diff --git a/atben/README-PCB b/atben/README-PCB
index 362cb71..9876d3c 100644
--- a/atben/README-PCB
+++ b/atben/README-PCB
@@ -4,8 +4,8 @@ Board characteristics:
 - board material: FR4, thickness 0.8 mm (1/32"), 1 oz copper
 - surface finish: ENIG recommended
 - via holes: diameter is nominally 10 mil, but any size <= 15 mil can be used
-- ground via of the antenna: diameter is nominally 8 mil, but any size <= 15
-  mil can be used
+- ground via of the antenna: hole diameter is nominally 8 mil, but any size
+  <= 15 mil can be used
 - mechanical tolerances: <= +/- 0.1 mm on all sides
 
 
@@ -20,7 +20,7 @@ atben-Mask_Back.gbs	Back solder mask
 
 Other design files:
 
-atben-front.png		Illustration of the PCB's front side (without holes)
+atben-front.png		Illustration of the PCB's front side
 atben-back.png		idem, for the back side
 atben-PCB_Edges.gbr	Board edges, for routing (Gerber)
 atben.dxf		idem (AutoCAD DXF)
diff --git a/atusb/README-PCB b/atusb/README-PCB
index 61df411..e7b91e5 100644
--- a/atusb/README-PCB
+++ b/atusb/README-PCB
@@ -4,8 +4,8 @@ Board characteristics:
 - board material: FR4, thickness 0.8 mm (1/32"), 1 oz copper
 - surface finish: TBD, ENIG is preferred
 - via holes: diameter is nominally 10 mil, but any size <= 15 mil can be used
-- ground via of the antenna: diameter is nominally 8 mil, but any size <= 15 
-  mil can be used
+- ground via of the antenna: hole diameter is nominally 8 mil, but any size
+  <= 15 mil can be used
 - mechanical tolerances: <= +/- 0.1 mm on all sides
 
 
@@ -20,7 +20,7 @@ atusb-Mask_Back.gbs	Back solder mask
 
 Other design files:
 
-atusb-front.png		Illustration of the PCB's front side (without holes)
+atusb-front.png		Illustration of the PCB's front side
 atusb-back.png		idem, for the back side
 atusb-PCB_Edges.gbr	Board edges, for routing (Gerber)
 atusb.dxf		idem (AutoCAD DXF)