From e8d7150c28d3fd2e75eb4baf21f873298ac4058e Mon Sep 17 00:00:00 2001
From: Werner Almesberger <werner@openmoko.org>
Date: Sun, 9 Jan 2011 18:59:57 -0300
Subject: [PATCH] atusd/cam/mkmk: updated for making the 20110104 prototypes

---
 atusd/cam/mkmk | 43 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/atusd/cam/mkmk b/atusd/cam/mkmk
index 924d27e..9a01c3e 100755
--- a/atusd/cam/mkmk
+++ b/atusd/cam/mkmk
@@ -2,19 +2,25 @@
 PATH=$PATH:/home/qi/cae-tools/cameo
 PATH=$PATH:/home/moko/svn.openmoko.org/developers/werner/cncmap/gp2rml
 
+X=0
+Y=0
+
 cameo <<EOF
 mm
 
 gerber 35mil ../atusd-PCB_Edges.gbr
-align 1 4.6mm 9.0mm	# align relative to board corner
+align 1 2.5mm 8.5mm	# align relative to board corner
 translate 3mm 3mm	# move to PCB zone assigned to project
-array +2.5mm +2.5mm 0 0
+array +18mm +2.5mm $X $Y
+
 z 0 -58.9mm		# board surface (tool fully retracted)
 z 1.5mm			# slack for extending the tool
 z -0.8mm		# board thickness
 z -0.5mm		# tool extra depth
 clear
 
+# ---- 1st board ----
+
 excellon ../atusd.drl
 drill 7mil 15mil	# 12.5-13.5 mil drill
 optimize
@@ -28,6 +34,39 @@ write mill.gp
 remainder
 empty
 
+gerber 20mil ../atusd-PCB_Edges.gbr	# 35 mil endmill, 15 mil deflection
+offset
+append mill.gp
+
+clear
+
+# ---- 2nd board ----
+
+reset
+
+gerber 35mil ../atusd-PCB_Edges.gbr
+rotate 180
+
+align 1 2.5mm 8.5mm	# align relative to board corner
+translate 3mm 3mm	# move to PCB zone assigned to project
+translate 14mm 0mm
+array +18mm +2.5mm $X $Y
+
+clear
+
+excellon ../atusd.drl
+drill 7mil 15mil	# 12.5-13.5 mil drill
+optimize
+append drill.gp
+
+remainder
+mill 20mil 0.01mm	# 35 mil endmill; pretend it is a little smaller,
+			# to compensate for tool/board deflections
+append mill.gp
+
+remainder
+empty
+
 gerber 20mil ../atusd-PCB_Edges.gbr	# 35 mil endmill, 15 mil deflection
 offset
 append mill.gp