ben-wpan/atusb/fw/common/Makefile.common

#
# common/Makefile.common - Makefile settings shared within project
#
# Written 2010 by Werner Almesberger
# Copyright 2010 Werner Almesberger
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#

#BOARD=BOARD_100813
BOARD=BOARD_101216
atusb: firmware update for the 2010-12-16 board series - fw/Makefile: replaced "make" with $(MAKE) (just for style) - common/Makefile.common: Makefile settings shared within project. For now, this contains only the board version, which defaults to 2010-12-16. - fw/common/Makefile, fw/boot/Makefile, fw/atusb/Makefile: include common/Makefile.common - fw/common/Makefile, fw/boot/Makefile, fw/atusb/Makefile: pass board version to cpp and gcc - fw/atusb/atusb.c (init_io): individually set IRQ_RF to one, LED and TST to zero - fw/atusb/atusb.c (init_io): added macros to set all unused pins to zero in a way that doesn't need updating if a signal moves from one pin to another - include/atusb/ep0.h: added hardware type 1 (2010-12-16 design) - common/config.h: set hardware type depending on board version - common/io.h: assign pins depending on board version 2010-12-18 04:01:31 +02:00			`#`
			`# common/Makefile.common - Makefile settings shared within project`
			`#`
			`# Written 2010 by Werner Almesberger`
			`# Copyright 2010 Werner Almesberger`
			`#`
			`# This program is free software; you can redistribute it and/or modify`
			`# it under the terms of the GNU General Public License as published by`
			`# the Free Software Foundation; either version 2 of the License, or`
			`# (at your option) any later version.`
			`#`

			`#BOARD=BOARD_100813`
			`BOARD=BOARD_101216`