mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-11-26 05:17:19 +02:00
Implemented AT86RF230 reset and access modes. (Completely untested.)
- fw/atspi/at86rf230.h: AT86RF230 SPI protocol commands and buffer sizes
- fw/atspi/atspi.c (init_io): set all IOs to their initial state
- fw/include/atspi/ep0.h, fw/atspi/ep0.c (my_setup): command ATSPI_RF_RESET
to reset the AT86RF230
- fw/include/atspi/ep0.h, fw/atspi/ep0.c (my_setup): commands
ATSPI_{REG,BUF,SRAM}_{READ,WRITE} for the six SPI access modes
This commit is contained in:
Werner Almesberger
parent
3c87d9f8c7
commit
5447951c6e
29
fw/atspi/at86rf230.h
Normal file
29
fw/atspi/at86rf230.h
Normal file
@ -0,0 +1,29 @@
|
||||
/*
|
||||
* atspi/at86rf230.h - AT86RF230 protocol and register definitions
|
||||
*
|
||||
* Written 2008-2010 by Werner Almesberger
|
||||
* Copyright 2008-2010 Werner Almesberger
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef AT86RF230_H
|
||||
#define AT86RF230_H
|
||||
|
||||
enum at86rf230_spi_cmd {
|
||||
AT86RF230_REG_WRITE = 0xc0, /* 11... */
|
||||
AT86RF230_REG_READ = 0x80, /* 10... */
|
||||
AT86RF230_BUF_WRITE = 0x60, /* 011... */
|
||||
AT86RF230_BUF_READ = 0x20, /* 001... */
|
||||
AT86RF230_SRAM_WRITE = 0x40, /* 010... */
|
||||
AT86RF230_SRAM_READ = 0x00 /* 000... */
|
||||
};
|
||||
|
||||
#define MAX_PSDU 127 /* octets, see AT86RF230 manual section 8.1 */
|
||||
#define SRAM_SIZE 128
|
||||
|
||||
#endif /* !AT86RF230_H */
|
||||
@ -18,8 +18,48 @@
|
||||
#include "version.h"
|
||||
|
||||
|
||||
static void init_io(void)
|
||||
{
|
||||
/*
|
||||
* Signal Mode Value
|
||||
*
|
||||
* MOSI push-pull 0
|
||||
* MISO open drain 1 (input)
|
||||
* SCLK push-pull 1
|
||||
* nSS push-pull 1
|
||||
* nRST_RF push-pull 1
|
||||
* IRQ_RF open drain 1 (input)
|
||||
* SLP_TR push-pull 0
|
||||
*
|
||||
* LED push-pull 0 (set up by boot loader)
|
||||
*
|
||||
* all unused open drain 0
|
||||
*/
|
||||
|
||||
MOSI = 0;
|
||||
MOSI_MODE = 1;
|
||||
|
||||
SCLK = 0;
|
||||
SCLK_MODE = 1;
|
||||
|
||||
nSS_MODE = 1;
|
||||
|
||||
nRST_RF_MODE = 1;
|
||||
|
||||
SLP_TR = 0;
|
||||
SLP_TR_MODE = 1;
|
||||
|
||||
P0 &=
|
||||
~((1 << 0) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7));
|
||||
P3 = 0;
|
||||
|
||||
}
|
||||
|
||||
|
||||
void main(void)
|
||||
{
|
||||
init_io();
|
||||
|
||||
usb_init();
|
||||
ep0_init();
|
||||
|
||||
|
||||
120
fw/atspi/ep0.c
120
fw/atspi/ep0.c
@ -21,6 +21,7 @@
|
||||
//#include "uart.h"
|
||||
#include "usb.h"
|
||||
#include "atspi/ep0.h"
|
||||
#include "at86rf230.h"
|
||||
#include "version.h"
|
||||
|
||||
|
||||
@ -29,11 +30,52 @@
|
||||
|
||||
|
||||
static const uint8_t id[] = { EP0ATSPI_MAJOR, EP0ATSPI_MINOR, HW_TYPE };
|
||||
static __xdata uint8_t buf[MAX_PSDU+3]; /* command, PHDR, and LQ */
|
||||
static uint8_t size;
|
||||
|
||||
|
||||
static void spi_send(uint8_t v)
|
||||
{
|
||||
uint8_t mask;
|
||||
|
||||
for (mask = 0x80; mask; mask >>= 1) {
|
||||
MOSI = !!(v & mask);
|
||||
SCLK = 1;
|
||||
SCLK = 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static uint8_t spi_recv(void)
|
||||
{
|
||||
uint8_t res = 0;
|
||||
uint8_t i;
|
||||
|
||||
for (i = 0; i != 8; i++) {
|
||||
res = (res << 1) | MISO;
|
||||
SCLK = 1;
|
||||
SCLK = 0;
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
|
||||
static void do_buf_write(void *user)
|
||||
{
|
||||
uint8_t i;
|
||||
|
||||
user; /* suppress warning */
|
||||
nSS = 0;
|
||||
spi_send(AT86RF230_BUF_WRITE);
|
||||
for (i = 0; i != size; i++)
|
||||
spi_send(buf[i]);
|
||||
nSS = 1;
|
||||
}
|
||||
|
||||
|
||||
static __bit my_setup(struct setup_request *setup) __reentrant
|
||||
{
|
||||
uint8_t size;
|
||||
uint8_t i;
|
||||
|
||||
switch (setup->bmRequestType | setup->bRequest << 8) {
|
||||
case ATSPI_FROM_DEV(ATSPI_ID):
|
||||
@ -63,6 +105,82 @@ static __bit my_setup(struct setup_request *setup) __reentrant
|
||||
RSTSRC = SWRSF;
|
||||
while (1);
|
||||
|
||||
case ATSPI_TO_DEV(ATSPI_RF_RESET):
|
||||
debug("ATSPI_RF_RESET\n");
|
||||
nRST_RF = 0;
|
||||
/* 11.4.12 min 625 ns */
|
||||
nRST_RF = 1;
|
||||
return 1;
|
||||
|
||||
case ATSPI_TO_DEV(ATSPI_REG_WRITE):
|
||||
debug("ATSPI_REG_WRITE\n");
|
||||
nSS = 0;
|
||||
spi_send(AT86RF230_REG_WRITE | setup->wIndex);
|
||||
spi_send(setup->wValue);
|
||||
nSS = 1;
|
||||
return 1;
|
||||
case ATSPI_FROM_DEV(ATSPI_REG_READ):
|
||||
debug("ATSPI_REG_READ\n");
|
||||
nSS = 0;
|
||||
spi_send(AT86RF230_REG_READ | setup->wIndex);
|
||||
*buf = spi_recv();
|
||||
nSS = 1;
|
||||
usb_send(&ep0, buf, 1, NULL, NULL);
|
||||
return 1;
|
||||
|
||||
case ATSPI_TO_DEV(ATSPI_BUF_WRITE):
|
||||
debug("ATSPI_BUF_WRITE\n");
|
||||
if (setup->wLength < 1)
|
||||
return 0;
|
||||
if (setup->wLength > MAX_PSDU+1) /* PHR+PSDU */
|
||||
return 0;
|
||||
buf[0] = AT86RF230_BUF_WRITE;
|
||||
size = setup->wLength+1;
|
||||
usb_recv(&ep0, buf+1, setup->wLength, do_buf_write, NULL);
|
||||
return 1;
|
||||
case ATSPI_TO_DEV(ATSPI_BUF_READ):
|
||||
debug("ATSPI_BUF_READ\n");
|
||||
if (setup->wLength < 2) /* PHR+LQ */
|
||||
return 0;
|
||||
if (setup->wLength > MAX_PSDU+2) /* PHR+PSDU+LQ */
|
||||
return 0;
|
||||
nSS = 0;
|
||||
spi_send(AT86RF230_BUF_READ);
|
||||
size = *buf = spi_recv();
|
||||
if (size+2 > setup->wLength)
|
||||
size = setup->wLength-2;
|
||||
for (i = 0; i != size+1; i++)
|
||||
buf[i+1] = spi_recv();
|
||||
nSS = 1;
|
||||
usb_send(&ep0, buf, size+1, NULL, NULL);
|
||||
return 1;
|
||||
|
||||
case ATSPI_TO_DEV(ATSPI_SRAM_WRITE):
|
||||
debug("ATSPI_SRAM_WRITE\n");
|
||||
if (setup->wIndex > SRAM_SIZE)
|
||||
return 0;
|
||||
if (setup->wIndex+setup->wLength > SRAM_SIZE)
|
||||
return 0;
|
||||
buf[0] = AT86RF230_SRAM_WRITE;
|
||||
buf[1] = setup->wIndex;
|
||||
size = setup->wLength+2;
|
||||
usb_recv(&ep0, buf+2, setup->wLength, do_buf_write, NULL);
|
||||
return 1;
|
||||
case ATSPI_TO_DEV(ATSPI_SRAM_READ):
|
||||
debug("ATSPI_SRAM_READ\n");
|
||||
if (setup->wIndex > SRAM_SIZE)
|
||||
return 0;
|
||||
if (setup->wIndex+setup->wLength > SRAM_SIZE)
|
||||
return 0;
|
||||
nSS = 0;
|
||||
spi_send(AT86RF230_SRAM_READ);
|
||||
spi_send(setup->wIndex);
|
||||
for (i = 0; i != size; i++)
|
||||
buf[i] = spi_recv();
|
||||
nSS = 1;
|
||||
usb_send(&ep0, buf, size, NULL, NULL);
|
||||
return 1;
|
||||
|
||||
default:
|
||||
error("Unrecognized SETUP: 0x%02x 0x%02x ...\n",
|
||||
setup->bmRequestType, setup->bRequest);
|
||||
|
||||
@ -17,10 +17,19 @@
|
||||
/*
|
||||
* Direction bRequest wValue wIndex wLength
|
||||
*
|
||||
* ->host ATSPI_ID 0 0 3
|
||||
* host-> ATSPI_RESET 0 0 0
|
||||
* ->host ATSPI_ID - - 3
|
||||
* host-> ATSPI_RESET - - 0
|
||||
* ->host ATSPI_BUILD_NUMBER - - 2
|
||||
* ->host ATSPI_BUILD_DATE - - #bytes
|
||||
*
|
||||
* host-> ATSPI_RF_RESET - -
|
||||
*
|
||||
* host-> ATSPI_REG_WRITE value addr 0
|
||||
* ->host ATSPI_REG_READ - addr 1
|
||||
* host-> ATSPI_BUF_WRITE - - #bytes
|
||||
* ->host ATSPI_BUF_READ - - #bytes
|
||||
* host-> ATSPI_SRAM_WRITE - addr #bytes
|
||||
* ->host ATSPI_SRAM_READ - addr #bytes
|
||||
*/
|
||||
|
||||
/*
|
||||
@ -55,6 +64,13 @@ enum atspi_requests {
|
||||
ATSPI_RESET,
|
||||
ATSPI_BUILD_NUMBER,
|
||||
ATSPI_BUILD_DATE,
|
||||
ATSPI_RF_RESET = 0x10,
|
||||
ATSPI_REG_WRITE = 0x20,
|
||||
ATSPI_REG_READ,
|
||||
ATSPI_BUF_WRITE,
|
||||
ATSPI_BUF_READ,
|
||||
ATSPI_SRAM_WRITE,
|
||||
ATSPI_SRAM_READ,
|
||||
};
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user