qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-11-22 20:03:09 +02:00
Code

prod/doc/setup.html: added reference clock count; fixed garbled sentence

Browse Source
This commit is contained in:
Werner Almesberger 2011-05-19 16:17:34 -03:00
parent e0ac5c9fb0
commit 68e56afd3d
1 changed files with 30 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
prod/doc/setup.html
View File

@ -120,7 +120,7 @@ atrf-proxy -b
<H3>Password-less remote access</H3>
To enable password-less remote access from the PC, setup to betwork
To enable password-less remote access from the PC, set up network
access to the Ben and run the following command:
<PRE>
ssh ben 'cat >>/etc/dropbear/authorized_keys' <~/.ssh/id_rsa.pub
@ -132,6 +132,35 @@ ssh ben 'cat >>/etc/dropbear/authorized_keys' <~/.ssh/id_rsa.pub
<H2>Test profiles</H2>
Some of the functional tests measure characteristics that are strongly
influenced by the test setup. It is therefore not possible to provide
universally applicable reference values, but they have to be measured
in the actual test environment.
<!-- ---------------------------------------------------------------------- -->
<H3>Clock count (atben only)</H3>
Insert a known to be good <B>atben</B> board and run the following
command directly on the Ben to record the reference value for the
clock count with an accuracy of about +/&minus;20 ppm:
<PRE>
atrf-xtal 1000 >ben.xtal
</PRE>
<P>
Note that this value depends on the tolerance of the crystal in the Ben
and is also affected by temperature. The above accuracy can therefore
only be obtained if this measurement is performed individually on each
Ben, and if a stable temperature is maintained.
<!-- ---------------------------------------------------------------------- -->
<H3>Signal strength</H3>
<P>
<HR>