ben-wpan/atusb/atusb.sch

EESchema Schematic File Version 2
LIBS:power
LIBS:r
LIBS:c
LIBS:at86rf231
LIBS:atmega8u2
LIBS:usb_a_plug
LIBS:xtal-4
LIBS:antenna
LIBS:balun-smt6
LIBS:testpoint
LIBS:atusb-cache
EELAYER 25 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 1 3
Title "IEEE 802.15.4 USB Transceiver (AT86RF231)"
Date "27 may 2011"
Rev "20110527"
Comp "Werner Almesberger"
Comment1 ""
Comment2 ""
Comment3 ""
Comment4 ""
$EndDescr
Wire Wire Line
	4350 5050 7350 5050
Wire Wire Line
	10000 6100 10000 6300
Wire Wire Line
	7350 4700 4350 4700
Wire Wire Line
	7350 4300 4350 4300
Wire Wire Line
	7350 4000 4350 4000
Wire Wire Line
	7350 3850 4350 3850
Wire Wire Line
	7350 4150 4350 4150
Wire Wire Line
	7350 4500 4350 4500
Wire Wire Line
	7350 4850 4350 4850
$Sheet
S 2300 3400 2050 2050
U 4C609BEF
F0 "USB" 60
F1 "usb.sch" 60
F2 "nRST_RF" O R 4350 4700 60 
F3 "SLP_TR" O R 4350 4850 60 
F4 "IRQ_RF" I R 4350 4500 60 
F5 "nSS" O R 4350 4300 60 
F6 "SCLK" O R 4350 4150 60 
F7 "MOSI" O R 4350 3850 60 
F8 "MISO" I R 4350 4000 60 
F9 "CLK" I R 4350 5050 60 
$EndSheet
$Comp
L PWR_FLAG #FLG01
U 1 1 4C641B9C
P 10000 6100
F 0 "#FLG01" H 10000 6370 30  0001 C CNN
F 1 "PWR_FLAG" H 10000 6330 30  0000 C CNN
F 2 "" H 10000 6100 60  0001 C CNN
F 3 "" H 10000 6100 60  0001 C CNN
	1    10000 6100
	1    0    0    -1  
$EndComp
$Comp
L GND #PWR02
U 1 1 4C641B91
P 10000 6300
F 0 "#PWR02" H 10000 6300 30  0001 C CNN
F 1 "GND" H 10000 6230 30  0001 C CNN
F 2 "" H 10000 6300 60  0001 C CNN
F 3 "" H 10000 6300 60  0001 C CNN
	1    10000 6300
	1    0    0    -1  
$EndComp
Text Notes 900  1250 0    200  ~ 40
IEEE 802.15.4 USB TXRX
$Sheet
S 7350 3450 1800 1950
U 4C609C08
F0 "RF" 60
F1 "atrf.sch" 60
F2 "SLP_TR" I L 7350 4850 60 
F3 "nRST_RF" I L 7350 4700 60 
F4 "SCLK" I L 7350 4150 60 
F5 "MISO" O L 7350 4000 60 
F6 "MOSI" I L 7350 3850 60 
F7 "nSS" I L 7350 4300 60 
F8 "IRQ_RF" O L 7350 4500 60 
F9 "CLK" O L 7350 5050 60 
$EndSheet
$EndSCHEMATC
atusb/: ATmega32U2 symbol was "lost"; update 2016-08-01 18:06:25 +03:00			`EESchema Schematic File Version 2`
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm 2010-08-10 03:31:23 +03:00			`LIBS:power`
atusb/: use "r" and "c" from kicad-libs, instead of KiCad "device" The latter even has incompatible changes. We really don't want that. 2016-08-01 18:10:15 +03:00			`LIBS:r`
			`LIBS:c`
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104 2011-01-04 06:19:54 +02:00			`LIBS:at86rf231`
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup) 2011-01-28 08:42:35 +02:00			`LIBS:atmega8u2`
atusb: remove two unnecessary test points - atrf.sch (P15): removed TST test point - usb.sch (P10): removed nSYSCLK test point - atusb.sch: commit noise 2010-12-01 18:28:05 +02:00			`LIBS:usb_a_plug`
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive 2010-08-12 19:09:36 +03:00			`LIBS:xtal-4`
			`LIBS:antenna`
atusb: remove two unnecessary test points - atrf.sch (P15): removed TST test point - usb.sch (P10): removed nSYSCLK test point - atusb.sch: commit noise 2010-12-01 18:28:05 +02:00			`LIBS:balun-smt6`
atusb/: new-style footprint table; use MEANDER-2450MHz-right-1.0mm-RELAXED 2016-09-01 08:05:45 +03:00			`LIBS:testpoint`
atusb: varistor Vdc was off by 100 mV; made it clearer that we use Vdc, not Vb - atusb/atusb.sch, atusb/usb.sch, atusb/atrf.sch: bumped schematics version to 20110519 - atusb/usb.sch (VR1, VR2, VR3): changed voltage from 5.6 V to 5.5 V - atusb/usb.sch (VR1, VR2, VR3): clarified that the voltage is Vdc, not Vb - bom/atrf.chr (AVR-M1005C080MTACB): Vdc is 5.5 V, not 5.6 V - bom/atrf.sub (VR[0-9]*): allow #.#Vdc as an alternative to #V# 2011-05-19 20:23:33 +03:00			`LIBS:atusb-cache`
atusb/: ATmega32U2 symbol was "lost"; update 2016-08-01 18:06:25 +03:00			`EELAYER 25 0`
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm 2010-08-10 03:31:23 +03:00			`EELAYER END`
atusb/: ATmega32U2 symbol was "lost"; update 2016-08-01 18:06:25 +03:00			`$Descr A4 11693 8268`
			`encoding utf-8`
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm 2010-08-10 03:31:23 +03:00			`Sheet 1 3`
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104 2011-01-04 06:19:54 +02:00			`Title "IEEE 802.15.4 USB Transceiver (AT86RF231)"`
atusb/: swapped C10 and C13 in schematics, to match layout - atrf.sch: C10 (EVDD bypass) and C13 (DEVDD bypass) had their roles swapped in the layout. Swapped them in the schematics to match the layout. - atusb.brd: updated the netlist - atusb.sch, usb.sch: commit noise 2011-05-27 10:29:01 +03:00			`Date "27 may 2011"`
			`Rev "20110527"`
Added title, author, and revision to all schematics and layouts. - atrf/wpan-atrf.sch, atrf/usb.sch, atrf/atrf.sch, atrf/wpan-atrf.brd: added title, author, and revision (100820) - cntr/cntr.sch, cntr/cntr.brd: added title, author, and revision (1) 2010-08-26 01:42:46 +03:00			`Comp "Werner Almesberger"`
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm 2010-08-10 03:31:23 +03:00			`Comment1 ""`
			`Comment2 ""`
			`Comment3 ""`
			`Comment4 ""`
			`$EndDescr`
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup) 2011-01-28 08:42:35 +02:00			`Wire Wire Line`
			`4350 5050 7350 5050`
			`Wire Wire Line`
			`10000 6100 10000 6300`
			`Wire Wire Line`
			`7350 4700 4350 4700`
			`Wire Wire Line`
			`7350 4300 4350 4300`
			`Wire Wire Line`
			`7350 4000 4350 4000`
			`Wire Wire Line`
			`7350 3850 4350 3850`
			`Wire Wire Line`
			`7350 4150 4350 4150`
			`Wire Wire Line`
			`7350 4500 4350 4500`
			`Wire Wire Line`
			`7350 4850 4350 4850`
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104 2011-01-04 06:19:54 +02:00			`$Sheet`
			`S 2300 3400 2050 2050`
			`U 4C609BEF`
			`F0 "USB" 60`
			`F1 "usb.sch" 60`
			`F2 "nRST_RF" O R 4350 4700 60`
			`F3 "SLP_TR" O R 4350 4850 60`
			`F4 "IRQ_RF" I R 4350 4500 60`
			`F5 "nSS" O R 4350 4300 60`
			`F6 "SCLK" O R 4350 4150 60`
			`F7 "MOSI" O R 4350 3850 60`
			`F8 "MISO" I R 4350 4000 60`
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup) 2011-01-28 08:42:35 +02:00			`F9 "CLK" I R 4350 5050 60`
atusb: switched from the AT86RF230 to the AT86RF231, added missing RF ground - atrf.sch: replaced the AT86RF230 with the AT86RF231 - atusb.sch, usb.sch, atrf.sch: removed TST signal - atrf.sch: grounded former TST pin - atusb.brd: updated for TST removal - atusb.brd: increased space between SLP_TR and nRST_RF vias - atusb.brd: connect U2 pin 6 to ground pad - atusb.sch, usb.sch, atrf.sch, atusb.brd: changed version to 20110104 2011-01-04 06:19:54 +02:00			`$EndSheet`
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive 2010-08-12 19:09:36 +03:00			`$Comp`
			`L PWR_FLAG #FLG01`
			`U 1 1 4C641B9C`
Added default footprints to schematics. - atrf.sch: added footprint defaults, preferring 0402 - usb.sch: added footprint defaults, preferring 0603 - wpan-atrf.sch: added footprint defaults - usb.sch: tentatively set R1 to 100 Ohm 2010-08-12 21:35:32 +03:00			`P 10000 6100`
			`F 0 "#FLG01" H 10000 6370 30 0001 C CNN`
			`F 1 "PWR_FLAG" H 10000 6330 30 0000 C CNN`
atusb/: ATmega32U2 symbol was "lost"; update 2016-08-01 18:06:25 +03:00			`F 2 "" H 10000 6100 60 0001 C CNN`
			`F 3 "" H 10000 6100 60 0001 C CNN`
Added default footprints to schematics. - atrf.sch: added footprint defaults, preferring 0402 - usb.sch: added footprint defaults, preferring 0603 - wpan-atrf.sch: added footprint defaults - usb.sch: tentatively set R1 to 100 Ohm 2010-08-12 21:35:32 +03:00			`1 10000 6100`
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive 2010-08-12 19:09:36 +03:00			`1 0 0 -1`
			`$EndComp`
			`$Comp`
			`L GND #PWR02`
			`U 1 1 4C641B91`
Added default footprints to schematics. - atrf.sch: added footprint defaults, preferring 0402 - usb.sch: added footprint defaults, preferring 0603 - wpan-atrf.sch: added footprint defaults - usb.sch: tentatively set R1 to 100 Ohm 2010-08-12 21:35:32 +03:00			`P 10000 6300`
			`F 0 "#PWR02" H 10000 6300 30 0001 C CNN`
			`F 1 "GND" H 10000 6230 30 0001 C CNN`
atusb/: ATmega32U2 symbol was "lost"; update 2016-08-01 18:06:25 +03:00			`F 2 "" H 10000 6300 60 0001 C CNN`
			`F 3 "" H 10000 6300 60 0001 C CNN`
Added default footprints to schematics. - atrf.sch: added footprint defaults, preferring 0402 - usb.sch: added footprint defaults, preferring 0603 - wpan-atrf.sch: added footprint defaults - usb.sch: tentatively set R1 to 100 Ohm 2010-08-12 21:35:32 +03:00			`1 10000 6300`
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive 2010-08-12 19:09:36 +03:00			`1 0 0 -1`
			`$EndComp`
			`Text Notes 900 1250 0 200 ~ 40`
			`IEEE 802.15.4 USB TXRX`
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm 2010-08-10 03:31:23 +03:00			`$Sheet`
Made first draft of schematics. - usb.sch: largely based on reference design, with fewer caps - atrf.sch: reference design plus LC-balun from AVR2004 - wpan-atrf.sch: tie it all together - components/at86rf230.lib, components/at86rf230.dcm: changed bidirectional power pins to passive 2010-08-12 19:09:36 +03:00			`S 7350 3450 1800 1950`
			`U 4C609C08`
			`F0 "RF" 60`
			`F1 "atrf.sch" 60`
			`F2 "SLP_TR" I L 7350 4850 60`
			`F3 "nRST_RF" I L 7350 4700 60`
			`F4 "SCLK" I L 7350 4150 60`
			`F5 "MISO" O L 7350 4000 60`
			`F6 "MOSI" I L 7350 3850 60`
			`F7 "nSS" I L 7350 4300 60`
			`F8 "IRQ_RF" O L 7350 4500 60`
atusb: replaced the C8051F326 with an ATmega32U2 (still needs cleanup) - atusb.pro (LibName5): changed from c8051f326 to atmega8u2 - atrf.sch: export CLKM and added filter for 8 MHz clock - atusb.sch: connect CLK between RF and USB side - usb.sch: changed design frim C8051F326 to ATmega32U2 (needs cleanup) 2011-01-28 08:42:35 +02:00			`F9 "CLK" O L 7350 5050 60`
Added AT86RF230 schematics symbol and some misc. stuff. - Makefile: "make sch", "make brd", plus a few placeholders - wpan-atrf.sch, usb.sch, atrf.sch: schematics sheets (with little on) - components/INFO, components/at86rf230.lib, components/at86rf230.dcm 2010-08-10 03:31:23 +03:00			`$EndSheet`
			`$EndSCHEMATC`