ben-wpan/atusb/fw/common/io.h

/*
 * common/io.h - I/O pin assignment
 *
 * Written 2010 by Werner Almesberger
 * Copyright 2010 Werner Almesberger
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */


#ifndef IO_H
#define IO_H

/* Diagnostic LED */

#define	LED	P0_1

/* SPI */

#define	MOSI	P2_2
#define	MISO	P2_5
#define	SCLK	P2_4
#define	nSS	P2_3

/* Miscellaneous RF signals */

#define	nRST_RF	P2_0
#define	IRQ_RF	P0_0
#define	SLP_TR	P2_1
#define	TST	P0_7

#endif /* !IO_H */
fw/atspi/: added application with basic EP0 protocol 2010-08-19 15:04:51 +03:00			`/*`
Turn the LED on while in the boot loader. - fw/common/config.h: added platform defines to enable the LED while in the boot loader - fw/common/io.h: updated path in title 2010-08-20 05:14:55 +03:00			`* common/io.h - I/O pin assignment`
fw/atspi/: added application with basic EP0 protocol 2010-08-19 15:04:51 +03:00			`*`
			`* Written 2010 by Werner Almesberger`
			`* Copyright 2010 Werner Almesberger`
			`*`
			`* This program is free software; you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation; either version 2 of the License, or`
			`* (at your option) any later version.`
			`*/`


			`#ifndef IO_H`
			`#define IO_H`

			`/* Diagnostic LED */`

			`#define LED P0_1`

			`/* SPI */`

			`#define MOSI P2_2`
			`#define MISO P2_5`
			`#define SCLK P2_4`
			`#define nSS P2_3`

			`/* Miscellaneous RF signals */`

			`#define nRST_RF P2_0`
Update IRQ_RF after reworking both boards. IRQ_RF was erroneously connected to P0_2 but it should go to P0_0. - atrf/fw/common/io.h: IRQ_RF is now at P0_0 - atrf/fw/atspi/atspi.c: updated and simplified P0 initialization 2010-08-24 05:02:43 +03:00			`#define IRQ_RF P0_0`
fw/atspi/: added application with basic EP0 protocol 2010-08-19 15:04:51 +03:00			`#define SLP_TR P2_1`
atusd firmware now supports setting the TST pin. - common/io.h: TST is connected to P0_7 - include/at86rf230.h: added test mode registers REG_CONT_TX_0 (0x36) and REG_CONT_TX_1 (0x3d), with their values - atspi/atspi.c (set_test_mode): set or reset TST and the LED - atspi/atspi.c (reset_rf): leave test mode - atspi/atspi.c (test_mode): enter test mode - atspi/atspi.c (main): flash the LED when in test mode - include/atspi/ep0.h (enum atspi_requests), atspi/ep0.c (my_setup): new command ATSPI_TEST to enter test mode - include/atspi/ep0.h (EP0ATSPI_MINOR): bumped protocol to version 0.1 - include/at86rf230.h: corrected comment before TRX_CMD field to indicate that the register is called TRX_STATE 2010-11-11 07:25:54 +02:00			`#define TST P0_7`
fw/atspi/: added application with basic EP0 protocol 2010-08-19 15:04:51 +03:00
			`#endif /* !IO_H */`