuplot - row: generate rows of spectra with "viz"
2011-03-04 04:26:31 +02:00
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
ffts=`
f=2405
while [ $f -le 2480 ]; do
echo $f.fft
echo \`expr $f + 1\`.fft
f=\`expr $f + 5\`
done`
usrp/sps/: use PATH instead of hard-coding relative paths in invocations
2011-03-06 21:47:21 +02:00
range >_tmp
vizr -f LiberationSans-Bold -p $prefix.png $prefix _tmp
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
rm -f $ffts _tmp
convert -resize '15%' $prefix.png $prefix-small.png
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
sort -n _peak >_tmp
usrp/sps/: use PATH instead of hard-coding relative paths in invocations
2011-03-06 21:47:21 +02:00
vizp -f LiberationSans-Bold -p $prefix-peak.png $prefix _tmp
usrp/sps/: added peak power summary graph - vizp: plot the peak power - row: retrieve peak power from "viz" (with -m) and use it to generate the summary - vizr: corrected typo in prefix argument number
2011-03-06 01:25:27 +02:00
rm -f _peak _tmp
convert -resize '15%' $prefix-peak.png $prefix-peak-small.png
usrp/sps/: added min/avg/max summary image - range: generate min/avg/max data from FFT files - vizr: plot the output of "range" - row: make "viz" keep the FFT output and use it to generate the summary
2011-03-06 00:34:07 +02:00
done
usrp/sps: further improved scripts, added Makefile - Makefile (index): generate an illustrated index of all the measurement runs - Makefile (upload): upload images and index to downloads.qi-hardware.com - collect: added optional directory argument, for cases where the destination directory differs from the local directory - collect: hard-coded remote host to run usrp2_rx_cfile.py at - collect: added . to PATH, for execution of a local copy of atrf-txrx - row: generate entire HTML page, not just the table entries - row: accept a list of prefixes to iterate through - row: highlight rows starting a "new" prefix - viz: corrected sprintf formats from +%...f to %+...f - viz: show negative peak power in red
2011-03-05 01:28:59 +02:00
cat <<EOF
</TABLE>
EOF
Copy Permalink