atusb: fw: re-factor SPI, USB and board_app code for board specifics

Move board specific code form spi, usb and board_app into the new board specific
files to avoid to many ifdefs.

atusb/fw/board_app.c

@@ -171,21 +171,3 @@ ISR(TIMER1_CAPT_vect)
 		usb_send(&eps[1], &irq_serial, 1, done, NULL);
 	}
 }
-
-#ifdef ATUSB
-void board_app_init(void)
-{
-	/* enable INT0, trigger on rising edge */
-	EICRA = 1 << ISC01 | 1 << ISC00;
-	EIMSK = 1 << 0;
-}
-#endif
-#ifdef RZUSB
-void board_app_init(void)
-{
-	/* enable timer input capture 1, trigger on rising edge */
-	TCCR1B = (1 << ICES1);
-	TIFR1 = (1 << ICF1);
-	TIMSK1 = (1 << ICIE1);
-}
-#endif

atusb/fw/board_atusb.c

@@ -25,6 +25,9 @@
 #include "at86rf230.h"
 #include "board.h"
 #include "spi.h"
+#include "usb/usb.h"
+
+static bool spi_initialized = 0;
 
 void set_clkm(void)
 {
@@ -58,3 +61,62 @@ void board_init(void)
 
 	get_sernum();
 }
+
+void spi_begin(void)
+{
+	if (!spi_initialized)
+		spi_init();
+	CLR(nSS);
+}
+
+void spi_off(void)
+{
+	spi_initialized = 0;
+	UCSR1B = 0;
+}
+
+void spi_init(void)
+{
+	SET(nSS);
+	OUT(SCLK);
+	OUT(MOSI);
+	OUT(nSS);
+	IN(MISO);
+
+	UBRR1 = 0;	/* set bit rate to zero to begin */
+	UCSR1C = 1 << UMSEL11 | 1 << UMSEL10;
+			/* set MSPI, MSB first, SPI data mode 0 */
+	UCSR1B = 1 << RXEN1 | 1 << TXEN1;
+			/* enable receiver and transmitter */
+	UBRR1 = 0;	/* reconfirm the bit rate */
+
+	spi_initialized = 1;
+}
+
+void usb_init(void)
+{
+	USBCON |= 1 << FRZCLK;		/* freeze the clock */
+
+	/* enable the PLL and wait for it to lock */
+	PLLCSR &= ~(1 << PLLP2 | 1 << PLLP1 | 1 << PLLP0);
+	PLLCSR |= 1 << PLLE;
+	while (!(PLLCSR & (1 << PLOCK)));
+
+	USBCON &= ~(1 << USBE);		/* reset the controller */
+	USBCON |= 1 << USBE;
+
+	USBCON &= ~(1 << FRZCLK);	/* thaw the clock */
+
+	UDCON &= ~(1 << DETACH);	/* attach the pull-up */
+	UDIEN = 1 << EORSTE;		/* enable device interrupts  */
+//	UDCON |= 1 << RSTCPU;		/* reset CPU on bus reset */
+
+	ep_init();
+}
+
+void board_app_init(void)
+{
+	/* enable INT0, trigger on rising edge */
+	EICRA = 1 << ISC01 | 1 << ISC00;
+	EIMSK = 1 << 0;
+}

atusb/fw/board_atusb.h

@@ -41,4 +41,8 @@
 void set_clkm(void);
 void board_init(void);
 
+void spi_begin(void);
+void spi_off(void);
+void spi_init(void);
+
 #endif /* !BOARD_H */

atusb/fw/board_rzusb.c

@@ -25,6 +25,9 @@
 #include "at86rf230.h"
 #include "board.h"
 #include "spi.h"
+#include "usb/usb.h"
+
+static bool spi_initialized = 0;
 
 void set_clkm(void)
 {
@@ -64,3 +67,63 @@ void board_init(void)
 
 	get_sernum();
 }
+
+void spi_begin(void)
+{
+	if (!spi_initialized)
+		spi_init();
+	CLR(nSS);
+}
+
+void spi_off(void)
+{
+	spi_initialized = 0;
+	SPCR &= ~(1 << SPE);
+}
+
+void spi_init(void)
+{
+	SET(nSS);
+	OUT(SCLK);
+	OUT(MOSI);
+	OUT(nSS);
+	IN(MISO);
+
+	SPCR = (1 << SPE) | (1 << MSTR);
+	SPSR = (1 << SPI2X);
+
+	spi_initialized = 1;
+}
+
+void usb_init(void)
+{
+	USBCON |= 1 << FRZCLK;		/* freeze the clock */
+
+	/* enable the PLL and wait for it to lock */
+	/* TODO sheet page 50 For Atmel AT90USB128x only. Do not use with Atmel AT90USB64x. */
+	/*  FOR 8 XTAL Mhz only!!! */
+	PLLCSR = ((1 << PLLP1) | (1 << PLLP0));
+	PLLCSR |= 1 << PLLE;
+	while (!(PLLCSR & (1 << PLOCK)));
+
+	UHWCON |= (1 << UVREGE);
+
+	USBCON &= ~((1 << USBE) | (1 << OTGPADE));		/* reset the controller */
+	USBCON |= ((1 << USBE) | (1 << OTGPADE));
+
+	USBCON &= ~(1 << FRZCLK);	/* thaw the clock */
+
+	UDCON &= ~(1 << DETACH);	/* attach the pull-up */
+	UDIEN = 1 << EORSTE;		/* enable device interrupts  */
+//	UDCON |= 1 << RSTCPU;		/* reset CPU on bus reset */
+
+	ep_init();
+}
+
+void board_app_init(void)
+{
+	/* enable timer input capture 1, trigger on rising edge */
+	TCCR1B = (1 << ICES1);
+	TIFR1 = (1 << ICF1);
+	TIMSK1 = (1 << ICIE1);
+}

atusb/fw/board_rzusb.h

@@ -41,4 +41,8 @@
 void set_clkm(void);
 void board_init(void);
 
+void spi_begin(void);
+void spi_off(void);
+void spi_init(void);
+
 #endif /* !BOARD_H */

atusb/fw/spi.c

@@ -20,17 +20,6 @@
 #include "spi.h"
 
 
-static bool spi_initialized = 0;
-
-
-void spi_begin(void)
-{
-	if (!spi_initialized)
-		spi_init();
-	CLR(nSS);
-}
-
-
 uint8_t spi_io(uint8_t v)
 {
 //      while (!(UCSR1A & 1 << UDRE1));
@@ -60,40 +49,3 @@ void spi_recv_block(uint8_t *buf, uint8_t n)
 	SPI_WAIT_DONE();
 	*buf++ = SPI_DATA;
 }
-
-
-void spi_off(void)
-{
-	spi_initialized = 0;
-	#ifdef ATUSB
-		UCSR1B = 0;
-	#endif
-	#ifdef RZUSB
-		SPCR &= ~(1 << SPE);
-	#endif
-}
-
-
-void spi_init(void)
-{
-	SET(nSS);
-	OUT(SCLK);
-	OUT(MOSI);
-	OUT(nSS);
-	IN(MISO);
-
-#ifdef ATUSB
-	UBRR1 = 0;	/* set bit rate to zero to begin */
-	UCSR1C = 1 << UMSEL11 | 1 << UMSEL10;
-			/* set MSPI, MSB first, SPI data mode 0 */
-	UCSR1B = 1 << RXEN1 | 1 << TXEN1;
-			/* enable receiver and transmitter */
-	UBRR1 = 0;	/* reconfirm the bit rate */
-#endif
-#ifdef RZUSB
-	SPCR = (1 << SPE) | (1 << MSTR);
-	SPSR = (1 << SPI2X);
-#endif
-
-	spi_initialized = 1;
-}

atusb/fw/usb/atu2.c

@@ -180,7 +180,7 @@ stall:
 }
 
 
-static void ep_init(void)
+void ep_init(void)
 {
 	UENUM = 0;
 	UECONX = (1 << RSTDT) | (1 << EPEN);	/* enable */
@@ -245,40 +245,3 @@ void usb_reset(void)
 	UDCON |= 1 << DETACH;	/* detach the pull-up */
 	_delay_ms(1);
 }
-
-
-void usb_init(void)
-{
-	USBCON |= 1 << FRZCLK;		/* freeze the clock */
-
-	/* enable the PLL and wait for it to lock */
-#ifdef ATUSB
-	PLLCSR &= ~(1 << PLLP2 | 1 << PLLP1 | 1 << PLLP0);
-#endif
-#ifdef RZUSB
-	/* TODO sheet page 50 For Atmel AT90USB128x only. Do not use with Atmel AT90USB64x. */
-	/*  FOR 8 XTAL Mhz only!!! */
-	PLLCSR = ((1 << PLLP1) | (1 << PLLP0));
-#endif
-	PLLCSR |= 1 << PLLE;
-	while (!(PLLCSR & (1 << PLOCK)));
-
-#ifdef ATUSB
-	USBCON &= ~(1 << USBE);		/* reset the controller */
-	USBCON |= 1 << USBE;
-#endif
-#ifdef RZUSB
-	UHWCON |= (1 << UVREGE);
-
-	USBCON &= ~((1 << USBE) | (1 << OTGPADE));		/* reset the controller */
-	USBCON |= ((1 << USBE) | (1 << OTGPADE));
-#endif
-
-	USBCON &= ~(1 << FRZCLK);	/* thaw the clock */
-
-	UDCON &= ~(1 << DETACH);	/* attach the pull-up */
-	UDIEN = 1 << EORSTE;		/* enable device interrupts  */
-//	UDCON |= 1 << RSTCPU;		/* reset CPU on bus reset */
-
-	ep_init();
-}

atusb/fw/usb/usb.h

@@ -184,4 +184,6 @@ void usb_ep_change(struct ep_descr *ep);
 void usb_reset(void);
 void usb_init(void);
 
+void ep_init(void);
+
 #endif /* !USB_H */