qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-22 01:23:08 +02:00
Code

README: replace obsolete hardware description with the hardware history

Browse Source
This commit is contained in:
Werner Almesberger 2013-02-04 19:33:17 -03:00
parent ee870b57d0
commit 1d069a1019
1 changed files with 27 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
README
View File

@ -12,17 +12,35 @@ and to examine possible integration into future devices.
This work is licensed under the terms detailed in the file COPYING.
Hardware architecture
---------------------
Hardware history
----------------
IEEE 802.15.4 transceiver chips are available from several manufacturers,
including Atmel, Freescale, and Texas Instruments. These chips are similar
in size, functionality, and cost. The first prototype is based on the
Atmel AT86RF230.
in size, functionality, and cost. The first prototype of this project was
based on the Atmel AT86RF230.
The RF module will be physically placed on the left side of the LCD
module, replacing part of the display's PCB.
The initial plan was to place the RF module on the left side of the LCD
module of the Ben NanoNote, replacing part of the display's PCB. When
installed in the Ben, the transceiver would connect directly via SPI to
the Jz4720. For development, a SiLabs C8051F326 microcontroller
implemented a USB to SPI conversion.
When installed in the Ben, the transceiver will connect directly via SPI
to the Jz4720. For development, a SiLabs C8051F326 microcontroller
implements a USB to SPI conversion.
Then Rikard Lindstrom came up with the idea of using the Ben's 8:10 card
slot as a general expansion interface, which led to the idea of making
a WPAN card in that form factor, with the benefit of being readily usable
with any Ben already in existence.
Thus the project was split in two parts: the atben card that had only the
transceiver chip and would be used with the Ben, and the atusb card that
would be similar to the original design but abandoned its clear physical
separation of USB and RF.
Meanwhile, an improved version of the AT86RF230, the AT86RF231, became
available and the designs were updated for it. It also turned out that
the clock from the Ben was too noisy to be used as a clock source for
the transceiver. Therefore, a crystal was added to the atben design.
Finally, the SiLabs C8051F326 was replaced by an ATmega32U2, mainly
because the latter has a larger Flash memory and greater community
acceptance.