qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-09 10:36:15 +02:00
Code
a37bba8755
ben-wpan/atusb/atusb.sch

92 lines
1.8 KiB
Plaintext
Raw Normal View History

atusb/: swapped C10 and C13 in schematics, to match layout - atrf.sch: C10 (EVDD bypass) and C13 (DEVDD bypass) had their roles swapped in the layout. Swapped them in the schematics to match the layout. - atusb.brd: updated the netlist - atusb.sch, usb.sch: commit noise
2011-05-27 10:29:01 +03:00
EESchema Schematic File Version 2 date Fri May 27 04:26:53 2011
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm
2010-08-10 03:31:23 +03:00
LIBS:power
LIBS:device
LIBS:conn
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104
2011-01-04 06:19:54 +02:00
LIBS:at86rf231
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup)
2011-01-28 08:42:35 +02:00
LIBS:atmega8u2
atusb: remove two unnecessary test points - atrf.sch (P15): removed TST test point - usb.sch (P10): removed nSYSCLK test point - atusb.sch: commit noise
2010-12-01 18:28:05 +02:00
LIBS:usb_a_plug
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive
2010-08-12 19:09:36 +03:00
LIBS:xtal-4
LIBS:antenna
atusb: remove two unnecessary test points - atrf.sch (P15): removed TST test point - usb.sch (P10): removed nSYSCLK test point - atusb.sch: commit noise
2010-12-01 18:28:05 +02:00
LIBS:balun-smt6
atusb: varistor Vdc was off by 100 mV; made it clearer that we use Vdc, not Vb - atusb/atusb.sch, atusb/usb.sch, atusb/atrf.sch: bumped schematics version to 20110519 - atusb/usb.sch (VR1, VR2, VR3): changed voltage from 5.6 V to 5.5 V - atusb/usb.sch (VR1, VR2, VR3): clarified that the voltage is Vdc, not Vb - bom/atrf.chr (AVR-M1005C080MTACB): Vdc is 5.5 V, not 5.6 V - bom/atrf.sub (VR[0-9]*): allow #.#Vdc as an alternative to #V#
2011-05-19 20:23:33 +03:00
LIBS:atusb-cache
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive
2010-08-12 19:09:36 +03:00
EELAYER 24 0
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm
2010-08-10 03:31:23 +03:00
EELAYER END
$Descr A4 11700 8267
Sheet 1 3
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104
2011-01-04 06:19:54 +02:00
Title "IEEE 802.15.4 USB Transceiver (AT86RF231)"
atusb/: swapped C10 and C13 in schematics, to match layout - atrf.sch: C10 (EVDD bypass) and C13 (DEVDD bypass) had their roles swapped in the layout. Swapped them in the schematics to match the layout. - atusb.brd: updated the netlist - atusb.sch, usb.sch: commit noise
2011-05-27 10:29:01 +03:00
Date "27 may 2011"
Rev "20110527"
Added title, author, and revision to all schematics and layouts. - atrf/wpan-atrf.sch, atrf/usb.sch, atrf/atrf.sch, atrf/wpan-atrf.brd: added title, author, and revision (100820) - cntr/cntr.sch, cntr/cntr.brd: added title, author, and revision (1)
2010-08-26 01:42:46 +03:00
Comp "Werner Almesberger"
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm
2010-08-10 03:31:23 +03:00
Comment1 ""
Comment2 ""
Comment3 ""
Comment4 ""
$EndDescr
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup)
2011-01-28 08:42:35 +02:00
Wire Wire Line
4350 5050 7350 5050
Wire Wire Line
10000 6100 10000 6300
Wire Wire Line
7350 4700 4350 4700
Wire Wire Line
7350 4300 4350 4300
Wire Wire Line
7350 4000 4350 4000
Wire Wire Line
7350 3850 4350 3850
Wire Wire Line
7350 4150 4350 4150
Wire Wire Line
7350 4500 4350 4500
Wire Wire Line
7350 4850 4350 4850
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104
2011-01-04 06:19:54 +02:00
$Sheet
S 2300 3400 2050 2050
U 4C609BEF
F0 "USB" 60
F1 "usb.sch" 60
F2 "nRST_RF" O R 4350 4700 60
F3 "SLP_TR" O R 4350 4850 60
F4 "IRQ_RF" I R 4350 4500 60
F5 "nSS" O R 4350 4300 60
F6 "SCLK" O R 4350 4150 60
F7 "MOSI" O R 4350 3850 60
F8 "MISO" I R 4350 4000 60
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup)
2011-01-28 08:42:35 +02:00
F9 "CLK" I R 4350 5050 60
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104
2011-01-04 06:19:54 +02:00
$EndSheet
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive
2010-08-12 19:09:36 +03:00
$Comp
L PWR_FLAG #FLG01
U 1 1 4C641B9C
Added default footprints to schematics. - atrf.sch: added footprint defaults, preferring 0402 - usb.sch: added footprint defaults, preferring 0603 - wpan-atrf.sch: added footprint defaults - usb.sch: tentatively set R1 to 100 Ohm
2010-08-12 21:35:32 +03:00
P 10000 6100
F 0 "#FLG01" H 10000 6370 30 0001 C CNN
F 1 "PWR_FLAG" H 10000 6330 30 0000 C CNN
1 10000 6100
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive
2010-08-12 19:09:36 +03:00
1 0 0 -1
$EndComp
$Comp
L GND #PWR02
U 1 1 4C641B91
Added default footprints to schematics. - atrf.sch: added footprint defaults, preferring 0402 - usb.sch: added footprint defaults, preferring 0603 - wpan-atrf.sch: added footprint defaults - usb.sch: tentatively set R1 to 100 Ohm
2010-08-12 21:35:32 +03:00
P 10000 6300
F 0 "#PWR02" H 10000 6300 30 0001 C CNN
F 1 "GND" H 10000 6230 30 0001 C CNN
1 10000 6300
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive
2010-08-12 19:09:36 +03:00
1 0 0 -1
$EndComp
Text Notes 900 1250 0 200 ~ 40
IEEE 802.15.4 USB TXRX
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm
2010-08-10 03:31:23 +03:00
$Sheet
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive
2010-08-12 19:09:36 +03:00
S 7350 3450 1800 1950
U 4C609C08
F0 "RF" 60
F1 "atrf.sch" 60
F2 "SLP_TR" I L 7350 4850 60
F3 "nRST_RF" I L 7350 4700 60
F4 "SCLK" I L 7350 4150 60
F5 "MISO" O L 7350 4000 60
F6 "MOSI" I L 7350 3850 60
F7 "nSS" I L 7350 4300 60
F8 "IRQ_RF" O L 7350 4500 60
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup)
2011-01-28 08:42:35 +02:00
F9 "CLK" O L 7350 5050 60
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm
2010-08-10 03:31:23 +03:00
$EndSheet
$EndSCHEMATC
Copy Permalink