qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-12-23 14:18:58 +02:00
Code

prod/doc/flash.html: described the flashing process

Browse Source
This commit is contained in:
Werner Almesberger 2011-05-21 12:11:15 -03:00
parent e9d65fbfd3
commit 6adfd4b1fd
1 changed files with 35 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
prod/doc/flash.html
View File

@ -11,7 +11,7 @@ of the following two parts:
<LI>The application (via DFU, using <B>dfu-util</B>) <LI>The application (via DFU, using <B>dfu-util</B>)
</OL> </OL>
<P> <P>
Note that <B>atben</B> has no microcontroller and there does not need Note that <B>atben</B> has no microcontroller and therefore does not need
any flashing. any flashing.
@ -21,9 +21,33 @@ any flashing.
<H2>Flashing the boot loader</H2> <H2>Flashing the boot loader</H2>
The following image shows the setup for flashing the boot loader:
<P> <P>
<IMG src="setup-C.png"> <IMG src="setup-C.png">
<P> <P>
To flash the boot loader,
<UL>
<LI>insert the <B>atusb-pgm</B> board into the Ben
<LI>place the <B>atusb</B> board (DUT) on the table near the Ben,
without connecting it to USB
<LI>place <B>atusb-pgm</B> onto <B>atusb</B> as shown in the image below
and gently push it on the contacts
<P>
<A href="http://downloads.qi-hardware.com/people/werner/wpan/tmp/atusb-programming.jpg"><IMG
src="http://downloads.qi-hardware.com/people/werner/wpan/tmp/atusb-programming.jpg"
width="250"></A>
<P>
<LI>finally, run
<PRE>
make flash
</PRE>
</UL>
<P>
The flashing takes about 20-30 seconds. If it should fail, make sure you
properly placed <B>atusb-pgm</B> and try again. If it keeps on failing,
remove <B>atusb-pgm</B> from the Ben and insert it again.
If flashing fails despite numerous attempts, proceed to the
<A href="analysis.html">fault analysis</A>.
<!-- ====================================================================== --> <!-- ====================================================================== -->
@ -31,9 +55,19 @@ any flashing.
<H2>Flashing the application</H2> <H2>Flashing the application</H2>
The flashing script proceeds automatically to the flashing of the
application. All you need to do is insert the <B>atusb</B> board
into the PC:
<P> <P>
<IMG src="setup-D.png"> <IMG src="setup-D.png">
<P> <P>
The flashing script will wait up to 30 seconds for enumeration.
Once the <B>atusb</B> board has been detected, the script transfers
the application with DFU. After this, you can proceed with the
<A href="test.html">functional test</A>.
<P>
If the board fails to enumerate, proceed with the
<A href="analysis.html">fault analysis</A>.
<P> <P>
<HR> <HR>