qi-hardware/ben-wpan
1
0
Fork 0
mirror of git://projects.qi-hardware.com/ben-wpan.git synced 2024-09-30 02:17:37 +03:00
Code

atusb: updated and improved CAM script

Browse Source 
- atusb/cam2/mkmk: updated for new board
- atusb/cam2/mkmk: further increased board to board spacing, to reduce
  board deflection
- atusb/cam2/mkmk: decreased nominal mill diameter to 20 mil to compensate
  for board/tool deflection
- atusb/cam2/mkmk: added target "dplot" to visualize the sequence in which
  holes are drilled
This commit is contained in:
Werner Almesberger 2010-12-16 16:35:06 -03:00
parent d7719afb5b
commit ba310a8ce4
1 changed files with 14 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
atusb/cam2/mkmk
View File

@ -6,21 +6,23 @@ cameo <<EOF
mm mm
gerber 35mil ../atusb-PCB_Edges.gbr gerber 35mil ../atusb-PCB_Edges.gbr
align 1 8.1mm 11.2mm # align relative to board corner align 1 4.6mm 9.0mm # align relative to board corner
translate 25mm 2mm # move to PCB zone assigned to project translate 3mm 3mm # move to PCB zone assigned to project
translate 2mm 21mm # move a bit further array 20mm 37mm 3 0 # skip over previous boards
array 19mm 36mm 3 0 # skip over previous boards z 0 -58.9mm # board surface (tool fully retracted)
z 0 -56.1mm # board surface z 1.5mm # slack for extending the tool
z -0.8mm # board thickness z -0.8mm # board thickness
z -0.5mm # tool extra depth z -0.5mm # tool extra depth
clear clear
excellon ../atusb.drl excellon ../atusb.drl
drill 7mil 15mil # 12.5-13.5 mil drill drill 7mil 15mil # 12.5-13.5 mil drill
optimize
write drill.gp write drill.gp
remainder remainder
mill 32mil 0.01mm # 35 mil endmill; pretend it is a little smaller mill 20mil 0.01mm # 35 mil endmill; pretend it is a little smaller,
# to compensate for tool/board deflections
write mill.gp write mill.gp
remainder remainder
@ -40,7 +42,7 @@ cat <<EOF >Makefile
SPOOL=/home/moko/svn.openmoko.org/developers/werner/cncmap/spool/spool SPOOL=/home/moko/svn.openmoko.org/developers/werner/cncmap/spool/spool
CNGT=/home/qi/cae-tools/cngt/cngt CNGT=/home/qi/cae-tools/cngt/cngt
.PHONY: mill drill cng plot .PHONY: mill drill cng plot dplot
mill: mill:
PORT=/dev/ttyUSB0 \$(SPOOL) mill.rml PORT=/dev/ttyUSB0 \$(SPOOL) mill.rml
@ -49,9 +51,13 @@ drill:
PORT=/dev/ttyUSB0 \$(SPOOL) drill.rml PORT=/dev/ttyUSB0 \$(SPOOL) drill.rml
cng: cng:
\$(CNGT) -56.1 20 mill.gp \$(CNGT) -57.4 20 mill.gp
plot: plot:
echo 'plot "drill.gp" with points, "mill.gp" with lines' | \ echo 'plot "drill.gp" with points, "mill.gp" with lines' | \
gnuplot -persist gnuplot -persist
dplot:
echo 'plot "< sed /^\$\$/d drill.gp" with linespoints' | \
gnuplot -persist
EOF EOF