qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-18 01:49:41 +02:00
Code
f7a8bbdd7a
ben-wpan/atusb/atusb.cmp

214 lines
3.2 KiB
Plaintext
Raw Normal View History

atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
Cmp-Mod V01 Created by CvPCB (2010-08-11 BZR 2448)-unstable date = Wed Dec 1 00:35:18 2010
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
BeginCmp
TimeStamp = /4C609C08/4C63FE17;
Reference = ANT1;
ValeurCmp = 50R;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
IdModule = MEANDER-110;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
BeginCmp
TimeStamp = /4C609C08/4CF4B034;
Reference = B1;
ValeurCmp = 2450FB15L0001;
IdModule = 0805-6;
EndCmp
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
BeginCmp
TimeStamp = /4C609BEF/4C6401AA;
Reference = C1;
ValeurCmp = 1uF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6401B3;
Reference = C2;
ValeurCmp = 100nF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641710;
Reference = C3;
ValeurCmp = 22pF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641506;
Reference = C8;
ValeurCmp = 22pF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641509;
Reference = C9;
ValeurCmp = 22pF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A76;
Reference = C10;
ValeurCmp = 1uF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C641004;
Reference = C11;
ValeurCmp = 1uF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A84;
Reference = C12;
ValeurCmp = 1uF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A7E;
Reference = C13;
ValeurCmp = 1uF;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A73;
Reference = C14;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = 12pF;
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A7B;
Reference = C15;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = 12pF;
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
TimeStamp = /4C609BEF/4CF4AD1B;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
Reference = CON1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = USB_A_PLUG_;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
IdModule = USB-A-PLUG-SMT;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6402EE;
Reference = D1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = LTST-C190KTKR;
IdModule = 0603-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6409BB;
Reference = P10;
ValeurCmp = TST;
IdModule = PAD_60x60;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6401FE;
Reference = P11;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640200;
Reference = P12;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640202;
Reference = P13;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640203;
Reference = P14;
ValeurCmp = CONN_1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = PAD_60x60;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640A8D;
Reference = P15;
ValeurCmp = TST;
IdModule = PAD_60x60;
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C640CD5;
Reference = P16;
ValeurCmp = TST;
IdModule = PAD_60x60;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6402F2;
Reference = R1;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
ValeurCmp = 68;
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
TimeStamp = /4C609C08/4CF4B07E;
Reference = R3;
ValeurCmp = 0R;
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C609C36;
Reference = U1;
ValeurCmp = C8051F326;
IdModule = QFN28;
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C609C4B;
Reference = U2;
ValeurCmp = AT86RF230;
IdModule = QFN32;
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C6402FB;
Reference = VR1;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
ValeurCmp = 5V6;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C640343;
Reference = VR2;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
ValeurCmp = 5V6;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609BEF/4C64034D;
Reference = VR3;
atusb: updated footprint assignment - atusb/atusb.pro: instead of modules/meander, use experimental ants/meander - atusb/atusb.pro: typo - it's modules/usb_a_plug_smt, not modules/usb_a_plug - atusb/atusb.cmp (ANT1): change antenna from "meander" to "MEANDER-110" (10% enlarged) - atusb/atusb.cmp (CON1): change from "miniUSB_B" USB receptacle to "USB-A-PLUG-SMT" plug - atusb/atusb.cmp (VR1, VR2, VR3): update value from schematics
2010-12-01 16:01:49 +02:00
ValeurCmp = 5V6;
atusb: use 0402 as the preferred component size and replace bad TVS We know from CNTR that the capacitance of the 0603 TVS (EPCOS CT0603M4G, 200 pF) is too large and can disturb the USB signal. The 0402 TVS (Panasonic EZJ-P0V080GA, 100 pF) works much better. Since we have lots of 0402 components already, just change the remaining 0603 to 0402, too. - usb.sch (VR1, VR2, VR3): change from 0603 to 0402 and from 5V5 to 5V6 - usb.sch (C1, C2, R1): change from 0603 to 0402 - atrf.sch (R3): set footprint to 0402 - atusb.pro: replaced modules/mini-usb with modules/usb_a_plug - atusb.pro: removed extension from components/balun-smt6.lib - atusb.cmp: update footprints for above changes - atusb.cmp: change 0402 to 0402-M and 0603 to 0603-M, for easier soldering
2010-11-30 11:39:48 +02:00
IdModule = 0402-M;
First layout draft. (No GND areas, not quite following design rules.) - wpan-atrf.brd: first attempt at a layout for the USB prototype - wpan-atrf.cmp: (redundant) component list, to keep pcbnew from complaining - atrf.sch: added labels to previously anonymous nets - wpan-atrf.pro: added libraries (and noise from cvpcb and pcbnew)
2010-08-13 04:35:54 +03:00
EndCmp
BeginCmp
TimeStamp = /4C609C08/4C63FA9F;
Reference = X1;
ValeurCmp = 16MHz;
IdModule = xtal4-3.2mmx2.5mm;
EndCmp
EndListe
Copy Permalink